ReviewsHigh Temperature Safety Valve

OTAUPRS 4 Pcs PVR32 Bolt-in Tubeless Tire Valve Stems Fit 0.453 Inch Rim Holes 90 Degree

【HIGH QUALITY】:The Tire Valve stem are constructed of high temperature brass valve cores and ozone resistant EPDM rubber,100% Ozone tested and leak tested, improve the safety of your vehicle..
【FITMENT】:The Brass Snap-in valve stem is standard diameter and is suitable for any passenger car, Light Trucks, Small Trailers, wheelbarrows, Lawn mowers, ATVs, and Motorcycles.
【SPECIFICATION】:Premium EPDM Rubber&Brass Snap-in TPMS valve stem,Rim Hole Diameter in wheel:0.453inches(11.5mm).100 PSI maximum inflation pressure,Package:8PCS TR412 tire valve stem.
【Easy to install】: With a bolted in design, this rubber tire stem is easy and convenient to install, keeping the tire inflated at a constant pressure level and allowing quick check of PSI.
【GOOD After-sales Service】:Please feel free to contact us if you have any question with the tire valve stem,90 days free return or refund..

Check Stock

(Pack of TWELVE) Muzzys Double Seal Flow Through Valve Stem Tire Caps, Inflate Thru for High Pressure Truck Car RV Semi Bus Tires -INFLATE TIRES AND CHECK PRESSURE WITHOUT REMOVING THE CAPS!- V2B DS-1

(Set of TWELVE Caps) Muzzys Inflate Through High Pressure Valve Stem Caps.
Made in the USA! Commonly used for Commercial trucks, RV's, Trailers and Semi's but can used on anything with a valve stem..
Valve has two seals and is protected by a solid, all metal housing with a durable, high-temperature- resistant rubber o-ring inside. Safety feature causes seal to tighten to prevent air loss in case the valve fails..
Double Seal High Pressure Inflate through Valve cap designed for heavy duty and high efficiency use. Gauge and inflate valve extensions directly through the cap..
Replaces any standard valve stem cap as well as V2B and DS-1..

Check Stock

4Inch Dually Valve Stem Extenders,Set of 2Pcs,Heavey Duty,100mm Straight Metal Dual Wheel Valve Stem Extensions for Truck Tires, RV Tires, Motorhome, Coach, Pickup, Motorcycle, Bike, Trailer

【PERFECT SOLUTION】Check your inner dual wheel tire pressure difficult ?Start. Right Now!Just Install this schrader valve stem extension.Fast and effortless make regular tire pressure checks，increase you safety on the road..
【DESIGNED FOR HEAVY LOADS VEHICLES 】High temperature 100% leak-tested nickel-plated copper valve cores and rated up to 150 PSI.Perfect fit for Truck tires, RV, Motorhome, Coach, Pickup, Motorcycle, Bike, Trailer or other heavy dualies wheel vehicles, etc..
【PREMIUM MATERIAL】Made of nickle plated brass,more durable and used for many years as metallic luster as new.Total length 4" (100mm). Not for use with rubber valve stems..
【EASY INSTALL&SAFETY】Solid 3/8" hex nut,fast installation with a deep wall socket or wrench.With no-swivel hex base,secure fixtion,no leakage after long-term use..
【PACKAGE INCLUDE】2 PACK 4Inch/100mm PREMIUM Brass valve stem extensions,metal valve core remover caps and aluminium alloy valve core removal tool..

Check Stock

6 Inch Dually Valve Stem Extenders,Set of 2Pcs,Heavey Duty,150mm Straight Metal Dual Wheel Valve Stem Extensions for Truck Tires, RV Tires, Motorhome, Coach, Pickup, Motorcycle, Bike, Trailer

【PERFECT SOLUTION】Check your inner dual wheel tire pressure difficult ?Start. Right Now!Just Install this schrader valve stem extension.Fast and effortless make regular tire pressure checks，increase you safety on the road..
【DESIGNED FOR HEAVY LOADS VEHICLES 】High temperature 100% leak-tested nickel-plated copper valve cores and rated up to 150 PSI.Perfect fit for Truck tires, RV, Motorhome, Coach, Pickup, Motorcycle, Bike, Trailer or other heavy dualies wheel vehicles, etc..
【PREMIUM MATERIAL】Made of nickle plated brass,more durable and used for many years as metallic luster as new.Total length 6" (150mm). Not for use with rubber valve stems..
【EASY INSTALL&SAFETY】Solid 3/8" hex nut,fast installation with a deep wall socket or wrench.With no-swivel hex base,secure fixtion,no leakage after long-term use..
【PACKAGE INCLUDE】2 Pack 6Inch / 150mm PREMIUM Brass valve stem extensions,metal valve core remover caps and aluminium alloy valve core removal tool..

Check Stock

WISTEK Bluetooth Tire Pressure Monitoring System, with 4 External Sensors TPMS, 5 Alarm Modes and Real-time Displays Pressure and Temperature, Support iOS and Android with APP Operation

...h APP"TPMSII", very stable, quick connection and real-time data transfer. When do the bluetooth scan, the APP will ask for permission of location, please accept as android system request.
【 Five Alarm Modes】 Bluetooth Tire Pressure Monitoring System with High-temperature alarm and low battery alarm, quick & slow leak alarm, High voltage alarm.
【Dynamically Monitor】 This motorcycle Tire Pressure Monitoring System is dynamically monitors all tire pressure and temperature, improves fuel efficiency, and prolongs tire life and ensures driver safety..
【High Accuracy】 Real time monitor with 2 TPMS Sensors, waterproof and anti - corrosion, anti -theft technology, fully qualified for rainy days. High sensitivity, good accuracy for measuring pressure and temperature.
【Installation】 First, Scan the QR code we shipped with the product, download the APP to install. Second, Remove tire valve caps, put in anti-theft screws.
Install outer sensor on tire valve in order.
Hold the sensor, tighten anti-theft screw. make sure sensor installed on corresponding tire valve. T....

Check Stock

3/8” High Pressure Ball Valve for Pressure Washer Gun, Plated Brass Power Washer Shut Off Valve DN10, 3000 PSI (3/8" Female BSP)

... 【Solid Structure】The power washer shut off valve is made of high quality plated brass for compactness, ruggedness, and enhanced rust and corrosion resistance for long-term worry-free use. The high pressure ball valve can reach a maximum working pressure of 3000 PSI and a maximum working temperature of 176 degrees Fahrenheit..
【Leakproof Performance】Power wash ball valve with excellent PTFE (Polytetrafluoroethylene) seals provide perfect leakage protection and improves performance through high heat and chemicals. No need to worry about leaks occurring, ball valve dn10 will definitely save your time and money..
【 Easy to Use 】 Ball valve for foam cannons withstand high pressure operation while providing good leverage, opening and closing pressure washer ball valve effortlessly, allowing safe and easy tool replacement. Helps you switch easily without shutting down the entire system, making your work easier and more convenient..

Check Stock

NORJIN 1-2.5 inches Gate Valve Lockout Device with Safety Padlock, Water Spigot Lock Oil Gas Valve Lock Natural Gas Valve, Red

☑【Gate Valve Lockout Set】 1pcs red gate valve locks and 1pcs padlocks. Suitable for outdoor faucet or electrical locking applications to help prevent the valve from opening during maintenance and repair..
☑【Compatible With】Gate valve locking device and padlock set is suitable for gate valve handles from 1" to 2-1/2" (25mm-64mm) in diameter, with stem diameter up to 3/4 inch..
☑【High Quality Material】 The lockout device is made of polypropylene material, strong and durable, high temperature resistant, impact resistant, and meets OSHA's lockout standard and designed for safety standards..
☑【Wide Application】 Valve locks are commonly used for hose bib, gas, propane and water valves, plus forklift gas valves. Easy to use, suitable for professional and industrial use (not recommended for home use)..
☑【Excellent Service】 If you have any questions or concerns, please feel free to contact us. It is our policy to render the best service to our customers..

Check Stock

American Standard R121 Pressure Balance Rough Valve Body With Universal Inlets/Outlets, No Finish

Cast brass valve body: Durable - quality that will last a lifetime. Ideal material for prolonged contact with water.
Ceramic disc valve cartridge: Assures a lifetime of drip-free performance. Allows easy fine tuning of temperature (125°handle rotation from off to hot).
Pressure balancing valve cartridge: maintains constant output temperature in response to changes in hot and cold Supply pressure. Diaphragm system engineered to eliminate Cross flow. Avoids failure due to mineral deposits - ideal for use in hard water pressure balancing valve cartridge: maintains constant output temperature in response to changes in hot and cold Supply pressure. Diaphragm system engineered to eliminate Cross flow. Avoids failure due to mineral deposits - ideal for use in hard water.
Back-to-back capability: hot and cold can be reversed quickly and easily.
Adjustable hot limit safety stop: limits the amount of hot water allowed to mix with cold. Reduces the risk of accidental scalding.

Check Stock

mistcooling 250 PSI Misting Pump

...ressure: 100 psi Minimum inlet pressure: self- priming. Maximum outlet pressure: 250 psi (depends on line length and numbers of nozzles) maximum flow: 0. 9 GPM full load Amps. 110V AC: 0. 7 amps 12V DC: 4. 0 amps Voltage: 110V-220V AC/ 12V DC (refer manufacturing label on the pump) noise level: 40 dB. Maximum fluid temperature: for room temperature/ cold water applications only.
Max pressure 250 psi Available in 110 V, 220 V & 12 VDC Durable Rust Proof Enclosure Thermal Safety Switch Oil-less Pumps may generate heat, motor manufacturer have installed built-in thermal safety switch to improve the longevity of pumps Standard pump inlet: 3/8-inch push lock Fitting. Standard Pump outlet: ¼ inch Push-lock fitting. Max pressure 250 psi 110 V AC.
1. Solenoid Valve Solenoid valve controls the flow of the water in to the pump. You may leave the inlet water source on at all the time. Water will enter the pump only when main power switch is turned on. Likewise, water flow will be cut off when power switch is turned off. No adjustment is ever required for solenoid valve..

Check Stock

CAT Pumps Pressure Washer Pump - 2.7 GPM 3000 PSI - 4DNX

Concentric, high-density, polished, solid ceramic plungers provide a true wear surface that greatly extends seal life.
Integral Unloader Valve with built-in by-pass is standard, providing a safety measure while controlling pressure..
Fixed chemical injector mounts directly to unloader valve to provide cleaning flexibility.

Check Stock

Bernzomatic TS8000 - High Intensity Trigger Start Torch, 4 Pack

☀ MULTI PURPORSE: Suitable for HVAC, Soldering, Brazing, Welding, Heat-Shrink, Searing Steak, Stripping Paint etc. For Use with MAP-PLUS or Propane Gas..
☀ ERGONOMIC DESIGN: The Non-slip Handle with Matte Texture can Easily Adjust the Valve to Change the Fl-ame, And the Ergonomic Handle Ensures Comfortable Use. Professional Performance, Works in Any Position - Even Upside Down..
☀ HIGH QUALITY: Solid Die Cast Torch Body, Fine Filtered Jet, Instant On / Off Trigger Ignit-ion. The Fla-me Size Can Be Changed Via an Adjustable Valve and Features a Safety Lock to Prevent Accidental Ignit-ion..
☀ HIGH INTENSITY SWIRL FL-AME: Fl-ame Temperature up to 3600℉ with Propane, Fl-ame Temperature up to 3730℉ with MAPP Gas. Able to Output Heat in a Stable and Concentrated Manner..
☀ We Focus On Provide High Quality Products at Fair Price: Professional Factory, Professional Technical Support.
If You Unsatisfy with Our Product, You can Return to Our USA Warehouse, No Risk..

Check Stock