ReviewsHigh Pressure Quick Disconnect

POHIR Pressure Washer Whip Hose 5 FT, Hose Reel Connector Hose for Pressure Washing, Short Power Washer Hose with 3/8'' Quick Connect Adapter Set, High Tensile Wire Braid Pressure Hose 4200 PSI (5)

【Short Power Washer Hose】 - Jumper whip hose 5 Feet, is more flexible and bends more easily, kink resistant and easy to roll up. Commonly used as an extension that is near the machine and sprayer..
【High Pressure Washer Hose】 - MAX working pressure of this whip hose is up to 4200 PSI. Burst pressure reach 16000 PSI. Max working temperature is 140℉ / 60℃. Flow rate is 2.5 GPM to 5 GPM..
【Heavy Duty Pressure Washer Hose】- Pressure hose braided with a reinforcement construction composed of high tensile wire, scuff and mark resistant construction for prolonged service life..
【Quick Connect Pressure Washer Hose】- Pressure washer hose has quick connector on both ends - 3/8” quick connect plug & 3/8” quick disconnect fittings. These quick connection accessories can easily hook up to pressure washer and the sprayer..
【Power Washing Hose】 - POHIR pressure washer hoses vary in length to accommodate all cleaning projects. This 5 FT pressure whip hose is designed for short runs of high pressure. Welcome to POHIR to see other pressure washer attachments & accessories, we are expect in pressure cleaning..

Check Stock

Twinkle Star 4000 PSI High Pressure Power Washer Gun, 21 Inch Replacement Wand, 5 Spray Nozzles Tips, 3/8" Quick Disconnect Plug, TWS139

4000 PSI high pressure washer gun body, M22-14 metric thread inlet fitting, be used to connect standard pressure washer hose. The gun has a safety locking trigger to prevent accidental sprays. The high pressure water generated increases the cleaning efficiency for better performance and less time spent on cleaning..
21 inch replacement wand with 1/4 inch quick connect outlet fitting, fits pressure washers, easy lock with pressure washers. 21″ long, you can now get to all those hard to reach places..
5 nozzle tips kit with 0°, 15°, 25°, 40°, & Soap-degree spray patterns for a variety of uses, like washing car, washing fence, cleaning sidewalk. 1/4 inch quick connection design, easy to connect to the replacement wand..
3/8″ Quick Disconnect Plug provides secure and quick fittings, for use on gun, hose, pump to converts the M22 thread-on couplings to a 3/8” quick connector..
Includes 4000 PSI high pressure water gun, 21 inch replacement wand, 5 spray nozzles tips and M22-14 swivel+3/8”plug, requires pressure washer to have 2.0GPM & over 1000 PSI pressure for use. 100% SATISFACTION GUARANTEED! If you have any problems, please feel free to contact us..

Check Stock

13 Pieces Airbrush Adapter Set, Including Airbrush Adapter Kit Airbrush Quick Release Disconnect Fitting Connector Set for Air Compressor and Airbrush Hose

Product information: you will get 7 pieces different types of 1/8 inch and 1/4 inch male and female connectors, 1 piece quick disconnect connector (adjustable pressure), 5 pieces 1/8 male connectors in our package, a nice combination for you to use.
Durable material: these airbrush adapter kits are made of quality metal material, and the sturdy structure makes them difficult to break or deform, durable and rust-proof, and can be applied for a long time.
Install simply: no need to fix with screws, and the spray gun accessories are equipped with threads, you can easily connect and disconnect, without releasing the air pressure, saving you much time and energy.
Compatibility: our spray gun quick disconnect device is compatible with most Master, Pointzero, Iwata, Hansa, Sparmax, Grex spray guns and most Chinese spray guns.
Exquisite design: the adapter accessory is a nice spray gun connector, which is applied to connect the air hose to the spray gun.
When you use multiple spray guns, there is no need to release the air pressure, so that the spray gun could be quickly replaced.

Check Stock

POHIR Pressure Washer Hose 150 FT with 3/8 Quick Connect High Tensile Wire Braided Power Washer Hose with 2 Quick Connect Kits Compatible M22 14mm Hose for Pressure Washer 4200 PSI

【Pressure Washer Hose150 FT】- The pressure washer hose 150 feet is high tensile wire braided, it's durable and able to support quite high working....
【Pressure Washer Hose 4200 psi】- MAX working pressure of this high pressure washer hose can reach 4200 PSI. The burst pressure is up to 16000 PSI.....
【3/8 Quick Connect Pressure Washer Hose】The pressure hose is equipped with 3/8" quick connector which is not only easy to connect & disconnect,....
【Kink Resistant Pressure Washer Hose】- The combination of high-quality materials and high-tech craftsmanship brings excellent kink resistance.....
【Package Include】- 1 * steel wire braided 150 foot pressure washer hose, 1 * M22 14mm female & 3/8 inch male plug , 1* M22 14mm female & 3/8 inch....

Check Stock

Twinkle Star Pressure Washer Adapter Set, Quick Disconnect Kit, M22 Swivel to 3/8'' Quick Connect, 3/4\ to Quick Release

Package Includes: 2 pack M22-14 swivel + 3/8" plug, 2 pack 3/8" QD + M22-14 male, 2 pack 3/4" female + 1/2" quick connect, 2 pack 1/2" plug+ 3/4" male..
Attention: M22-14 SWIVEL SELL IS 14mm FITTING. INSIDE DIAMETER IS 14mm, NOT 15mm. If your fitting is 15mm, it may cause leakage. SO NOT FIT some electric pressure washer with M22 15mm fitting..
Easy Connect & Disconnect: Two sets of quick connectors connect the pump outlet to the pressure washer hose or the pressure cleaning hose to the gun. The other two quick connection kits convert 3/4" threads into quick release connectors and connect all 3/4"standard garden hoses to the inlet of the electric washer pump..
High Working Pressure: Working Pressure is up to 5,000 PSI. Made of corrosion resistant brass..

Check Stock

TMCRAFT 1.6 Gallon Mini Ball Lock Keg, Stainless Steel Double Ball Lock Post Corny Keg with Quick Disconnect Set for Home-brewing

STAINLESS STEEL: This corny keg is constructed with food grade stainless steel which keeps beer fresh for few months, and the high-strength stainless steel can withstand higher co2 pressure..
PORTABLE: 1.6 Gallon capacity can be stored and taken anywhere. Measures 8.9"L x 8.9"W x 11.1"H. Dual metal handle contribute to carry. Also easily stackable once disconnects have been attached..
BALL LOCK SYSTEM: Double ball lock post design allows this corny keg to connect ball lock quick disconnect set, allows easily carbonate home-brew and more options of extra functions for your kegging system (2 quick ball lock disconnect set included)..
RELIEF VALVE: Ball lock mini keg equipped with relief valve allows you to control the pressure in the keg through pulling on the pressure-relieving ring for a couple seconds..
ONE YEAR WARRANTY: Message us 24/7 via Amazon for full support and service if you are not fully satisfied with our mini keg or it does not perform to your expectations..

Check Stock

Lisle 39210 Main Fuel Line Disconnect

GET THE JOB DONE: The ABN | Master Deluxe AC Line Disconnect Tool Fuel Disconnect Tool Set offers a wide range of tool sizes to separate quick disconnect fittings on oil/fuel lines, heater lines, and AC cooling lines.
FITS YOUR VEHICLE: Fuel line and AC tools for automotive applications are compatible with several Ford, GM, Mazda, and other vehicles with automatic transmission lines.
Measure your application to ensure correct fitment.
EASY TO USE: Each fuel tool is color-coded by size for easy identification.
Simple one-handed operation with easy-grasp end and unique offset design to access hard-to-reach confined or obstructed areas.
Release the fuel line locking mechanism by listening for the slight “click” that means that it has done its job for easily removal.
BUILT TO LAST: Each fuel line quick disconnect heater hose disconnect tool is constructed from hard plastic for strength and longevity that resists rust and corrosion.
Spring-loaded fuel line tools design allows to easy opening and spring closing when pressure is released.
PACKAGE CONTENTS: Package contains (6) fuel line pliers transmission tools – Red 5/16-inch (8mm), gold 3/8-inch (9.5mm), dark gray 1/2-inch (13mm), blue 5/8-inch (16mm), black 3/4-inch (19mm), silver 7/8-inch (22mm).

Check Stock

POHIR Pressure Washer Whip Hose 3/8”, 248℉ Hot Water Pressure Washer Hose 4800 psi, High Pressure Jumper Hose 3FT for Power Washing, 3/8' Short Hose Reel Connector with Removable 3/8 Quick Connect

【Pressure Washer Jumper Hose 3/8】 - 3/8" pressure washer whip hose is 3 FT X 3/8 Inch. Rated 4800 PSI working pressure. Burst pressure reachs 16000 PSI. Short Power Washer Hose is more flexible and bends more easily, kink resistant and easy to roll up..
【Hot Water Pressure Washer Hose】 - 3/8’’ pressure washer jumper whip hose is designed for hot and cold water of pressure washers. Max temperature for hot water is up to 120℃ /248℉. The 3/8 power washer hose works great on all seasons..
【Quick Connect Pressure Washer Hose】- Pressure hose has quick connector on both ends - 3/8” QC plug & 3/8” quick disconnect, help easily hook up to pressure washer and sprayer in case a quick connect is needed. Also the quick connectors can be removed, leaving a threaded end for hose reel..
【Short Connector Hose 3FT】- Commonly used for a high-performance connection of power washer pump to hose reel which is near the machine. Also an ideal connector hose for carwash self-service equipment..
【Heavy Duty Pressure Washer Hose】- High tensile steel wire braided 3/8” power washing hose, scuff and mark resistant construction for prolonged service life..

Check Stock

TMCRAFT 2.6 Gallon Mini Ball Lock Keg, Stainless Steel Double Ball Lock Post Corny Keg with Quick Disconnect Set for Home-brewing(10L)

STAINLESS STEEL: This corny keg is constructed with food grade stainless steel which keeps beer fresh for few months, and the high-strength stainless steel can withstand higher co2 pressure..
PORTABLE: 2.6 Gallon capacity can be stored and taken anywhere. Measures 8.9″L x 8.9″W x 14.6″H. Dual metal handle contribute to carry. Also easily stackable once disconnects have been attached..
BALL LOCK SYSTEM: Double ball lock post design allows this corny keg to connect ball lock quick disconnect set, allows easily carbonate home-brew and more options of extra functions for your kegging system (2 quick ball lock disconnect set included)..
RELIEF VALVE: Ball lock mini keg equipped with relief valve allows you to control the pressure in the keg through pulling on the pressure-relieving ring for a couple seconds..
ONE YEAR WARRANTY: Message us 24/7 via Amazon for full support and service if you are not fully satisfied with our mini keg or it does not perform to your expectations..

Check Stock

OTC 6080 Fuel Injection Test Kit for Master Cummins Diesel Engine

Includes the fittings and gauge needed to check fuel pressure fuel volume and fuel restrictions from the delivery pump to the injection pump.
Kit includes special quick-disconnect banjo fitting two fuel injection quick-coupler adapters quick-disconnect banjo fitting gauge assembly and fuel volume test adapter.
Also includes a diesel fuel inlet restriction test adapter for 1988-98 Dodge pickups and vans with 5.9L 12-valve and 1998-1/2-newer 5.9L 24-valve Cummins diesel engines.

Check Stock

RIDGE WASHER Compatible Pressure Washer Spray Wand, Replacement for Ryobi, Powerclean, Power Stroke, Stainless Steel, 15 Inch

Pressure washer spray wand is an adapter for Ryobi, Bosch(not AQT), Powerclean, Power Stroke, Harbor Freight, Rural King, Powerwasher, Plusar, Portland, Craftsman..
Pressure washer wand also can be used to a replacement for Ryobi 308494075. The lenth is 15 inch..
Power washer wand is made of high quality brass and stainless steel. Max working pressure is 4000 PSI..
It has 1/4’’ quick disconnect socket. Attach it to pressure washer nozzle tips or foam cannon with 1/4” plug..
If you have questions, contact us at any time. We provide a service of quick reply within 10 hours. Welcome to RIDGE WASHER to see other pressure washer accessories..

Check Stock