ReviewsHigh Temperature Printing

R QIDI TECHNOLOGY PA12-CF Nylon Filament 1.75 Black, Carbon Fiber Nylon Filament 1.75mm 1Kg Spool 3D Printer Filament, High Strength, High Precision, No Warpage, Low Moisture Sensitivity

【Excellent Mechanical Properties】An upgraded formulation of 85% PA12 + 15% Carbon Fiber, this brand new Carbon Fiber Nylon Filament has superb strength, rigidity, excellent toughness, outstanding resistance to impact, wear, chemical and temperature, these properties combined making this PA12+CF Filament an ideal choice for printing parts or personalization..
【High Dimensional Stability】PA12-CF is an enhanced composite carbon fiber nylon material, adding 15% carbon fiber, this carefully formulated blend ensures ease of stable prints, extremely high successful rate, outstanding surface finish and good layer adhesion with no warping and less shrinkage..
【Low Moisture Sensity】PA12-CF’s saturated moisture absorption rate is only one tenth of that of ordinary PA6. Its low moisture sensitivity ensures outstanding mechanical and thermal properties even after the moisture conditioning process..
【Tangle Free & Vacuum Aluminum Foil Package】QiDi PA12-CF 1KG filament 1.75 is carefully winded to avoid any tangling issues. And we used vacuum aluminum foil packaging, its water vapor transmission rate is only 0.014%. You can open it for use without drying..
【Printing Skills】QIDI TECH provide a solution for printing carbon fiber, QIDI TECH X-CF is a ....

Check Stock

Youyoute Mini Heater for 3D Printer, Resin 3D Printer Temperature Controller Heating Thermostat Temp Control for LCD DLP 3D Printers

【Use for】Resin 3D printer mini heater designed for Resin 3D printers, it is small but powerful, for use in cold weather. It helps you to heat up the resin and rise the ambient temperature. Make your 3D printer work well, save your time and Resin material..
【Professional design】Our temperature controller use in cold weather,when temperature lower than 75F/24C, will cause so many problems in LCD DLP 3D print. Such as Print not sticking to the bed, Layer adhesion, warming, and so on. Finally, printing fails..
【Professional design】Our 3D printer heater built in high-precision temperature sensor, accurate to 0.1 ℃. Fireproof case, high-quality power cord, all professionally designed for your safe printing..
【Small size】Our 3D printer Thermostat 10.8x5.7x3.2cm/4.25x5.24x1.25 in, 117grams, Prefect for 8-15 inch Resin 3D printer, It only takes 10 minutes from 40F to 80F, for use in cold weather..
【Function】3D printer air controller contains three functions, one is heating, one is Air circulation, and the other is filtering. When the temperature is lower than the set t....

Check Stock

3D Filament Dryer Box Filament Dry Dehydrator 3D Printer Filament Storage Box Keeping Filament Dry During 3D Printing JAYO Dry Box

【Large Capacity and 99% Fitness】JAYO Dryer Box Can Fit The Max Size Coil Is Φ210*85(H)mm, It Works Perfectly with All Standard Filament Diameters....
【Adjustable Temperature Range 35℃~55℃】Suit for All Brand 3D Filament on The Market, You Can Choose Different Temperature of the Drying Box....
【Dry All Your 3D Filament】No Trouble with Poor 3D Printing by Wet Filament, Dryer Box(Filament Holder) can Drying while Printing to Improve 3D....
【Easy to Adjustable Temperature】Only 2 Buttons to Operate The Drying Time and Temperature, Original Setting is 6 Hours and 50℃, You Can Also....
【Warm Tips for Drying and Printing】Baked 3-5 hours Before Printing, It Will Have Better Printing Effect When Used with Printer. You can Try....

Check Stock

Official Creality Direct Drive Extruder Kit,New Sprite Extruder Pro Upgrade Kit for Creality Ender 3/Ender 3 V2/Ender 3 Pro/Ender 3 S1/CR-10 Smart Pro 3D Printers，Support 1.5mm Filament

[Application]100% Original Sprite Extruder Pro Upgrade Kit, just fits for Ender 3/ Ender 3 Pro/ Ender 3V2/ Ender 3 S1/CR-10 Smart Pr0, providing direct extrusion and high temperature printing conditions..
[Easy to install and use] It doesn’t affect the inherent funcion of printer because it is a complete extrusion kit. Comes with a long extruder motor connection cable, tools, accessories and wiring diagram instructions for installation and easy assembly..
[Special Design] Exquisite design, perfect combination of extruder and printing hotend make more powerful functions. Large torque, extrusion force up to 80N. All-metal hot end kit with heating block, titanium throat and cooling block, allowing you to print high temperature materials up to 300°C. Simulation of flow field mechanics and dual fan design results in powerful heat dissipation function and more stable model formation..
[Strong compatibility] Compatible with more types of filaments including PLA/ TPU/ PETG/ ABS, etc. When printing under high temperature, like flexible TPU. It can potimize TPU printing performance. Multi-material capability enjoys more creativity....

Check Stock

Stainless Steel Dial Thermometer 100‑800℉ Barbecue Oven Thermometer Pointer Type Thermometer Dial Thermometers for Kitchen and Outdoor Use

[STAINLESS STEEL MATERIAL] The dial thermometers is made of high quality stainless steel material, which is durable, not easy to rust, and can be used for a long time.
[HIGH TEMPERATURE RESISTANT] Dial thermometer is corrosion resistant, high temperature resistant, environmentally friendly, safe and harmless, and can be used with confidence.
[SCREEN PRINTING TECHNOLOGY] The dial adopts screen printing technology, the scale is clear, with correction points, and the reading is more accurate.
[QUICKLY RESPONSE] This bimetal thermometer is anti vibration, quickly response time, good linearity and stable performance, to meet your various need.
[WIDELY APPLICATION] The thermometer is widely used in many situations, such as temperature measurement of ovens and grills, very suitable for kitchen and outdoor.

Check Stock

SUNLU Filament Dryer, FilaDryer S1 Filament Dry Box, Compatible with 99% of 1KG PLA PETG ABS TPU 3D Printer Filaments, Dehydrator Storage Box, Filament Spool Holder, Black

... Poor 3D Printing by Wet Filament】Wet 3d printing filament will caused to stringing, clogging, poor adhesion, and Layer Shift. SUNLU FDM 3D Filament Dryer Enclosure can drying while printing to improve your 3D model, reducing the impact of the objective environment on the printing of 3d filaments..
【Personalized Temperature Setting】The user can adjust the temperature of the drying box according to different 3d filament type, ambient temperature, humidity and other factors. Adjustable temperature range 35℃~55℃. Suitable for more than 20 kinds of 3d printing filament commonly used in the market.
【Personalized Drying Time Setting】 The default continuous drying time of the drying box is 6 hours, and you can also manually set the drying time. The time setting range is 0~24 hours. Commonly used 3D filament on the market under normal circumstances only need 3-6 hours of drying to achieve a good printing experience and printing effect..
【Compatible with 99% of 3D Filament Spools】A: Maximum capacity of SUNLU dry box is Φ210*85(H)mm. B: Compatible with all the mainstream 3D filament brands SUNLU, GEEETECH, ERYONE, ESUN, AMAZON BASIC etc..
C: Works perfectly with all standard filament diameters 1.75mm/2.85mm/3.00mm..

Check Stock

3D Pen Filament 320 Feet, 16 Colors，Each Color 20 Feet, Bonus 250 Stencils eBooks - 3D Printing Pen PLA Filament 1.75mm, High-Precision Diameter and Kids Safe Refill

... Poor 3D Printing by Wet Filament】Wet 3d printing filament will caused to stringing, clogging, poor adhesion, and Layer Shift. SUNLU FDM 3D Filament Dryer Enclosure can drying while printing to improve your 3D model, reducing the impact of the objective environment on the printing of 3d filaments..
【Personalized Temperature Setting】The user can adjust the temperature of the drying box according to different 3d filament type, ambient temperature, humidity and other factors. Adjustable temperature range 35℃~55℃. Suitable for more than 20 kinds of 3d printing filament commonly used in the market.
【Personalized Drying Time Setting】 The default continuous drying time of the drying box is 6 hours, and you can also manually set the drying time. The time setting range is 0~24 hours. Commonly used 3D filament on the market under normal circumstances only need 3-6 hours of drying to achieve a good printing experience and printing effect..
【Compatible with 99% of 3D Filament Spools】A: Maximum capacity of SUNLU dry box is Φ210*85(H)mm. B: Compatible with all the mainstream 3D filament brands SUNLU, GEEETECH, ERYONE, ESUN, AMAZON BASIC etc..
C: Works perfectly with all standard filament diameters 1.75mm/2.85mm/3.00mm..

Check Stock

2022 Official Sprite Direct Drive Extruder Pro Kit with 80N Stepper Motor, Direct Drive Upgrade Kit for Creality Ender 3 pro, Ender 3, Ender3v2, Ender 3 Max, Support TPU Filament

[Application]100% Creality Original Sprite Extruder Pro Upgrade Kit, just fits for Ender 3/ Ender 3 Pro/ Ender 3V2/ Ender3 Max, providing direct extrusion and high temperature printing conditions..
[Special Design] Exquisite design, perfect combination of extruder and printing hotend make more powerful functions. Large torque, extrusion force up to 80N. Double gear feeding, stable and reliable. The double tooth structure does not damage filaments and the feeding is more reliable and stable. All-metal hot end kit with heating block, titanium throat and cooling block, allowing you to print high temperature materials up to 300°C..
[Strong compatibility] Compatible with more types of filaments including PLA/ TPU/ PETG/ ABS, etc. When printing under high temperature, like flexible TPU. It can potimize TPU printing performance. Multi-material capability enjoys more creativity..
[Easy to install and use] It doesn’t affect the inherent function of printer because it is a complete extrusion kit. Comes with a long extruder motor connection cable, tools, accessories and wiring diagram instructions for installation and easy assembly....

Check Stock

Creality 3D Hardened Steel MK8 Nozzle with High Temperature Resistance Upgraded Tungsten All Metal Nozzle Ends for Makerbot Ender 3 / Ender 3 S1, CR-10 Series, 0.2/0.3/0.4/0.5/0.6 mm (5pcs in One Set)

... time than the normal brass nozzle. The hardness is over HRC60 can reduce the abrasion to the inner and outer of the nozzle during long time printing，more heat-resistant than ordinary brass nozzle，MK nozzles is harder than brass nozzles，which makes it durable accurate and compatible with more filaments..
[High Temperature Resistance ] The max temp of this hardened tool steel nozzle could reach at 450c, suitable for 3D printing at high temperature, compatible material from PLA,ABS to carbon fiber, even PEEK..
[High Precision] these 3D printer nozzles keep stable temperature during printing let the filament out evenly, create more perfect printer item than normal metal nozzle. Also with higher print speed in same print precision.Not easy clog during printing, easy to clean. Made with centering CNC precision automatic lathe and one-time forming technology, make sure the input and output holes are concentric and the interior of nozzle is smooth without burrs..
[Applicability and Compatibility] Our Creality Ender-3 S1 Nozzles suit to almost all FDM printer,could install to MK8 heating block. Our tungsten nozzles fit for 3D Printer Makerbot Creality Ender 3 series and CR-10 series 3D printer, MK8 Makerbot Reprap Prusa I3, compatible with all 1.75mm PLA ....

Check Stock

Creality Sprite Direct Drive Extruder Pro Kit, All Metal Extruder Upgrade Kit for Ender 3/Ender 3 v2/Ender 3 Pro/Ender 3 Max 3D Printer,Dual Gear Dual Fan Design,Support BL Touch/CR Touch

【All Metal Design-High Temperature Printing】Creality Sprite direct drive extruder pro kit perfectly combine extruder and all metal hotend, enables all the Ender-3 series 3D printers a direct extrusion and high temperature printing conditions..
【Dual Gear Feeding- Powerful & Stable】This direct drive extruder adapts double-toothed structure which does not damage filaments, allowing more reliable and stable feeding. The use of gear with 3.5:1 gear ratio which perfectly matches with motor makes extruder force up to 80N. More precise control of feeding withdrawal..
【Small and Exquisite, Bowden & Direct Extrusion Suitable】With Compact and light weight design, 54x50x64.3mm small size, 288g weight. It can be applied to direct and bowden filament feeding to meet printing needs of users at dirct and bowden extrusion. Better effect for PLA, PETG,ABS, TPU and other flexible filament..
【Dual Fan-Efficient Heat Dissipation】Simulation of flow field mechanics and dual fan design results in powerful heat dissipation function and more stable model formation. High quality silent fan with metal fan cover, ensures s....

Check Stock

SUNLU 250g PLA Filament 1.75mm Bundle, 3D Printer Filament, Dimensional Accuracy +/- 0.02 mm, 0.25 kg Spool, 8 Rolls,Black+White+Grey+Burly Wood+Purple+Blue Grey+Grass Green+Pure Yellow

... Poor 3D Printing by Wet Filament】Wet 3d printing filament will caused to stringing, clogging, poor adhesion, and Layer Shift. SUNLU FDM 3D Filament Dryer Enclosure can drying while printing to improve your 3D model, reducing the impact of the objective environment on the printing of 3d filaments..
【Personalized Temperature Setting】The user can adjust the temperature of the drying box according to different 3d filament type, ambient temperature, humidity and other factors. Adjustable temperature range 35℃~55℃. Suitable for more than 20 kinds of 3d printing filament commonly used in the market.
【Personalized Drying Time Setting】 The default continuous drying time of the drying box is 6 hours, and you can also manually set the drying time. The time setting range is 0~24 hours. Commonly used 3D filament on the market under normal circumstances only need 3-6 hours of drying to achieve a good printing experience and printing effect..
【Compatible with 99% of 3D Filament Spools】A: Maximum capacity of SUNLU dry box is Φ210*85(H)mm. B: Compatible with all the mainstream 3D filament brands SUNLU, GEEETECH, ERYONE, ESUN, AMAZON BASIC etc..
C: Works perfectly with all standard filament diameters 1.75mm/2.85mm/3.00mm..

Check Stock