ReviewsHigh Pressure Fuel Tube

NEW DAFU 1/4 Inch 6mm ID NBR Nylon Braided Fuel Line Set,5 Ft＋6 Pcs 2/5 Inch ID Hose Clamps,For Motorcycle Kawasaki Kohler Briggs Stratton Small Engines,Boat Marine Outboard Gas Diesel Petrol

  • ...wo parts are compatible with each other,You can use them directly without additional purchases..
  • Wall thickness is 3mm:Contains 3 layers of material:1.The outer layer is Chloroprene rubber with good elasticity.
  • 2.The middle layer is Nylon Braided,Which increases the working pressure (300PSI / 2MPa) and the maximum burst pressure (1200psi / 8MPa).
  • 3.The inner layer is NBR,which can increase oil resistance,acid and alkali resistance,and resist various corrosive liquids.The thickened tube makes you feel at ease, No worries about leakage..
  • Our fuel line's main material is: NBR (copolymer of butadiene and acrylonitrile),Which makes our fuel line more resistant to high/low temperature (- 30 °C~120 °C) and aging compared with other common fuel lines,It will not crack and its performance ↑ 50%.No matter in extremely cold areas or high temperature desert, It will always accompany your vehicle to arrive the destination safely.
  • The service life can be up to 9 years,3 times more than the other ordinary fuel lines,So the fuel line will not leak under any circumstances,And keep good working condition,Don't worry about your ve....
Check Stock

JIFETOR Universal Auto Gasoline Gas Fuel Injection Pressure Tester Gauge Tool Set Only for Bosch CIS System Car Truck SUV Motorcycle ATV RV SUV Blue Case

  • BOSCH CIS DEDICATED SYSTEM: Fuel pressure test gauge kit includes 1PC fuel pressure gauge tester with rubber hose and drain hose, 1PC hose assembly for Bosch CIS (Continuous Injection System), and 9PCS metal adapters. More professional, more efficient. Specifically recommended for use with import and domestic gasoline vehicles including cars, SUVs, and trucks using Bosch CIS systems. If you need a full system of fuel injection pump set please serach for B085TM8577 in our store..
  • FUEL INJECTION GAUGE TESTER: Fuel pump pressure tester is an essential part of the troubleshooting process of automotive fuel injection systems. Gauge is made to detect bad fuel pumps, bad pressure regulators, leaking injectors and clogged fuel filters. Fuel injection tester features 4" big dial, built-in hoses with pressure relief valve, and quick coupler system. Low pressure range (0-140 psi/0-10 bar) makes it limited to gasoline engines for fuel pressure test..
  • HOSE WITH METAL ADAPTERS: Fuel pressure gauge set contains 1PC built-in 43" long rubber hose with 44" clear drain hose, and 1PC 27.5" Bosch CIS- specific hose valve assembly for test connection. Rubber hoses endure torsion, temperature and pressure extremes to ensure safe use. Brass for corrosion resistance, and ducti....
Check Stock

GSL392 Inline Fuel Pump & 58 PSI Fuel Filter Regulator 58 PSI LS Swap Fuel Pump EFI Conversion Fuel Filter Pressure Regulator 255LPH High Pressure External Pump 6AN Fittings 400-939 GSL392-400-939

  • REPLACEMENT 58 PSI FUEL FILTER REGULATOR - Fuel pressure regulator filter kit comes with 6AN adpater fittings for LS Swap , which can deliver 58 PSI (4 BAR) to your fuel rail and return unused gas to the tank. Besides, it can ensure the clean fuel is delivered properly to your engine with a 10 micron fuel filter, which play an important role in protecting the daily operation of the engine, and extending the engine service lifespan..
  • GSL392 HIGH PRESSURE FUEL PUMP - LS Inline fuel pump is designed to start higher-pressure fuel racing or performance-purpose vehicles stably and safely, which can help to meet the requirements of most modern turbocharging applications. At 80 PSI, Yinlowa 255 lph high pressure fuel pump can flow around 132 liters (35 gallons) per hour.
  • At that same 80 PSI the equivalent HP (high pressure) fuel pump can flow over 210 liters (50 gallons) per hour.
  • FITMENTS - GSL392-400-939 Inline Fuel Pump fits EFI applications including turbo and supercharged, variety of pressures and flows available, including high pressure performance.
  • 58 PSI Fuel Pressure Regulator AN-6 Fittings for LS Swap EFI Conversion i....
Check Stock

Actron CP7818 Fuel Pressure Tester Kit,Black

  • Actron's Fuel Pressure Tester Kit works on most domestic fuel injected vehicles having a Schrader valve test port on the fuel rail.
  • Use on the following: Ford high pressure central fuel injection and GM, Ford, and Chrysler multi-port fuel injection - multi-port means one fuel injector per cylinder.
  • Tests: fuel pump check valves (leak down test), fuel pressure regulators, weak fuel pumps, fuel line integrity (clogged or damaged fuel filters), leaking injectors.
  • Kit includes: large easy-to-read 2-1/2 inch gauge with standard (0-100 psi) and metric (0-700kPa) scales, Ford fuel line adapter, solid brass fittings, & pressure relief valve for safe, clean testing.
Check Stock

ABN Fuel Injection Pressure Test Kit – Comprehensive Universal Set with Improved Flex Hoses, Fittings, and Instructions

  • TEST INJECTOR SYSTEM FUEL PUMPS: The new and improved ABN Comprehensive Universal Fuel Pressure Tester Master Fuel Pressure Gauge Kit is a complete fuel test gauge package that quickly tests the fuel pump pressure on injector systems.
  • NEW & IMPROVED: High-quality fuel pressure gauge hose replacements have been improved with implanted fiber.
  • Fitted with quick coupling system and pressure release valve fitting with long drain hose to prevent inadvertent discharge of fuel while testing and to allow for safe recovery of fuel.
  • Fuel injection pressure gauge displays reading 0-100 PSI and 0 to 7 Bar.
  • FITS YOUR VEHICLE: Automotive fuel pressure test kit adapters fuel gauge kit has all necessary fittings to attach to a pressurized system.
  • Will work on any vehicle as long as it has a Schrader test port fuel injection system or as long as you can splice an inline connection.
  • Recommended for older low-pressure systems with mechanical fuel pumps.
  • Not compatible with Bosch, CIS-Jetronic, or GM throttle body systems.
  • EASY STORAGE: Heavy-duty 2.3” x 12.8” x 11” inch (5.8cm x 32.5cm x 27.9cm) plastic blow-molded carrying case for easy transportation, safe storage, and quick organization of each component of this fuel injection pressure kit.
Check Stock

JIFETOR Fuel Injection Pump Pressure Test Gauge Set, Automotive Gas Gasoline Fuel Oil Injector Tester Tool Kit 0-140PSI, with Schrader Adapters Universal Compatible with Ford Auto Car Truck Motorcycle

  • FUEL PRESSURE GAUGE TESTER: Automotive fuel injector tester tests if the fuel supply & injection system work normally, help to judge if there are broken internal components or faulty oil lines. Specific tool for fuel system detecting and troubleshooting. Fuel pressure gauge kit suits a variety of gasoline engines on car, truck, SUV, Motorcycle, ATV, RV, etc (Bosch, CIS Jetronic, Throttle Body System on GM vehicles excluded), not for diesel high pressure injection pump or direct-injection engine.
  • UPGRADED FUEL PRESSURE GAUGE TOOL KIT: The set is equipped with various fittings and hoses to connect for testing. 15"L hose is used for hooking up directly to the 1/4" SAE standard Schrader valve on fuel pump, 5-1/2"L hose for small Schrader valve (compatible with some Ford), and 8"L hose for M6 fuel pressure test port, and there are also M8/M10/M12/M14 adapters for the corresponding test port on fuel rail. The aluminum tee can splice in-line between the fuel pump and engine for most vehicles.
  • 140PSI/10BAR PRECISION-MACHINED FUEL PUMP TESTER GAUGE: You just need to ensure there is an adapter in the kit suitable for your test port or the inline connection is workable for your car. Pressure gauge adopts rubber cover protected 3-1/2" large dial and dual color cod....
Check Stock

ASD Brake Line Fittings Assortment For 1/4\ Tube (7/16\ - 24 Thread, Inverted Flare) (Pack of 15-5 Short Nuts, 5 Long Nuts, 5 Unions)

  • Auto Supplies Direct 1/4" Brake or Fuel Line Fittings Assortment for Cars and Trucks.
  • Total of (15) 1/4" Tube Line Fittings- (5) 1/4" Tube Nuts, (5) 1/4" Long Tube Nuts, (5) 1/4" Unions.
  • Most common SAE inverted flare / Double flare size.
  • Compatible With 1/4" Steel, Copper, Nickel, Poly Armour, and Cupronickel Tubing.
  • High Pressure Resistant, Constructed From Safe and Professional Quality Brass, Lead Free.
Check Stock

Fuel Pressure Gauge Kit，0-140 PSI Fuel Pump Tester，Fuel Injection Pressure Tester Updated TU-114 Fuel Pressure Tester Kit Gas Oil Pressure Tools Gasoline Tester Tool

  • 【ACCURATE READING】 Measuring range: 0-140psi (0-10 bar),2.5" gauge.Easy to read dual scale gauge, gasoline presure tester Can provide accurate readings and check whether there is sufficient fuel flow.The Fuel pressure tester can quickly indicate if fuel pump is defective or inconsistent in pressure flow..
  • 【HIGH-QUALITY MATERIALS AND EASY TO CARRY】 The fuel pressure gauge uses metal gauge head with shockproof rubber cover.The material of the fuel pressure tester kit consists of Copper, Rubber, ABS Plastic, Iron, and Aluminum. Anti-corrosion materials to ensure long lasting using life.Nylon resin hose is resistant to fuel, wear and corrosion.Durable plastic blow-molded case to protect components and provide easy transport and organization，Items are protected well in a sturdy case..
  • 【REGULAR CHECK FUEL INJECTOR PUMP PRESSURE】 High or low fuel pressure can cause many engine problems.It is mainly used to test whether the fuel supply and injection system are working normally, and to determine whether the internal components are damaged or the oil circuit is faulty. You can troubleshoot possible problems based on the vehicle manufacturer's user manual..
  • 【AFTER-SALES SERVICE】Package Included: 1x Fuel Injection Pressure Tester, As Picture Show....
Check Stock

Quickun Brass Compression Fitting Ferrule Sleeve, 3/16\ Tube OD (Pack of 30)

  • Sleeve for a tube compression fitting.Connects to copper, brass, aluminum, or plastic tubing..
  • This Metals sleeve compression tube fitting is made of brass, connects to a tube, and is suitable for use with fuel and gas systems..
  • 3000 PSI working pressure, Temperature range of -55°F to 250°F (-53°C to 121°C).
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

Quickun Brass Compression Fitting Ferrule Sleeve, 1/8\ Tube OD (Pack of 30)

  • Sleeve for a tube compression fitting.Connects to copper, brass, aluminum, or plastic tubing..
  • This Metals sleeve compression tube fitting is made of brass, connects to a tube, and is suitable for use with fuel and gas systems..
  • 3000 PSI working pressure, Temperature range of -65°F to 250°F (-53°C to 121°C).
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

ZJERYL GULL TU-114 Auto Fuel Pressure Gauge Tester Kit Gasoline Pressure MetersAutomobile Instrument Testing Tool(Red)

  • 1: Universal design with the accompanying adapter. hoses and adaptationtings cover all fuel injection systems and most cars and vehicles. Not for diesel high pressure injection pumps or direct injection engines.
  • 2: Mechanical ideal: fuel injection pump pressure / fuel injection pressure gauge testing, main sealing performance / accurate reading.
  • Fuel Pressure Tester (0-140 PSI) with good sealing performance and quality materials (metal、rubber、plastic.) provides you with an accurate reading and long lasting product..
  • 3: 114 Fuel Pressure Gauge Tool Kit connection.
  • Connect the pressure gauge directly to the standard schrader / M6 / M8 / M10 / M12 / M14 fuel pressure test port of the fuel pump using special parts and hoses. Insert the "T" part in series between the pump and engine..
  • 4：This fuel injection pump detector is a professional fuel injection system compression detection tool, these readings will help to diagnose the inlet / outlet side components have kink / leak / jam detection or fuel pressure regulator, tank pressure is low. Gasoline is flammable. Make sure there is no open flame nearby and it is operated by a professional..
  • 100% Satisfaction: We are responsible for every product. If you have any problems with our products or services, ple....
Check Stock