ReviewsHigh Pressure Fuel Regulator

SUPERFASTRACING Fuel Pressure Regulator 58 PSI /Filter EFI Swap LS w/ 6AN fittings Kit For C5 Corvette

  • ▶This is an OE style filter-regulator as used in the 1999-2014 C5 Corvette And 3/8" fuel filter feed-line fitting,3/8" male to -6AN straight filter fitting, 5/16" fuel filter return-line fitting..
  • ▶【Interchange Part Number】:GF822, 10299146, 19239926, 33737.
  • TBSS intake, NNBS Intake, L92 Intake, returnless..
  • ▶【NOTE】:The C5 Filter/Regulator is capable of flowing a maximum of 255LPH..
  • ▶This fuel filter features an internal bypass that regulates fuel output pressure to 58psi (4 Bar)..
  • ▶This filter/regulator assembly is commonly used when adapting return style fuel systems for use with returnless applications..
Check Stock

Injector Pressure Regulator Valve - IPR Valve - Compatible with Ford Trucks - Powerstroke 6.0L Diesel - E-350, Excursion, F-250, F-350 Super Duty - Replaces 5C3Z9C968CA, CM-5126, 5C3Z-9C968CA, AP63417

  • Replacement Injector Pressure Regulator Valve - regulates the oil bypass circuit of the high pressure oil pump. It is an electromagnetic valve that opens and closes to allow high pressure oil into the injectors. This enables the PCM to control fuel delivery by increasing the speed in which the IPR valve operates thus, being a critical component in your vehicle system..
  • Compatible Replacement for Ford 6.0L Vehicles - 2005 E350 Club Wagon | 2005 - 2010 E350 Super Duty | 2005 Excursion | 2005, 2006, 2007 F250 Super Duty | 2005, 2006, 2007 F350 Super Duty |. The injector pressure regulator valve can be located after removing the intake and the fuel filter housing above the engine which can be seen attached to the high pressure oil pump (HPOP)..
  • Replaces Part# 5C3Z9C968CA, 1846057C1, CM-5126, 5C3Z-9C968-CA, AP63417 - commonly found on popular F-250, F-350 Super Duty, E-350 and Excursion models with 6.0L V8 Diesel Powerstoke Engines including years 05, 06, 07, 08, 09, 10. If you are experiencing no or hard starting when the engine is hot or after stalling and usually starts when it is cold or your vehicle is idling erratically or jerking then you may have a problem with your IPR valve..
  • OEM Fit, Quality, Finish - While this is not a genuine OEM part, this inj....
Check Stock

FST Performance RPM350 FloMax 350 Clear Anodized -6/-8 AN Port Fuel Filter/Water Separator System

  • High fuel flow capabilities and extremely low fuel flow restriction coupled with highly efficient 4 micron filtration.
  • Designed for use in gasoline, racing fuel, ethanol, and methanol in a wide variety of motor sports applications and engineered for either suction or pressure side mounting.
  • Multiport design allows unused fuel ports to function as a fuel system drain, regulator mount, fuel pressure gauge port, flows 300 gallons per hour with a filtration efficiency of 4 microns and burst pressure for this unit is 250 PSI.
  • Filter measurements are 4.25 inch height, 3 inch width and 3.75 inch depth.
  • unit weight is only 19 ounces and features 1/2 inch NPT (pipe threads) ports.
  • made of solid billet aluminum to eliminate porosity, leaking or air intrusion.
Check Stock

EVIL ENERGY EFI 255LPH Electric Intank Fuel Pump High Flow 43PSI Kit

  • EVIL ENERGY intank fuel pump fit for 12V DC EFI system only..
  • Test flow:255LPH (43PSI), 190LPH (80PSI), Operating Pressure: 15-90 PSI, final fuel pressure set by regulator..
  • Applicable fuel: gasoline, E85 and ethanol gasoline with less ethanol content than E85. (high impurity gasoline will directly affect the pump life).
  • The diameter of 255LpH high-flow INTANK electric fuel pump may be different from the original model, but it will not affect the use.Hoses, filters or other equipment may need to be replaced.Professional installation is highly recommended..
  • EVIL ENERGY provide EFI fuel pump product 6-month warranty. Any problem you might have, please feel free to contact us via Amazon message..
Check Stock

Fuel Filter/Regulator 4 BAR with -6AN Inlet and Outlets Stainless Steel for LS swaps and EFI conversion

  • Fuel filter & pressure regulator for LS swap with no adapter fittings required..
  • 58 PSI (4 BAR) regulated pressure output, perfect for LS swaps and many EFI conversions..
  • Aftermarket 5 micron fuel filter and pressure regulator manufactured with AN -6 inlet and outlets..
  • Connect directly to your -6AN hose or hard line..
  • For custom/aftermarket application only. AN-6 ends will not fit hoses in original GM application..
Check Stock

YSTOOL Fuel Pressure Tester Gauge Kit 140PSI Automotive Engine Injector Pump Test Gasoline Gas Injection Manometer Tool Set with Inline Fitting Schrader Adapter for Auto Car Motorcycle (Blue Case)

  • ... airtightness & anti-corrosion. Reinforced rubber resin nylon hoses (WP:300PSI) are resistant to torsion & high temperature.
  • After testing the fuel pressure by YSTOOL gasoline engine fuel injection pressure tester, compare the reading with the recommended pressure range. If higher, it could be a faulty fuel pressure regulator or a bent clogged return line. If lower, possible causes are dirty fuel filter, weak pump function, incorrect fuel tank exhaust, restricted fuel line, clogged pump inlet filter or electrical control failure. Petrol is highly flammable, please ask professionals to operate with no open fire nearby.
  • Your satisfaction and recognition are always what we pursue. Within one month from the date of purchase, the product can be returned unconditionally if it is complete and without any damage. Within one year warranty period, any quality issue with the product, you are promised to exchange or refund the problematic parts for free. Please contact us to resolve any issues during your use before leaving any feedback..
Check Stock

7.3L Fuel Injection Pressure Regulator Sensor, IPR Valve & ICP Control with Electrical Connector Pigtail Wire Harness Sensor for Ford F-250 F-350 F-450 F-550 F-650 F-750 E-350 E-450 E-550, 1829856C91

  • ...50 Econoline Club Wagon 02, fit for Ford E-450 Econoline Super Duty Stripped 01, fit for Ford Excursion.for 01 Ford F-650 00-01, fit for Ford E-450 Econoline Super Duty 00, fit for Ford F-250 F-350 97 - 7.3L Powerstroke ONLY.
  • [Part Number] - 7.3 IPR fuel injection pressure regulator valve replace F81A9C968AA, F81Z9C968AB, AP63402, F81Z9C968AA, F81Z9C968AB, F81Z-9C968-AB, F5TZ9C968A, 1841217C91, 1829856C91, 1836412C91, 1841086C91, CM5013, CM-5013 for a proper fit, include IPR Valve and ICP control sensor seal kit..
  • [Durable] - Every 7.3 IPR fuel injection pressure regulator valve and ICP control sensor have passed undergoes more stringent testing than aftermarket products, engineered for long lasting performance, durability, and dependability..
  • [Installation] - 7.3L fuel injection pressure regulator IPR valve + ICP control sensor installation is super easy and direct fitment and perfect replacement, meets or exceeds OEM standards. We offer 2 years service, any questions about the product, pls contact us in time. We will reply to you within 24 hours.
Check Stock

NEW HOLLEY 110 GPH BLUE ELECTRIC FUEL PUMP WITHOUT REGULATOR,STREET & STRIP CARBURETED APPLICATION,COMPATIBLE WITH GASOLINE ONLY,12 VOLT

  • Brand New Holley 110 GPH Blue Electric Pump without Regulator, Street/Strip Carbureted Applications, Compatible with Gasoline Only (Part #12-812-1).
  • Features: Tumble polished billet look | Lower housing casting designed for enhanced fuel flow | Motor draws only 3 amps current | 7 1/2 amp fuse recommended | Improved design for street/strip applications | Not designed to be used on aircraft of any type | Distinctive Blue logo | Flows 110 GPH (free flow) | Flows 88 GPH at 9 PSI | Maximum pressure is 14 PSI | Provides constant fuel flow with no pulsation.
  • Has externally accessible pressure relief valve (max 14 PSI) | Rotor/vane pump design is more tolerant of contaminated fuels | Weighs only 3 lbs | Includes mounting bracket | Repair kits are readily available | Can be serviced from the pump end | Not compatible with alcohol or methanol fuels | Use of safety shut-off switch, P/N 12-810, strongly recommended | Not designed or recommended for use with fuel injection systems | Fuel pressure regulator not included.
  • Specs: Application: Universal | Bracket Color: Silver | Brand: Holley | Emission Code: 5 | Free Flow GPH: 110 | Free F....
Check Stock

Innova 3640 Professional Fuel Injection Pressure Tester

  • Helps identify and diagnose low fuel pressure a faulty fuel pressure regulator leaking injector(s) fuel leaks and/or clogged fuel filters.
  • Properly rated fuel hose and brass fittings make this tool a step above the rest in quality and longevity.
  • Large easy-to-read 2" dial face with 0-100 PSI scale.
  • Durable 16" gauge hose and 6-foot bleed-off hose with solid brass fittings.
  • Includes Ford GM and Chrysler test adapters and a "Tee" adapter for import vehicles.
Check Stock

SUNROAD 0-140 PSI Universal Adjustable Fuel Pressure Regulator Kit With Gauge Hose Blue FPR

  • Universal Replacement for All Type Cars.Used to Keep the Stable Pressure in the Fuel System.
  • Adjustable Alumium Fuel Pressure Regulator,So You Can Tune the Fuel Pressure to Your Needs.Adjustable From 0 PSI to 140 Maximum Fuel Pump Capacity.
  • Improve Fuel Delivery Efficiency Without Changing Computer Oil Supply Mode,Save Much Money.
  • Provide the Highest PerReplacement formance,Reliability and Long Lifespan Replacement for Your Vehical.
  • No instruction included,professional installation is highly recommended.
Check Stock

6.0 Blue Spring Kit Upgrade,Ford Blue Spring Kit 6.0 Powerstroke Fits 2003 2004 2005 2006 2007 F250, F350, F450, F550- Replaces 3C3Z-9T517-AG Fuel Pressure Regulator Kit

  • Compatibility: The Fuel Regulator Kit fit for 2003 2004 2005 2006 Ford 6.0L Powerstroke F250, F350, F450, F550.
  • Functions of the 6.0 blue spring kit upgrade :increase fuel pressure 10-15psi ,increases fuel injector life of your Ford 6.0 Powerstroke..
  • Easy installation: complete kit with all accessories for installation, few minutes done..
  • Package including: blue spring upgrade+ fuel pressure regulator housing+4*rubber o-ring seals+ 3*orifice seals+4*screws.
Check Stock