ReviewsHigh Temperature Sight Glass

AR-15 [Explicit]

  • ... are O-ring sealed and will stay dry even go 30cm deep for 30 minutes. The high shock-resistant design makes the sight can withstand bumps, bangs, drops and the rough-and-tumble environment of the field. Nitrogen inside the sight ensures that interior optical surfaces will not fog due to changes in humidity or temperature..
  • 2 Height Mount Options: 5 slots 1" riser mount, with 1/3 lower co-witness, providing for more open and clear view. Machined from aircraft aluminum with matte black anodizing, high quality and durable..
Check Stock

Antstone HVAC Digital Manifold Gauge Set AC Dual Pressure Gauge Refrigeration Repair Tool with 3 Hoses 90 Kinds Refrigeration Data

  • ...e can better protect the product.(Please notice that two 9V batteries are NOT included in the package.).
  • [Multifunction] - 3 working modes: refrigerant pressure mode, vacuum percentage mode, leak detection mode. 5 pressure unit conversions: KPa, Bar, PSI, InHg, KgF/cm². 2 temperature unit conversions: ℃ & ℉..
  • [Explosion-proof Sight Glass] - Through the high-definition glass window, the flow of refrigerant can be clearly observed, so problems can be found in time, so that problems can be detected in time..
Check Stock

Suppressor Height Sights Set, Suppressor Sights for Precise Targeting, Front and Rear Sights Compatible for Glock 17 17L 19 26 27 33 34 38 39 All Models Except 42 and 43.

  • 【Designed to Last】Made of tough and durable steel with a fortress finish coating for maximum protection. The matte black will reduce any glare with some standard sights. The front sight comes with a mounting screw and the rear sight has a co-witness setup combo, which improves stability and visibility during the day..
  • 【Higher Brightness & Precise Shooting】These suppressor height Glock sights set are raised up allowing you to see over the top through the window, which largely help increase higher brightness and precise shooting..
  • 【Special Three-dot Sight Design】Sits just high enough over the body to see but not overly high that it would take too much real estate in glass window. The front sight is slim and the rears are wide which are great for fast sight acquisition..
  • 【Easy to Install】These suppressor height sights set works well with all optics co-witness and is very easy to install. Step1.Loosen the allen head on the glock with the hex key allen wrench and then clean the holes up. Step2. Pull the hex nut screw off and install the front sight. Step3. Put your finger on the front sight and put the screw back. Step4. Slide and push the rear sight. Use the sight pusher tool if you rear sight is tight, do not try to use a hammer and punch..
Check Stock

Red Dot Design Yearbook 2013/2014 , 3 Volume Set

  • Upgrade the new 5X Magnifier+558 Holographic Red Green dot sight Quick-Release Flip Mount Magnifier adds a 5x magnification . Simple, fast, and effective, the push button design engages and disengages the flip mount allowing the magnifier to lock in at your desired position..
  • 5x magnifying glass + 558 red and green dot sight combination set, 5x magnifying glass effect than 3x clearer field of view.The lens are fully multi-coated maximizing resolution, light gathering capability, and color fidelity..
  • Quick Transitions-Simple, fast, and effective. The flip-to-side picatinny rail mount to allow you to shoot either 1X or 5X magnification by simply pushing the magnifier to the side..
  • Durable & Compatible: Tough & shockproof, the hard-coat-anodized machined-aluminum construction ensures durability. Made of high grade aluminum alloy which makes the red dot sight durable and light weight..
  • 558 red dot +5x magnifier is nitrogen purged for reliable waterproof and fogproof performance in the field.Use lens cleaning fluid and optical tissue or cloth to clean lenses.We provide 7x24 hours service, the product is not satisfied. Full refund at any time..
Check Stock

BALDR Digital Shower Clock Splash-Proof Digital Clock for The Bathroom Large LCD Display Monitors Temperature in C/F and Humidity Bathroom Clock & Shower Timer Made from Shatterproof Fiberglass

  • ...itable for use in the kitchen and bathroom..
  • BUILT TO LAST LONGER: The LCD screen of our splash-resistant timer for a shower is made of PET glass, which is significantly stiffer and more durable than regular glass. The clock's screen is less likely to shatter and can prevent injuries due to broken glass..
  • TELLS TIME, TEMPERATURE, AND HUMIDITY: More than just a digital wall clock, this splash-resistant timer also tracks and displays temperature and humidity levels. You can see all three readings in one glance. The timer mode is available in 12/24 format, while the indoor temperature readings are available in Celsius and Fahrenheit..
  • EASY TO READ FROM A DISTANCE: With a large LCD screen and a big, bold digital display, it's easy to tell the time, the indoor temperature, and humidity levels, even from a distance. You can monitor the time, temperature, and humidity as long as the shower clock with the splash-proof casing is within your line of sight..
  • MULTIPLE MOUNTING OPTIONS: This battery-operated clock comes with suction cups, a built-in stand, and a hanging slot, so you can mount it how and where you want. Functional and stylish, it's a fantastic addition to your shower, bathroom, kitchen, and other areas that need a clock, thermometer, and hygromet....
Check Stock

EZshoot Bore Sight 9mm Green Laser Boresighter with 12 Batteries

  • Green Laser Bore Sighter - Bright and clear green laser, the sighting rang is 3 times that of the red laser boresigter at night, so this 9mm green bore sighter is a good choice for keeping a focus on outdoor work..
  • 12 Batteries - Comes with 4 sets (12 total, use three at a time) improved batteries. Each set lasts up to an hour. Please remove the batteries after use..
  • High Accuracy - Spot on accurate, the 9mm bore sight allows you to align with your optics with a few minutes, save your time and cartridges and shells. Sighting range of the bore sight is 15 to 100 yards..
  • Application and Specification - The 9mm green laser bore sight is made to fit the 9mm chamber, caliber specific. The 9mm bore sight laser is class IIIA laser, less than 5mW..
  • Sturdy and Durable - Sturdy and durable brass construction, it is not easy to deform under high and low temperature environments, which can ensure the accuracy of the bore sighter..
Check Stock

OneTigris 7 Round Tactical Shotgun Stock Shell Holder 1000D Nylon Ammo Carrier Hunting Pouch Strip (Black)

  • Highly Visible Red & Green 4 Different styles Reticles..
  • Coated glass for best possible sight picture and lens durability..
  • Kit includes:Aluminum Light Weight scope mount and 1x30 combat reflex sight..
  • A super lightweight aiming solution for your Mossberg 500 High strength Aluminum housing is soft coated in flat black color. This sight provides optimum performance under most everyday sport shooting conditions..
Check Stock

Sleeping with Other People

  • 【High Accuracy】  High accuracy to reduce cartridges and shells wasted, sighting range of the bore sight is 15 to 100 yards. Fast gun zeroing and sighting..
  • 【Sturdy and Durable】Sturdy and durable brass construction, it is not easy to deform under high and low temperature environments, which can ensure the accuracy of the bore sighter..
  • 【3 Sets of Batteries】 Comes with 3 sets (6 total) upgraded batteries. Each set lasts up to an hour. Please remove the batteries after use..
  • 【Application】The 9mm bore sight is made to fit the 9mm chamber, caliber specific..
  • 【Specification】Class IIIA laser, less than 5mW. .
Check Stock

YOUGYM Red or Green Dot Rapid Range Hunting Rifle Scope, Pro Gun Sight Riflescope Mounts Golf Laser

  • 【Dimensions】Magnification 3.0*3.05 X. Exit pupil diameter 0.33+0.02 inches. Objective lens diameter 1.26 inches. Eyepiece diameter 1.14 inches. Length 5.5 inches. Weight 1.1 lbs.
  • 【Fast Focus】The fast focus dial on the eyepiece allows for quick and easy reticle focusing. Anti-reflective coatings on air-to-glass surfaces provide increased light transmission for greater clarity and low-light performance.
  • 【Anti-Water Shock Reticle Sights】Optics stay dry inside, even when totally immersed in water. Shockproof construction,Nitrogen purged fog proofing.
  • 【Nitrogen-Purged Fog-Proofing】Featuring nitrogen-purged fog-proofing, this sight will not fog up due to humidity or rapid temperature changes, so you can always clearly see your target.
  • The Red/Green Dot is a rugged, reliable red dot sight that is at home in a variety of shooting applications. Unlimited eye relief allows for rapid target acquisition.
Check Stock

Schrade Delta Class Divergent 7.4in with 3in AUS-8 Steel Blade and G10 Handle for EDC

  • ... are O-ring sealed and will stay dry even go 30cm deep for 30 minutes. The high shock-resistant design makes the sight can withstand bumps, bangs, drops and the rough-and-tumble environment of the field. Nitrogen inside the sight ensures that interior optical surfaces will not fog due to changes in humidity or temperature..
  • 2 Height Mount Options: 5 slots 1″ riser mount, with 1/3 lower co-witness, providing for more open and clear view. Machined from aircraft aluminum with matte black anodizing, high quality and durable..
Check Stock

SHARROW Archery Recurve Bow Sight Sigle Pin Sights Hunting Accessory Right Hand & Left Hand

  • 0.5/0.75/1.0 Optical Fiber Pin, make archery more precise..
  • The body of the Sight Pin is made of aluminium and the lens is made of glass, durable..
  • Using a lazer machine to drill a precise hole in the lens to ensure the optical is in the center of the lens..
  • Robust and has a standard thread to fit all recurve bow sight..
  • Supplied with a spare glass lens washer and 2 spare pins. Internal sight size is 10mm..
Check Stock