ReviewsHigh Production Efficiency

Latch Hook Kits Safety Certification Carpet Tufting Machine, DIY Carpet Rug Weaving Machine Flocking Knitting Machine, 7-22mm Adjustable Height. Industrial Embroidery Machine Hand-Held Electric Punch

...It can be used for weaving different types of carpets. The motor speed can reach 2400RPM or higher for high-speed tufting, which improves work efficiency..
【Meet various needs】 The speed of this Tufting Gun studio can reach 5-40 stitches per second, and the adjustable carpet height is 7-21mm, which increases the production efficiency by 80-100 times and saves more than manual knitting and time..
【Simple operation】The tufting gun kit Contains 16 different-shaped carpet anti-skid stickers, so that you will not slip when using a new carpet, which is safer. Easy to operate and master, not only suitable for high-speed knitting and flexible movement, but also suitable for mobile tabletop work.
【Safety protection】The tufting gun has over-voltage, over-current, and short-circuits protection functions, which can avoid accidents during use. At the same time, it is quieter and will not make a loud noise and almost all yarns are available, it is advanced special equipment that can greatly improve work efficiency in modern production..
【Lightweight and portable】The tufted carpet gun is a portable electric knitting tool. The product is only 1.4kg. You can easily lift it for operation. After use, it can also be stored in a cabinet or trunk without takin....

Check Stock

4.5 Qts Wax Melter for Candle Making Candle, Wax Melting Pot, Large Commercial Candle Maker Machine with Pour Spout and Temperature Control for Business Home

... strong seal to prevent wax overflow. You will get a wax melter, 500 Candle Warning Labels, 100 Wicks, 100 Glue Dot, 1 Cup, 1 Brush..
【Wax Melter with Spout】The heating efficiency of the wax melting furnace is very fast, which can greatly save your time and improve the production efficiency. This wax warmer comes with a pour spout, makes pouring wax into the candle mold easier and also decreasing likelihood to spill resulting burning..
【Great Candle Making Supplies】Quick and convenient temperature control function, can control the temperature 30℃-110℃, to meet the production needs of different waxes. It can melt 15 pounds of soy wax at a time, which greatly shortens the production time for you and makes it easy to produce candles in batches..
【High Quality Material】Made of stainless steel inner tank, high-temperature resistance for easy wax release, which is easy to clean. Suitable for soy wax, paraffin, coconut & beeswax and more..
【Easy and Safe to Use Tips】Setting the temperature you need,and the machine will heat to the temperature and when center temper....

Check Stock

INTBUYING Commercial Vegetable Fruit Chopper Slicer Dicer Machine Automatic Vegetable Cutter 1-25mm Thickness Stainless Steel Chopping Shredding Machine 110V

... into small pieces or finely chopped.This equipment is simple to operate and easy to maintain. It is a necessary for processing for commercial kitchens and restaurants..
【High Efficiency】The manufacturing of this machine completely replaces the time-consuming and laborious manual cutting of vegetables and fruits.Production capacity is 287lbs/h-1455lbs/h(130kg/h-660kg/h),Vertical knife cutting speed is 151times/min-283times/min,Dicing specifications is 0.79"x0.79".Vertical knife cutting range:0.04"-0.98",can improve the efficiency of cutting greatly..
【Great Effect】Equipped with 4 cutting knives,it can cut shreds, diced,wavy,and rhombus with rich functions.Using the vegetable cutter to cut out the thickness is more uniform,and the thickness can be adjusted.2H(1500W) full copper motor, which is more powerful power and designed for continuous production process, with higher efficiency..
【High Quality Material】The entire body shell material is made of food-grade thickened 304 stainless steel, which is much more durable,also easy to clean.Food grade transmission belt, made of natural rubber, environmental protection, more wear-resistant, cut out more healthy and safe vegetables..
【Easy to USE】Each machine comes with an instruction manual make....

Check Stock

Stroboscope, Stroboscope Tachometer Non Contact for Industrial Maintenance

[Durable Material] The stroboscope is made of high quality ABS material, which is durable, stable in performance, and can be used for a long time..
[LCD Display] With large LCD backlit display, which is easy to read data in the dark, and the measurement result is accurate, to meet your various need..
[High Efficiency] Stroboscope adopts digital control to adjust the flash frequency, low power consumption, with speed storage, and improves the measurement efficiency..
[Anti Interference] Adopt photoelectric technology, anti interference, realize non contact measurement, detect the state of moving objects and surfaces defects..
[Compact And Portable] Non contact stroboscope tachometer is compact, easy to carry and store, widely used in industrial maintenance, production, laboratory, etc..

Check Stock

Carpet Weave Gun Ring Stack Manual Carpet Electric Loom Electric Carpet Tufting Gun Carpet Cutter Flock Machine, Industrial Embroidery Machine, Cutter (Blue Ring)

✅ [High Efficiency]--2400rpm,its production efficiency is 80-100 times of manual production,about 5-40 stitches per second.It has the characteristics of high-speed woven and flexible movement.Save your time..
Output DC:24V Small adapter. The machine weighs only 1400g.Has over voltage, over-current and short circuit protection..
✅ [Pile’s Height is adjustable]--Pile height adjustable from 4-14mm(Loop Pile)..
✅ [Note]-- Do not operate the machine when the power is on but the machine is turned off, because there is still power on the circuit board at this time. Pressing the red pin button will cause the capacitor of the circuit board to be destroyed..
✅ [Widely Application]--It is easy to operate, easy to master, long life, less trouble.The machine is portable ,it also produced a huge change in the traditional hand-made carpet,can weave many types of fancy,at the same time more efficient.It suits for you DIY carpet,also suit for carpet industrial..

Check Stock

Desktop Computer Motherboard DDR3 Computer Mainboard Support Rich Extension Interface Low Power Consumption Fit for Bitcoin Mining Machine

[Good Performance] The computer motherboard has low temperature , high efficiency , multiphase and stability..
[Heat Dissipation] Adopts sophisticated production technology , has good heat dissipation and high work efficiency..
[DDR3 Memory] Made of high quality materials , this computer motherboard has a long service life and is DDR3 memory..
[Rich Extension Interface] With rich expansion interfaces , can support all kinds of mainstream expansion devices..
[Good Compatibility] Has good compatibility, this computer motherboard is suitable for bitcoin mining machine..

Check Stock

Air Release Valve Water Irrigation Automatic Micro Agriculture Tool Accessories Grounds Management POM

Engineering Plastics Material:Made of high quality engineering plastics, durable, corrosion resistant and anti-aging..
Automatically:Used for automatically exhaust and intake air, it can also auto turn off..
Energy Saving:Protect and improve system of water delivery efficiency and saving energy..
Objects Used:It is mainly installed on the highest position and local highland in micro injection system..
Widely Used:Widely used in public green space, home gardening, agricultural production, garden gardening production..

Check Stock

Stroboscope Tachometer, Anti Interference Stroboscope LCD for Industrial Maintenance

[Durable Material] The stroboscope is made of high quality ABS material, which is durable, stable in performance, and can be used for a long time..
[LCD Display] With large LCD backlit display, which is easy to read data in the dark, and the measurement result is accurate, to meet your various need..
[High Efficiency] Stroboscope adopts digital control to adjust the flash frequency, low power consumption, with speed storage, and improves the measurement efficiency..
[Anti Interference] Adopt photoelectric technology, anti interference, realize non contact measurement, detect the state of moving objects and surfaces defects..
[Compact And Portable] Non contact stroboscope tachometer is compact, easy to carry and store, widely used in industrial maintenance, production, laboratory, etc..

Check Stock

10 pcs 4-Flute End Mill Bits, AFUNTA 0.08\ - 0.47\ HSS CNC Straight Shank Drill Bits Cutter Tool Set for Wood Aluminum Steel Titanium

APPLICATION: Suitable for side milling, end milling, finish machining in carbon steel, alloy steel, die steel, tool steel, cast iron, and titanium..
HIGH PROCESSING EFFICIENCY: the edge of end mill bits is HARD and SHARP with TIAIN coating, process the heat treatment materials with high speed, reduce changing times and improve the production efficiency..
U-SHAPED GROOVE DESIGN, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
MATERIAL: high speed steel, high hardness, good wear resistance and durability..
10 DIFFERENT KINDS OF SIZE end mills to meet your need, 2mm/0.08in,3mm/0.12in, 4mm/0.16in, 5mm/0.2in, 6mm/0.24in,7mm/0.27in, 8mm/0.31in, 9mm/0.35in,10mm/0.39in, 12mm/0.47in.

Check Stock

Scicalife 20pcs Cone Shape Sandpaper Deburring Sanding Polishing Abrasive Flap Wheel Sander Grinding Head for Grinding Rotary Tool

-Adopt precision production to enhance stable characteristics and high reliability..
-Application: Very suitable for polishing, grinding or forming of metal and non-metal materials. It has the functions of repairing welds, deburring and derusting complex surfaces..
-Durable: sharp grinding and strong grinding force, it is durable and high production efficiency..
-Used with straight grinders, hand drills, pneumatic tools, electric drills, pneumatic drills, bench drills, etc..
-Suitable for deep hole polishing and finishing of complex surfaces of wood, plastic, metal and non-metal..

Check Stock

Cylinder Pneumatic Clamp Air Clamp Hold Down Clamp with U-Bar, GH-12130 Air Toggle Clamp

METAL MATERIAL: This pneumatic clamp is made of high-strength metal material, which is anti-oxidation, wear-resistant, strong and reliable.
STABLE OPERATION: Built-in air flow control provides smoother operation during repetitive clamping operations than manual clamps.
HIGH EFFICIENCY: The pneumatic clamp can shorten test time,and improve production efficiency which reduce labor intensity of workers.
WITH U-BAR: Holding screw moves on the U-shaped hold-down bar for larger clearance angle.
WIDELY APPLICATION: The pneumatic clamp can be used in welding, fixture, mold and other positions.

Check Stock