ReviewsHigh Power Module

POWLAB SMD5050 Storefront Lights, 120Ft Store Window LED Lights 240Pcs 3 Led Module Light RGB Storefront Window Strip Light Super Bright Waterproof for Business Store Light Letter Advertising

  • Super Bright LED Module Light- The led storefront light uses 3pcs premium SMD5050 LED beads for each module, which offers stable & bright lights to your store front, shop, advertisements or advertising letter signs. There are 7 colors with the light: red, green, blue, purple, yellow,white, light blue..
  • Commercial LED Light- IP68 waterproof LED module lights with sticky Self-Adhesive tape on the back of each module, It is convenient for you to install with sticky self-adhesive tape on the back of each module. You can also hang them on anywhere you want with optional screw holes.DIY your own LOGO or Lighted Store Signs..
  • Store Decorative Light - Upgrade 5050 SMD module are brighter. With ABS plastic material, The Waterproof LED module lights can work normally when it rains or snows, and it will not cause a short circuit. But you should pay special attention to the positive and negative poles of the wire to avoid short circuit. Besides, the color of the plastic will not gradually become yellow after long-term using..
  • Energy-saving LED Light- The working voltage of this super bright LED light is DC 12V.
Check Stock

Bolsen HB100 Microwave Doppler Radar Wireless Module Motion Sensor HB100, Microwave Motion Sensor, Motion Detector

  • 【Doppler Technique Microwave Induction】: The RCWL-0516 Microwave Radar Sensor Module is equipped with Doppler radar technology which is specially designed for detecting objects' motion. With high anti-jamming capability that it'll not be affected by wind, heat or other environmental factors..
  • 【RCWL-9196 Chip】: Equipped with the special signal processing chip RCWL-9196, the radar sensor module has the features of high sensitivity, long sensing distance(5-7M), high reliability, wide detection angle and wide power supply voltage range(4.0-28.0V)..
  • 【5 Ports for Varying Needs 】: 3V3(3V3 Power Output).
  • OUT(Control output. It will output high level when detect moving objects).
  • OUT will output low level all the time when the power is lower than 0.7V).
  • 【Penetration Testing Capability】: Compared with the traditional infrared induction PIR, this sensor module has the penetration detection ability..
  • 【Package Inlcudes】: 5x RCWL-0516 Microwave Radar Motion Sensor as pictured..
Check Stock

12PCS Photosensitive Sensor Module Digital Light Intensity Detection for Electronic Practice DIY

  • Product Name: GY-271 QMC5883 L module (Triple Axis Compass Magnetometer Sensor Module/3 Axis Electronic Compass Module Magnetic Sensor Module/3 axis magnetic field module)..
  • Means of communication: IIC communication protocol.
  • High quality sink gold PCB, mechanical welding process, to ensure quality.The sensor converts any magnetic field to a differential voltage output on 3 axes..
  • Wide Application: GY-271 QMC5883L 3-Axis Magnetic Electronic Compass Module is small size of only 13 mm × 14 mm, it can be accommodated in small equipments such as drones reconnaissance aircraft and robot navigation system, mobile phone, laptop computer, car navigation system..
  • Package Includes: 2pcs * GY-271 QMC5883L Triple Axis Compass Magnetometer Sensor Module + 2pcs* Pin Strip..
Check Stock

DZS Elec 6pcs XL6009 DC-DC Booster Converter Module 3V-32V to 5V-35V 4A Adjustable Step-up Voltage Regulator 5V 9V 12V 24V Power Supply Module

  • XL6009 DC-DC Adjustable Booster Power Converter Module, High efficiency non-isolated booster module can be used for booster voltage stabilizer power supply, DIY adjustable mobile power supply, booster charger, etc..
  • Input Voltage: 3V-32V, The optimal operating voltage range is 5-32V.
  • Output Voltage: 5V-35V Continuing Adjust (Step-up module, output voltage is higher than input voltage).
  • Input Current: 4A (max) Non-Load 18mA (The higher voltage, the greater no-load current.).
  • The booster power board is equipped with 4A high-efficiency MOSFET switch tube, with the conversion efficiency up to 94%..
  • Ultra high switching frequency 400KHz, the filter capacitance with small capacity can achieve very good effect, smaller ripple and the volume..
Check Stock

ZBAITU C80 80W Laser Module Kit, 10W Optical Diode Laser Module for Engraver Cutter, 10W Laser Head for DIY Metal Wood Leather Acrylic Glass, Compatible Most Laser Engraving Cutting Machine, 12V

  • 【Wide Compatibility】The attached adapter cable and dovetail slider can help the ZBAITU C80-EAIR laser module to be compatible with most laser engraving and cutting machines on the market, also compatible with other machines that use 12V input voltage, you don't need to repurchase a laser engraving machine to improve engraving and cutting efficiency, high cost performance.
  • 【Air Assist】ZBAITU C80-EAIR Air assist laser module can blow away scrap and smog during engraving and cutting, boost effect, engraving and cutting more refined, reduces yellow smoky marks on the edges of the cutting line, the most important is to reduce the pollution to the lens to ensure the service life of the laser module.
  • 【High Power】The ZBAITU C80 EAIR laser engraving module has a 10W laser output power, it can quickly engrave metal, wood, leather, glass, and acrylic etc. The C80 EAIR laser cutting machine module is also excellent on cutting function, it can cutting 5mm plywood in one pass.
  • 【Ultra Accuracy】The newest FAC technology compresses the laser point of the ZBAITU C80 EAIR laser module to 0.08mm, the lines for engraving....
Check Stock

Bridge Rectifier, 3Pcs AC to DC Power Conversion Module, 1N4007 Full Bridge Rectifier Filter Power Supply Module for Model Train Railroad LED (Input AC 6V-16V (capacitance 25V1000UF))

  • AC to DC power converter module, 1N4007 full wave bridge rectifier filter. Module size: 31x14x20mm/1.22x0.55x0.78inch, wire Length: 90mm/3.54inch..
  • This product is a streamlined rectifier filter module, widely used in small rectifier output filter, mainly used in the power requirements of the electrical is not very high..
  • The power module design can be put into a smaller small electrical box, the circuit Board above the design of power indicator light, easy to turn on the power supply can be intuitive to know the power status..
  • Rectified output voltage: output = input x1.414 . Example: input 12V AC, then the output 12x1.414 = 16.968V, which is the calculated result of no-load voltage, only a reference, the actual deviation..
  • Please NOTE: plug-in products, manual soldering, inconsistent capacitor pin height is a normal phenomenon. AC input voltage [6V-16V] (capacitance 25V1000UF).
  • AC input voltage [6V-32V] (capacitance 50V470UF), please seclect the one you need..
Check Stock

5pcs 405nm Violet/Blue 5mW Laser Diode 5.6mm TO-18 LD for DIY Laser Module

  • 5mw Industrial class 532nm Green Laser Dot Module.
Check Stock

NOYITO 2-Channel 5V Computer USB Control Switch Relay Module Drive-free relay module Plug and Play Suitable for PC Smart Controller

  • The module uses HID technology, without any driver, plug and play. Support WIN7,10, XP 32-bit, 64-bit system, easy to use simple..
  • Onboard square USB interface, stable connection.
  • use of high-performance USB control chip.
  • use dedicated relay driver chip ULN2803, relay work more stable.
  • Power outlet and terminal, two access power mode convenient and flexible. After connecting the power, even if the computer shut down or USB from the computer pull out, the relay can also maintain the set state..
  • 【NOTE: The 1-Channel 2-Channel module does not require an external power supply. 4-Channel 8-Channel modules require an external module power supply. 】PCB size: 56.5mm * 40.6mm, fixed hole size: 3mm, fixed hole center moment: 52.2mm * 36.6mm..
Check Stock

DollaTek 5V ESP8266 Four Channel WiFi Relay IOT Smart Home Cellphone APP Remote Control

  • On board high quality MCU and ESP-01WIFI module Two working mode : Mode 1:cellphone carry on wifi module directly Mode 2:cellphone and wifi module carry on router together Additional function :work as USB module when disconnect ESP-01 module.
  • Transmission distance: (1) the open environment, the mobile phone when carrying on the WIFI module maximum transmission distance of 100 m.
  • (2), when the WiFI module and cell phone carrying on the router at the same time the signal transmission distance depends on router signal.
  • Use the Smartconfig technology to complete the configuration of the account and password of the esp-01 WIFI module on the mobile APP. The configured account and password will be memorized after power off.
  • The board contains 5V,10A/250V AC 10A/30V DC relay, which can continuously absorb 100,000 times, with the protection of diode current and short response time..
  • With mode option and working statue LED indicator.With 4 isolator and strong anti interference ability.Reserved UART debug interface and MCU download port for program.
Check Stock

Acxico 2 pcs ESP8266 ESP-01S + 5V WiFi Relay Module Smart Home Remote Control Unlock Board

  • This module uses genuine relays and normally open interfaces. High stability and low power consumption..
  • Strong driving ability, stable and reliable performance. High efficiency, fine workmanship, and durable..
  • Add one more ESP-01S module. This smart relay module is based on the ESP-01S WIFI module design. It can be used to DIY your own smart switch. It can be remotely controlled by the mobile phone APP and provides APP and LUA source programs. It's easy to use right away..
  • The package includes：2 pcs ESP8266 ESP-01S Relay module, relay WIFI smart socket (with ESP-01S).
  • We are very grateful for all customers’ opinions to improve sales, if you are not satisfied, please contact us to find the best solution.
Check Stock

12V to 5V Direct Current Converter Buck Module USB Output Power Adapter Direct Current Power Adapter Converter Regulator Car Power Converter (3)

  • Parameter: these usb buck module input voltage range DC 12V and output voltage default DC 5V, the maximum output current is 3A, no-load current is 10mA and the maximum output power will reach 15W.
  • USB and high conversion: this DC to DC converter module has USB charging ports, DC to DC buck converter has integrated switch thin regulator module, the conversion rate is as high as 96%.
  • Intelligent protection: this 12V to 5V DC converter is using intelligent microprocessing chip, over voltage, over current, over temperature and short circuit, it can be auto protection.
  • Wide application: DC converter module 12V to 5V is widely applied for GPS navigation, driving recorder, electronic dog, car radio, MP3, MP4, walkie talkie, surveillance system, bus display, taxi advertising screen, LCD TV, LED, etc..
  • Warm prompt: the power of devices must be lower than 15W when using this DC to DC converter 12V to 5V, and not compatible with partial Samsung phones.
Check Stock