ReviewsHigh Speed Spindle Lubricating

Carpet Trimmer Low Noise Rug Carver Electric Speed Adjustable Rug Tufting Carver Clippers Electric Clippers Carpet Carving Tool for Handmade Rug Clean and Tufted Carpet Rug, 200w

  • Nice Performance: the grooming clippers are made of wood and metal, the handles make them more comfortable, not easy to deform or break, easy to use and can make your handmade rug cleaner, so you will have a nice tufting experience.
  • Adjustable Speeds: the speed of tufted carpet electric trimmer is adjustable, so you can use the adjustable knob on power adapter to adjust easily, there are 6 different speeds offered that from low speed to high speed, more choices for a suitable speed.
  • Considerate Combinations: we will extra provide 2 pieces of limit combs that each have two different size namely about 3 mm, 6 mm,9 mm and 12 mm, easy to install and replace to suit different condition, besides we will provide a cleaning brush to make your rug carver clippers clean.
  • Wide Range of Use: the tufted rug trimmer electric can not only be applied to trim the carpet, but also can trim your pet hair, with the adjustable speed, you can use them with confidence, but please still be careful.
  • Please Note: before you use the tufting rug electric trimmer, please add the lubricating oil on electric push scissors, or it may heat because of the friction, lubricating oil is not included, please clean it and add the lubricating oil after you use it.
Check Stock

ZERAY Mountain Bike Pedals Sealed Clipless 9/16\ Crank Compatible with Shimano SPD Cleats (Cleats Included)-Dual Platform Multi-Great for Road,Trekking,Touring,City Bike

  • Lightweight and strong: [body] These SPD bike pedals ADC6 die-cast aluminum-magnesium alloy are lighter and stronger. It can avoid the damage of the pedal caused by a crash. [spindle] chrome steel lightweight.Not recommended for installation on indoor bikes and spin bikes..
  • Clips and Cleats: ZP-109S is designed with a clip compatible with SPD cleats on one side. The other side is the flat. The tension can be adjusted. The cleats have a floating degree of 6°. Esay cilp in and clip out.ZERAYType (SC-03),compatible shimano spd SM-SH51 cleats..
  • Spindle and Sealed Mechanism: These bike pedals are suitable for 9/16-inch bike crank，Self-lubricating bearings, maintenance-free.The bike pedals are designed with sealed mechanism. It can effectively prevent dust and rain from entering the spindle..
  • Type of pedal installation wrench: Hex Key Wrench 8mm..
  • What's in the package：1 pair of pedal，1 pair of cleat,4 reflectors，4 screws and 2 washers.
Check Stock

Grizzly Industrial G0733-18 x 47 Heavy-Duty Wood Lathe

  • Electronic variable-speed spindle control.
  • Headstock can be positioned anywhere along the bed.
  • Heavy-duty cast iron bed and legs ensure stability and minimal vibration.
Check Stock

AMX ap-25 Plateau Tournant Préampli Audio Pour raccordement

  • STABILIZING ROTATIONAL SPEED: This is a great record stabilizer for LP record player, which will efficiently keep the disc from shaking and reducing vibration with stabilizing rotational speed. It is good for eliminating vibration, stabilizing rotational speed, and maintaining horizontal level of LP Turntable..
  • PURE AND EXCELLENT MUSIC ENJOYMENT: This record weight stabilizer realistic sound reproduction and lower noise, perfect for maintaining stability, and improving acoustic quality. provide you a pure and excellent enjoyment in music..
  • COMPATIBLE WITH MOST LP TURNTABLES: The spindle hole of this LP vinyl turntable metal disc stabilizer is suitable for a spindle diameter of up to 7mm, and it works well with most existing LP turntables and has a superior effect..
  • HIGH QUALITY ALUMINUM ALLOY: This aluminum turntable clamp is made of high quality aluminum alloy, with a bright and beautiful surface, and is durable. Match with your record to improve your quality of life..
  • BUILT IN HIGH PRECISION BUBBLE LEVEL: This vinyl record vibration reducer has built in high precision bubble level, show you the rotation speed of the LP disc. It can maximize the high quality sound of the record..
Check Stock

AIHANCH Bike Pedals Road Bike Pedals Lightweight Bicycle Platform Pedals Carbon Cycling Road Bike Pedals with Bike Cleats for Shimano SPD-SL System

  • Material of Bike Pedal: [body] aluminum alloy, [spindle] chromium-molybdenum steel, anti-rust and high strength. Each pedal is around 150g/5.3oz ultralight..
  • Road Bike Cleats: Bicycle cleats Perfectly compatible with Shimano SPD-SL pedals and shoes, 6 degree float allows riders to have some lateral movement on the bike and help you reduce the pain and fatigue..
  • Spindle Diameter: Standard 9/16-inch sturdy Chromoly steel axle bearing fits for most bikes. Self-lubricating bearings, maintenance-free..
  • Easy to Install: The cycling pedals are divided into left and right pedal. With threaded ring is for left, without threaded ring is for right. Turn the left pedal counterclockwise and turn the right one clockwise for installing..
  • Adjustable Tension Setting: Use 2.5mm allen key to rotate the adjustment knob, "-" means loosen the tension, "+” means tighten the tension. (If it is hard to slide out of the pedals, apply a bit of lubricant on the edge of the cleat and adjust to the minimum tension).
Check Stock

2.2KW 3HP Spindle Motor and VFD Set Air Cooled Er20 CNC Spindle with Matching Variable Frequency Drive Inverter 220V

  • 2.2kw Air -cooled Motor Spindle and Matching Inverter.
  • 2200kw Air -cooling High Speed High Precision Spindle.
  • RS485 communication port,adopting standard international MODBUS main circuit control 1.5KW 2HP VFD.
Check Stock

CNCEST CNC 3040T 4 Axis Router Engraver Engraving Drilling Milling Machine Desktop & Power Metal Wood Carving Cutter Acrylic Diy Artwork(USB Interface Is Not Supported, Cannot Use Converter)

  • ☀ The spindle head adopts the labyrinth waterproof structure design, which effectively avoids the cutting fluid and dust entering the spindle during the production process, ensuring the service life and accuracy of the spindle head..
  • ☀ The main shaft box is made of high-tough cast iron. It is treated by artificial and natural double aging, wear-resistant and not easy to deform..
  • ☀ The main shaft is made of 40Cr high-quality alloy steel..
  • ☀ The bearing is assembled with the deep groove ball bearings produced by Luoyan Technology in the first 3 and the rear 2, and is lubricated with high-speed bearing grease..
  • ☀ The product's roundness is less than 0.008mm and the maximum speed is 8000 rpm..
Check Stock

MYSWEETY 110V 1.5KW Water Cooled Spindle Motor CNC Spindle Motor +1.5KW Converter + 65MM Clamp Mount + 13pcs ER11 Collet + 5M Water Pipe + 110V Water Pump

  • ✅ Package include: ①1 x 1.5KW 110V Spindle Motor ②1 x 1.5KW 110V VFD ③1 x 75W 110V Water Pump ④1 x 196 in Water Pipes ⑤1 x 2.6 in Spindle Motor Mount ⑥1x40 in Electric Wire ⑦10 x Drill Bits ⑧1 x2.8 in Brushes ⑨13 x ER11 Collet(1mm,1.5mm,2mm,2.5mm,3mm,3.5mm,4mm,4.5mm,5mm,5.5mm,6mm,6.5mm,7mm).
  • ✅1.5KW Spindle Motor：Technical Parameters:φ1.16 x 10.5in (Diameter: 2.95cm x Length: 26.7 cm).
  • Weight: 7.05 ib. The spindle motor applied to Lathes, Mills, Car Hoists, Pumps & Conveyors, etc. Used for engraving machine or used with frequency converter..
  • Output Current: 5A. The machine is screwed to ensure the safety and reliability of the use. DC cooling fan low noise, large air volume.The converter has overload protection, overvoltage protection overheat protection etc..
  • ✅75W 110V Water Pump：Power: 75W, Flow: 3000L/H, Hmax: 3.5M, Voltage: 110V/60HZ, Size: L4.8xW3.5xH4.3 in. This is a high-performan....
Check Stock

WEN 33075T 11-Amp Variable Speed 16-Inch Benchtop Milling Machine with Digital Readout and Extra-Large Mill Table

  • Variable speed operation ranges from 100 to 2000 RPM while the LED monitor displays the current spindle speed.
  • Spacious 27.6 by 6.3-inch work table combined with the 14.5-inch max distance between spindle and table provides ample room for larger workpieces.
  • Table travels 19.75 inches along the X-axis and 6.5 inches along the Y-axis while the headstock travels 9.75 inches along the Z-axis.
  • Digital Z-axis DRO depth gauge showcases exact spindle travel for maximum precision.
  • Includes an R8 spindle taper, a 2.75-inch spindle travel, a pre-installed drill chuck (1/32 to 3/4 inch), fine-tune adjustment hand wheels, a transparent chuck guard, an emergency stop button, onboard measurement indicators, a 15-inch swing, two M10-1.5 T-nuts, 12mm T-slots, and a two-year warranty.
Check Stock

2.2KW 3HP Spindle Motor and VFD Set Water Cooled Er20 Collet Chuck CNC Spindle with Matching Variable Frequency Drive Inverter 220V

  • 2.2kw Water-cooled Motor Spindle and Matching Inverter.
  • Four bearing in our spindle motor (2pcs 7005+2pcs7002).
  • 2.2kw Water-cooling High Speed High Precision Spindle.
  • RS485 communication port,adopting standard international MODBUS main circuit control 1.5KW 2HP VFD.
Check Stock

American Bronze, 3/8 x 1/2 x 1/4 Sleeve Bearing, Bronze Bushing Flange, Made in the USA

  • AMERICAN BRONZE: high quality self-lubricating bronze bushings, MADE IN THE USA.
  • Dimensions = .377 x .502 x .250 x .625 x .063 (ID x OD x OAL x FOD x FTH).
  • Material = Bronze SAE 841 (90% copper, 10% tin), Oil impregnated with 30w oil.
  • Properties = Self lubricating for long lasting smooth operation and high durability.
  • Operation = light to moderate load at high speed (rpms).
Check Stock