ReviewsHigh Pressure Misting System 2

50PCS Brass Misting Nozzles for Outdoor Cooling System 0.012' Orifice (0.3 mm) 10/24 UNC

Operation Pressure:4-70kg/cm (60-995 psi) flow rate:80-145l/min (21-38gpm)..
Save Water: Minimal water use of 1/2 gallon of water per hour per nozzle, which fits for low pressure mister system..
Package Quantity: 50Pack. The orifice of these mister nozzles is 0.012 inch/0.3 mm. Screw into any 10/24-threaded mist nozzle opening..
High Quality & Leak Proof: These misting nozzles made of brass, never rust. Best choice for outdoor use with cold water. Each nozzle is equipped with a leak proof O-ring, so no tape or sealant is required..
Wide Application: The brass misting nozzle is widely applied to outdoor cooling system, agriculture irrigation system, green house, landscaping, small fountain, etc..

Check Stock

Furnrubden Misting Cooling System,Patio Outdoor Fan Mist Syste

Misitng Nozzle System Including - (18.5M) 60.7FT : Including : 11.5Ft (3.5M) Misting Hose Supply +(15M) 49.2Ft misting system Line with 26 Misting nozzle seats.
+1pc Faucet connector +1pc PTFE TAPE+ Instruction.
Usage: Perfect for Greenhouse, landscaping.
humidified courtyard, lawn garden landscape, swimming pool cooling trampoline water park, very suitable for agricultural plants, bonsai and potted fruits or flowers irrigation.
Perfect Product: Enjoy a very good cooling and humid effect and environment, installed in the courtyard, can effectively cool the surrounding temperature, spray a layer of mist, keep people cool. At the same time, it is also the necessary equipment for tourism.
Installation :The system can be DIY, Easy installation, 1/4'' Mist Hose.
maximum working pressure: 30 bar (450 psi).
no power consumption, less water than traditional watering；.

Check Stock

Hourleey Brass Misting Nozzles, 1/4\ Misting System Nozzles for Outdoor, Garden, Yard, Set of 12

Working pressure: 30- 450PSI, cools the surrounding air temperatures up to 20 degrees, Best clogged mister nozzles replacement for DIY homemade low pressure greenhouse, umbrella, patio mister systems, outdoor misting misters cooling system,drip irrigation kit..
These mist nozzle is made from brass material, anti-rust and mist effectively. The holding part 1/4 inch misting tees is made from recyclable plastic material, which is good sealing, no leak, sleek and sturdy..
Slip lock quick pushing, fit for 1/4'' misting systems,great used for water cooling,it can delivers very fine mist to significantly cool the air in the hottest summer weather..
Our misters kits are PRE-ASSEMBLE, and provides all the accessories you need, and the T-connector can be rotated or in the desired direction. You can enjoy the life in the backyard in just a few minutes..
US standard size, can be connected by many kinds tube which is 1/4 inch.These misting nozzle is the necessary accessories to make fan misting system, mist cooling system, plant watering system..

Check Stock

Patio Misting Kit - 250 PSI Patio misting System - Made in USA Pump - Up to 40 Nozzles Misting System - for Residential Misting System - Stainless Steel Misting Nozzles (10 Nozzle System)

{SYSTEM COMPONENTS} Base 10 Nozzle Mist Kit Includes: 1- 250 psi mid pressure pump with built-in solenoid and filtration.
10- cleanable brass/stainless steel Nozzles (0.012").
Mounting Clamps and all necessary fittings required for easy D-I-Y installation.
{MADE IN USA PUMP} Whisper quiet operation Built in Solenoid Valve.
Outdoor Enclosure Wall Mountable Enclosure Max Pump Pressure 250 Psi 110v AC (Available in 12vdc and 220v on request) Supports up to 30 nozzles Cleanable Brass-Stainless Steel ultrafine misting nozzles Reusable push lock fittings.
{APPLICATIONS) Residential Misting, Industrial Cooling, Warehouse Misting, Outdoor Restaurant.
{FITTINGS FEATURES} Fittings are Brass /Nickel Plated Fittings - to Make your Misting System more durable.
{SUPPORT} 24/7 Support from mistcooling Texas. MC12080-MC12092.

Check Stock

Fogland Pump Misting System: Outdoor Misting System 49ft Misting Cooling System with 16pcs 0.016\ Orifice Thread Stainless Steel Misting Nozzle for Patio Garden Backyard

...inless steel misting nozzles, which block impurities in the water and have strong anti-clogging ability. After long-term use, the nozzle can be removed for cleaning. Misting hose is made of UV material, which is not easy to break, prevents water leakage, and is safer to use..
[Wide Use]: Try this multifunctional low-pressure misting system! Misting system offer a wide range of applications for your backyard or patio. Spary on your garden, greenhouse, porch, awning, increase humidity and reduce temperature..

Check Stock

Gesentur Drip Irrigation Kit, 75.46ft (23M) Misting Cooling System, Adjustable Automatic Micro Drip Irrigation System Suit for Garden Landscape, Flower Bed Patio, Greenhouse, Plants

...ing system offers a perfect low-cost solution for your backyard cooling needs. A completely pre-assembled patio kit delivers very fine mist to significantly cool the air in the hottest summer weather. All you need to do is attach it to the water faucet. It is designed and configured to work best with the city water pressure of 40 to 100psi..
★ High Quality: High Quality: Use of precision brass misting nozzle keypunch with sophisticated production, saving more than 10 times cost compared with the humidifier. Made with high quality UV treated flexible tubing, resistant to UV up to 3.5 or more. The built-in stainless steel wafer through advanced forging process, strong durability, is 2.5 times the life of similar nozzle..
★ Upgrade Your Outdoor with the Power of Mist: Gesentur misting cooling system is a great garden irrigation kit. It’s great for flowers, plants, bonsai and potted fruit. For family homes, hotels, clubs, offices and other plants of intelligent care. Swimming pool misting fog cooling, and so on. Please note that each cooling system has added an adapter into the package. Please check whether the size of connnetor or the adapter is suitable for your garden hose before purchase..
★ We Make It Better: Our customer service and technical ....

Check Stock

Orbit 10109W Mist Calcium Inhibitor Filter

【No Leaking Water Mister】 - You must be very annoyed if the misting system leaks. This patio mist cooling system will save you out! Upgraded brass misting nozzles, tightly sealed twist-on connectors and 1/3 inch tube (much wider than the rest of tubes in the market) creates maximum pressure and prevent residual moisture or wetness..
【Save Water and Bills】 - This outdoor misting system offers perfect low-cost solution for your backyard cooling needs. It saves up to 70% water by releasing ultra-fine mist than the traditional spray heads, requires no electricity or pumping but the tap water..
【Effective Misting System】 - The patio misting cooling system produce water mist which absorb the heat from the outdoor surroundings in hot summer and cools the surrounding air temperatures up to 68℉..
【Easy to Use Misting Line】 - This patio misters for cooling is long enough and easy to install. Simplify the insertion and removal of small fittings and drippers. Equipped with a tube cutting tool, you can customize the length according to your needs freely..
【Versatile Watering Line】- With this misting kit you can instantly cool backyard patio, porch, deck, poolside, play area, lawns, garden, greenhouse and anywhere you need some moisture, or ....

Check Stock

32 Pieces Brass Misting Nozzle 0.3 mm/ 0.012 Inch Orifice Replacement Head Low Pressure Atomizing Misting Nozzle and 10-24 Drill and Tap Bit for Outdoor Cooling System Patio Misting System

【PACKAGE】30PCS Brass Stainless Steel Misting Nozzles For Outdoor Cooling System..
【MATERIAL】The misting nozzles are made of brass with stainless steel orifice, anti-rust, durable, leak-proof, the mister nozzle is best choice for outdoor use with cold water..
【TECHNICAL PARAMETERS】High Pressure Outdoor Anti-drip Fogging Spray Head, 0.012" (0.3mm) orifice diameter, 10-70kg working pressure, 60-110ml/min flow rate.It is recommended to increase the use of pumps to achieve a better spray effect..
【EASY TO INSTALL】 The brass misting nozzles are easy to install, which can be easily screw into any 3/16"( UNC 10/24) threaded mist nozzle opening..
【WIDE USAGE】The misting nozzles is widely applied to outdoor cooling system, agriculture irrigation system, green house, spray disinfection, epidemic prevention, deodorizing air purification, landscaping, small fountain, etc..

Check Stock

Brass Misting Nozzle, High Pressure 3/16\ Threaded Outdoor Anti-drip Fogging Spray Head Misting System Nozzle for Landscaping,Air Humidification,Spraying Disinfection - Orifice 0.3mm(10pcs,golden)

...ing system offers a perfect low-cost solution for your backyard cooling needs. A completely pre-assembled patio kit delivers very fine mist to significantly cool the air in the hottest summer weather. All you need to do is attach it to the water faucet. It is designed and configured to work best with the city water pressure of 40 to 100psi..
★ High Quality: High Quality: Use of precision brass misting nozzle keypunch with sophisticated production, saving more than 10 times cost compared with the humidifier. Made with high quality UV treated flexible tubing, resistant to UV up to 3.5 or more. The built-in stainless steel wafer through advanced forging process, strong durability, is 2.5 times the life of similar nozzle..
★ Upgrade Your Outdoor with the Power of Mist: Gesentur misting cooling system is a great garden irrigation kit. It's great for flowers, plants, bonsai and potted fruit. For family homes, hotels, clubs, offices and other plants of intelligent care. Swimming pool misting fog cooling, and so on. Please note that each cooling system has added an adapter into the package. Please check whether the size of connnetor or the adapter is suitable for your garden hose before purchase..
★ We Make It Better: Our customer service and technical su....

Check Stock

homeyeco Misting System, 3-Way Fine-Mist Leak-Proof Hose Mister, Versatile Patio Mister for Cooling Outdoor, Cobra Mist Stand, Misters for Outside Patio Greenhouse Chicken Coop Dog Pool Trampoline

...cooling system remains in top condition (Regular cleaning is recommended for optimal performance)..
Durable Construction - Our outdoor misting system is made with high-quality materials that are designed to withstand wear and tear. The aluminum tube and connectors are high-pressure and high-temperature resistant, while the heat shrink coating provides additional protection. The standard connectors ensure a leak-proof seal..
Simple Setup - Connecting our portable plant mister to your garden hose is quick and easy thanks to the standard 3/4" garden hose connector. Once connected, turn on the faucet and start misting..

Check Stock

mistcooling High Pressure Misting System 1500 PSI - Flexible (60 Feet - 20 Nozzles)

Features: Base 20 Nozzle Kit Contains: - 1 - Max1500 psi High pressure pump with built-in water on/off valve, low water cut off switch, pressure bypass, commercial 5-micron filtration, Outdoor Rust Proof Enclosure with on/off Switch.
- 60ft 1/4" Nylon Tubing-Black - 20 - HP Push Lock Misting Tees.
- 20- Stainless Steel Orifice Nozzles (0.006") - 1 - Push Lock End Plug - 2- Nozzle plugs - 2- Replacement Nozzles - 1- Drain Valve Assembly - Stainless Steel Mounting Clamps.
Specs:1500 PSI Misting Pump: 0.15 & 0.30 GPM - For up to 40 Misting Nozzles - Pressure Adjustment Valve to allow increase or decrease of the outlet water pressure. - Pump pre-set for ideal working - Solenoid Valve – controls flow of water in the misting pump - Pressure Switch or no cut off water switch will turn pump off, if no water supply - Thermal Safety Swithc - Maximum Speed 1800 rpm - Full load Amps. (0.15/ 0.30 gpm.) 1.38/ 2.00 Amps - Noise level: 75 DB - Maximum Inlet Pressure–100psi.
Filter: - 5 Micron Filter - Filter in the package comes with 3/8 inch inlet- outlet fitting. - Standard pump comes with ¼ inch push lock type fitting.
However, it is placed on 3/8 inch male and ¼ inch female adapter. - Outlet comes with ¼ inch fitting as standard.

Check Stock