ReviewsHigh Power Smd Module

GIGABYTE Z790 AORUS Elite AX (LGA 1700/ Intel Z790/ ATX/ DDR5/ Quad M.2/ PCIe 5.0/ USB 3.2 Gen2X2 Type-C/Intel WiFi 6E/ 2.5GbE LAN/Q-Flash Plus/PCIe EZ-Latch/Gaming Motherboard)

Intel LGA 1700 Socket: Supports 13th and 12th Gen Intel Core Series Processors.
DDR5 Compatible: 4*SMD DIMMs with XMP 3.0 Memory Module Support.
Commanding Power Design: Twin 16+1+2 Phases Digital VRM Solution with 70A Power Stage.
Cutting-Edge Thermal Design: M.2 Thermal Guard III, Fully Covered MOSFET Heatsinks, PCIe Ultra Durable Armor, 6-Layer PCB.
Next Gen Connectivity: SMD PCIe 5.0, 4* PCIe 4.0 x4 M.2, USB 3.2 Gen 2x2 Type-C.

Check Stock

Aoicrie 5Pcs DC 5V 1 Channel Relay Module Board Shield with Optocoupler Isolation Support High or Low Level Compatible Development Board Trigger

This Relay Board Maximum load: AC 250V/10A, DC 30V/10A With power and relay action indicator.each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground..
Main Specification Peak Load of NO Connector: AC 250V/10A, DC 30V/10A.
These Relay Board use photocoupler isolation that has strong driving ability and stable performance.The isolation circuit prevent damages to I / O port by relay switch current.The module has a jumper so you can set rather the unit state changes with high or low signal. Has screw terminals for relay (NC,C,NO) and for input.
Using SMD optocoupler isolation, strong driving capability, stable performance.Fault tolerant design, even if the control line is broken, the relay will not operate.
And interface design humanized, all the interface can be directly connected through the terminal lead, so convenient..
Wide Application These 5V relay board works well with for ARM /PIC /AVR /MCU/Raspberry/CNC machine /etc..

Check Stock

Aoicrie 5Pcs DC 12V 1 Channel Relay Module Board Shield with Optocoupler Isolation Support High or Low Level Compatible Development Board Trigger

This Relay Board Maximum load: AC 250V/10A, DC 30V/10A With power and relay action indicator.each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground..
Main Specification Peak Load of NO Connector: AC 250V/10A, DC 30V/10A.
These Relay Board use photocoupler isolation that has strong driving ability and stable performance.The isolation circuit prevent damages to I / O port by relay switch current.The module has a jumper so you can set rather the unit state changes with high or low signal. Has screw terminals for relay (NC,C,NO) and for input.
Using SMD optocoupler isolation, strong driving capability, stable performance.Fault tolerant design, even if the control line is broken, the relay will not operate.
And interface design humanized, all the interface can be directly connected through the terminal lead, so convenient..
Wide Application These 12V relay board works well with for ARM /PIC /AVR /MCU/Raspberry/CNC machine etc..

Check Stock

Weewooday 15 Pieces 5V Relay Module 1- Channel Relay Control Boards with Optocoupler Isolation High and Low Level Trigger Expansion Board

Relay module: this relay board supports high and low level trigger and can be controlled by any 5V digital output of the microcontroller.
Parameter details: maximum load of normally open interface: AC 250v/ 10A, DC 30v/ 10A, trigger current is 5mA.
The 5v relay control board adopts SMD optocoupler isolation, which has strong driving ability and stable performance.
Practical design: with fault-tolerant design, the relay module will not operate even if the control line is disconnected.
All interfaces can be provided through directly connected terminal s since the humanized interface design, it is very convenient to use.
High compatibility: the relay module can be directly controlled by the 5V logic signal provided by the microcontroller, suitable for 8051, Raspberry Pi, PIC, DSP, ARM, AVR, MSP430, TTL logic, etc..
Wide application: this 5V relay board can be applied with Raspberry/ CNC machine/ ARM/ PIC/ AVR/ MCU/ PS4 and more.

Check Stock

200pcs 160 Deg DC 12V Daylight White 0.72W Injection LED Module Backlight 2835 SMD Waterproof Decorative Light for Letter Sign Advertising with Tape Adhesive Backside

3 LED 2835 SMD Module, Color :White, 12V DC input voltage..
20 modules per string, 14.4 watt per string, cuttable, power supply NOT included.
Applications: Store, Restaurant, Coffee, Bar, Bank, Airport, Railway, public advertise and notice .Channel Letters Backlighting, Advertisement Signs, and Signage letters.

Check Stock

EC Buying AD620 High Accuracy Low Power Programmable Instrumentation Amplifier Module Voltage Amplifier Module Differential Amplifier Single-Ended/Differential Small Signal/Small Amplifiers Module

... range of 1 to 10,000. Ideal for portable (or remote) applications. With high accuracy, low offset voltage, and low offset drift, the AD620 is ideal for precision data acquisition systems such as electronic scales and sensor interfaces. Also features low noise, low input bias current, and low power consumption. The module has a fixed voltage output..
♥Basic Features: ✭Module Name AD620 Instrument Programmable Amplifier ✭Module size:50mm * 50mm ✭Module power supply: 5V-24V ✭Module input signal type: single-ended signal or differential signal ✭Module signal input and output range: the input signal range is within 100 microvolts of the power supply, and the output signal range is within the power supply ✭Module bandwidth: AD620: 120KHz (G=100), AD623: 800KHz (G=1), AD620/623 is lower than 50KHz at high gain, and higher than 1MHz at low gain.
♥ Other Features: ✭Module gain: When there is no solder slip, the AD620 will zoom by 10 times by default, and the AD623 will zoom by 20 times by default. During welding slip, AD620: G=1+50K/Rg, AD623: G=1+100K/Rg ✭Maximum magnification of the module: more than 2000 times (actual measurement), due to the large gain of the waveform frequency band, it is recommended to use multi-stage amplification wi....

Check Stock

Valefod DC 5V Relay Module 1-Channel Relay Switch with Optocoupler Isolation High/Low Level Trigger, Pack of 10

【Control Devices】The 1-channel relay module uses genuine high quality DC5V relay and SMD opto-isolator supporting high/low level trigger, widely apply to control various AC/DC appliances, and other devices with large current..
【Load Range】NO(Normally open) maximum load < AC 250V/10A, < DC 30V/10A. Trigger current of opto-isolator: 5mA..
【Fault-tolerant Design】The relay will not operate even if the control line is disconnected..
【Universal Interface】Equipped with screwed terminal plate and fixed bolt holes(diameter: 3.1 mm) on both sides for easy installation..
【High Compatibility】The relay module can be controlled directly by 5V logic signals from microcontroller(8051, AVR, PIC, DSP, ARM, Raspberry Pi, MSP430, TTL logic etc).

Check Stock

Thermal Grizzly Hydronaut - Conductive, High Performance Thermal Paste - Extensive for air Cooling Systems, Water Cooling, for All heatsinks CPU and GPU (26 Gram / 10 ml)

...oxic, tasteless, anti-corrosion, wear-resistant, anti-static, flame retardant, compression and good insulation..
Wide application-One pad is multi-purpose, insulated and non-conductive, perfect substitute for traditional radiator compound grease, suitable for graphics card memory North and South Bridge, RDRAM memory module, communication equipment, SSD solid state hard drive, game console equipment, car control device, control board, motor, electronic products, CPU, GPU, radiator, power LED, automotive machinery, computer host, laptop, DVD, VCD, cover, set-top box, LED IC SMD dip and any cooling module..
Good Plasticity. Good elasticity and compression properties, contact with any electrical traces wouldn’t result in damage of any sort. A great assistant for both beginners and professionals..
After-sales Service. We committed to provide superior thermal pads, easy to install, feel free to contact us if there is any issue with our thermal pads.

Check Stock

Isolation Amplifiers 4.5 - 5.5 SV 8 dB (10 pieces)

【QUALITY GUARANTEE】The Digital Audio Amplifier Power Module is made by a professional manufacturer and has undergone multiple tests. It has a very good quality guarantee and a 100% brand new high-quality brand..
【HAVE A DIGITAL CHIP】The Digital Audio Amplifier Power Module is equipped with PAM8403 digital chip, which is a small digital amplifier chip, which can highlight the advantages of digital chip and bring you a good experience..
【POWERFUL FUNCTIONS】The circuit of the Digital Audio Amplifier Power Module adopts reasonable configuration, the power filter is upgraded to 470 uf, and with 1.6 mm glass fiber board, it has excellent performance and powerful functions..
【HI-FI SOUND QUALITY】The Digital Audio Amplifier Power Module outputs 3 w + 3 w high-fidelity sound quality, which can restore the most realistic scenes and bring you a good experience. It is a rare good choice for you.
【THE ANTI-METER BODY】The Digital Audio Amplifier Power Module adopts the original anti-meter body, and the potentiometer with counterclockwise switch can directly cut off the power supply. It is safe and you can buy it with confidence..

Check Stock

SX1278 USB Test Board 433MHz 470MHz E32-400TBL-01 UART Wireless Module E32-400T20S

The SMD uart module has been soldered to the test board and can be tested directly after purchare. One set of test kits cannot perform communication tests. It is recommended to get two or more sets..
Shipping List: E32-400T20S and its testboard, one set.
Warranty: We have 1 year warranty. If you need user manual or any problems contact with us free..

Check Stock

WICHEMI Storefront LED Light Modules 200PCS LED Module for Signs Daylight White 6500K Injection 1.32W 12V DC 2835 SMD 3 LED Business Window Lights Waterproof for Letter Advertising Decor

Light Color: Daylight White 6500K. 3 LED 2835 SMD Module, 12V DC input voltage..
10 String per Pack, 20 pcs modules per string, 26.4 watt per string (20pcs*1.32W), total 216 feet. (Not include power supply transformer and remote control).
Low power consumption, high energy efficient, long life time with 50000 hrs, virtually no maintenance during lifetime. Easy for installation.
You can cut it each led into the length you want, DIY your own light box, storefront light, LOGO sign, lighted store signs or holiday vibe decor. Ideal for indoor and outdoor different DIY applications, making them more distinctive and attractive in the night..
Wide Application: Store, Restaurant, Coffee, Bar, Bank, Airport, Railway, public advertise and notice .Channel Letters Backlighting, Advertisement Signs, and Signage letters.

Check Stock