ReviewsHigh Speed Machining

10Pcs Center Drill Bit Set High Speed Steel 4341 Straight Shank Center Drill Bit Combo Drilling Tools 2.5mm for Hole Processing

★High Precise Positioning: This high speed steel center drill bits is mainly used for the prefabricated precise positioning of hole machining, guiding twist drills for hole machining, thereby effectively reducing errors.
★Used for: Use a center drill to make a conical hole for the center of the lathe as a starting point for a standard twist drill. Can be used as a starting hole to prevent the drill bit from deviating from the original route. Used for center cages that need to be processed between parts or workpieces.
★High Performance: This center drill bit is made of high‑quality high-speed steel material, with high hardness and good wear resistance, strong and durable, has a long service life. With good applicability, stability, high processing efficiency, long life expectancy, etc..
★Widely Used: This center countersink drill bit are good for most general purpose applications, which can not only be used on a lathe, but also can be installed at the end of the workpiece in the center of the lathe.
★Note: Please allow slight error due to manual measurement. Thanks for your understanding.Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.

Check Stock

Rannb End Mill Cutter 1/16\ Cutting Dia 1/4\ Shank Dia 4 Flutes End Mill Drill Bit - 5pcs

⭐【Material】The end mills are made of High Speed Steel,high hardness,good wear resistance and durability..
⭐【Pack of 5pcs】Sold in pack of 5pcs of end mill cutters..
⭐【Good Design】 Large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
⭐【Applicable Material】Suitable for side milling, end milling, finish machining in carbon steel, alloy steel, die steel, tool steel, cast iron, and titanium.And Circuit boards,Metal,Majority of plastics, Wood, Fibre glass, Carbon and environmental board..
⭐【Heat Treatment Process】The High Hardness Steel go through the heat treatment process so the end mill is more durable. Reduce changing times and improve the production efficiency..

Check Stock

Valianto 1/8\ (3mm) Air Micro Grinder, Pneumatic Pencil Die Grinder, 58000 RPM Free Speed

【Specification】-----1/8" Collet-----1/4" Air Inlet-----2 CFM Avg. Air Consumption.
【Working】-----58000 RPM Free Speed-----90PSI Air Pressure-----High-speed pencil type grinder, can adapt to high speed precision machining Sophisticated interior design, easy use and durable..
【Speed Control】-----Pencil Type Micro Air Die Grinder features a variable speed throttle control..
【Hose Protector】-----Convenient hose with hose protector. Rear exhaust to prevent the chip flying anti-chip scattering and reduce noise..
【Occasion】-----All kinds of metal precision grinding,Cutting plastic, stone, wood, etc., grinding, polishing, Clean jewelry, dies, rotors, backing plates, brake pads, cylinder heads, mounts and many other applications.

Check Stock

AUTOTOOLHOME 1/8\ 3/16\ 1/4\ 5/16\ 3/8\ 1/2\ high Speed Steel HSS 4 Flute Straight End Mill Cutter 5/32\ 1/16\ Set of 8

Cutting Diameter : 1/8" 3/16" 1/4" 5/16" 3/8" 1/2" 5/32" 1/16".
Suit for: Hardness of metal for above 30 degrees,with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications..
End mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, soft alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
The bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..

Check Stock

YCHUAN 1PC 2/4Flutes R2-R30 Cemented Carbide Corner Rounding End Mills,Ball Nosed Concave Radius Milling Cutters (R2/R5/R8/R15/R25/R30) (Size : R20(2 Blades))

Fully ground spiral groove design clears particles quickly, decreases friction and heat for a faster and cooler drilling performance..
Industrial quality, much better than those material with HSS(high speed steel)..
high machining precision and surface roughness of machined workpiece, and convenient assembly and disassembly, high production efficiency..
It's characteristics:high machining precision and surface roughness of machined workpiece, and convenient assembly and disassembly, high production efficiency..

Check Stock

THK Cross Roller Guide V6-600 VR6-600×41Z 6600T

There are 10pcs of this center drill bit, which is convenient and practical for user, easy to use..
This centering drill bit is made of high‑speed steel with high hardness and hardness..
The center drill is suitable for bench drills, milling machines, and machining centers..
The 3mm center drill is incisive, wear‑resistant, heat‑resistant, and has a long service life..
Adopt enlarged chip flute design is conducive to high‑speed operation and accelerate chip removal..

Check Stock

YOYO TOOLS, Carbide Square Nose End Mill Set- Metric Carbide End Mill CNC Milling Cutter Tungsten 4 Fultes by YOYOTOOLS (D8+D10 End Mill)

8mm and 10mm End Mill Set, Material : Tungsten Carbide.
End Mill Cutting Diameter : 8mm , 10mm, HRC55 degrees.
Suit for: with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications..
End mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, soft alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
The bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..

Check Stock

MAACFLOW - Stainless Steel Barb/Barbed Hose Fitting 5/8 Hose ID Barb x 1/4 Male NPT Adaptor/Coupler/Connector Pack of 2

Passivation process to increase the level of protection against rust and corrosion on the material, thus greatly improve product's durability and lifespan.
High-speed machining process improves the machining accuracy and the machined part’s surface, to achieve good surface finishing.
Design for thicker wall, longer on thread and barb, to increase fitting's durability and relliability.
100% NPT gage inspection to ensure thread conformity.
Clamshell packing to protect fitting and thread being damage during transit.

Check Stock

SpeTool 12501 2 Flutes Carbide CNC End Mill For Aluminum (1/4 Shank, 2.5 inch Long) Router Bit Spiral Mill

Solid Carbide Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 3/4 inch Cutting Length, 2-1/2 inch for Total Length.
The EndMill With Flat Top, 2-Flutes, Large Chip Pocket, Easy Chip Removal..
For Aluminum, Non-ferrous Metal, Plastics, Plywood, OAK, MDF, and Any Hardwood Working and Long service life for sharp.
The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
End Mill Bits are Suitable for Slot Machining, Side Face Machining, Hole Machining. Please Adjust the Speed, Feed and Cutting Depth According to Actual Cutting Conditions..

Check Stock

OREI eARC 4K 60Hz Audio Extractor Converter 18G HDMI 2.0 ARC Support - HDCP 2.2 - Dolby Digital/DTS Passthrough CEC, HDR, Dolby Vision HDR10 Support (HDA-927)

Cutting Diameter : 1/8" 3/16" 1/4" 5/16" 3/8" 1/2" 5/32" 1/16".
Suit for: Hardness of metal for above 30 degrees,with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications..
End mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, soft alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
The bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..

Check Stock

Flap Disc grinding wheel sanding discs 25 Pack 4.0

25 pieces T27 aluminum wheel with high lead oxide alumina, 4.0 inch x 5 / 8 inch, 25 pieces of 60 grain size. It can be used for edge machining and profile application, providing a grinding angle of 10-15 degrees, can be used for edge machining or profiling application, and can effectively absorb vibration without generating stains, thus bringing more stable and effective..
High-Performance Bevel T27 Wheel high-density and high-quality zirconia is produced to make it compatible for grinding, with the maximum speed of 13, 000 RPM..
Safety made of alumina abrasives and zirconia alumina materials, it has longer service life than the standard alumina abrasives. It has a good heat dissipation, low noise, higher toughness and abrasive resistance, and it is specially designed for stronger and more economical grinding wheels..
Application Rust protection, Paint, nonferrous metals, chamfer, mixing by welding, stainless steel and nonferrous metals, cleaning and finishing, polishing, wood and plastic, the perfect products can meet your needs..
Thanks for buying]if you have any questions about our products, please send us email. We are 100 percent to help you with your purchase. If you have any questions, please feel free to contact us..

Check Stock