ReviewsHigh Viscosity Shade

Valvoline, All Fleet Plus, 15W40, 1 Qt

  • Price For: Each Timken OK Load: Not Specified Four-Ball Wear: Not Specified Series: All-Fleet(R) Plus Item: Diesel Engine Oil Dropping Point: Not Specified Size: 1 qt. ISO Viscosity Grade: Not Specified Application: For Automotive Engines Including Turbo Charged, Lighttruck Gasoline Engines Requiring API Service Standards: All Products Meet API And SAE Standards Container Type: Bottle.
  • Base: Conventional Temp. Range: - SAE Grade: 15W-40 Color: Clear/Bright Viscosity @ 100C: 15.3 Viscosity @ 40C: 114.9 Pour Point: -30 Degrees C Flash Point: 230 Degrees C Viscosity Index: 139 Country of Origin (subject to change): United States.
Check Stock

Idemitsu CVT Type N (NS-2) Transmission Fluid for Nissan - 5QT

  • Precisely engineered frictional characteristics outstanding anti-shudder performance in CVTs equipped with torque converter.
  • Exact frictional properties provides superior performance in demanding, high torque applications.
  • Provides superior deposit control and protects metal surfaces from rust and corrosion.
  • Advanced anti-wear technology provides maximum protection to belt and pulleys.
  • Precisely engineered formulation provides excellent viscosity control minimal viscosity loss due to shearing, outstanding low temperature fluidity, enhanced lubricant film strength at high temps.
Check Stock

Amsoil Synthetic Marine Gear Lube 75W-90 (1 Quart)

  • Less slippery low sulfur formula compatible with brass synchronizers.
  • Stable at high temperatures in performance applications.
  • Also available as lighter viscosity like MTL and MT-85.
  • Satisfies gear oil viscosity requirements of 75W.
Check Stock

Motul 105776 Set of 4 Dexron III Automatic Transmission Fluid 1-Liter Bottles

  • For use in all systems where DEXRON or MERCON standard is required. // For automatic gearboxes/torque converters/power steering systems/boat reversing gears/hydrostatic transmissions/hydraulic or mechanical systems that require DEXRON or MERCON standards..
  • MOTUL DEXRON III can be used (and mixed) for applications where DEXRON/B DEXRON/DEXRON II D/DEXRON IIE/DEXRON III is required..
  • Technosynthese ATF features more fluid at low temperature than Dexron IIE oils, which allows easier gear change in cold weather..
  • Higher oxidation resistance than Dexron IIE standard. // Oil film stability under high temperature. // Anti-wear, Anti-corrosion, Anti-foam..
  • Color: Red. // Density at 20°C (68°F): ASTM D1298. // Viscosity at 40°C (104°F): ASTM D445/33.4 mm²/s. // Viscosity at 100°C (212°F): ASTM D445/7.2 mm²/s. // Viscosity Index: ASTM D2270. // Flash Point: ASTM D92/204°C/399°F. // Pour Point: ASTM D97/-48°C/-54°F..
Check Stock

West System 105B Epoxy Resin (126.6 fl oz) Bundle with 205B Fast Epoxy Hardener (27.5 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)

  • BUNDLE INCLUDES: West System 105B Epoxy Resin (126.6 fl oz), 205B Fast Epoxy Hardener (27.5 fl oz), and 300 Mini Pumps Epoxy Metering Pump Set (3-Pack).
  • WEST SYSTEM EPOXY: Based on 105 Epoxy Resin, West System Epoxy is a versatile low-viscosity epoxy system. It is used for boat building, composite construction and repairs that require high-strength, waterproof coating, bonding, and filling. It readily wets out fabrics and porous materials, and is easily modified for a wide range of working conditions and applications.
  • NO STRONG SOLVENT ODOR: 105 Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cP) at 72-degree-F (22-degree-C).
  • PRE-WARM THE RESIN AND HARDENER: Cold temperatures increase an epoxys viscosity, making it harder to dispense, mix and apply. Warming resin and hardener reduces their viscosity, so they flow easily through their dispensing pumps. To pre-warm, place the resin and hardener containers under a warming lamp or in a warm-water bath. Pre-warmed resins and hardeners will not cling as much to your mixing equipment.
Check Stock

BAOSHISHAN NO.2 Zahn Cup Viscosity Cup #2 Dip Type 44ml Stainless Steel Viscometer Flow Cup for Paint Finishes Oil Dye Sauce Honey

  • Volume of cup: 44ml, Efflux time(sec): 20-80S.
  • Range of measurment: 20-250 centistokes (cSt).
  • Meets with ASTMD 4212 standard for measuring viscosity using dip-type cups..
  • The Stainless Steel Cups are molded precisely and the orifices are precision drilled using high-speed CNC drilling..
  • BAOSHISHAN Zahn Cups with solid construction are used to measure the flow behavior of liquids such as paints. Applicable to the construction site to quickly measure the viscosity of the paint to be sprayed.
  • more widely used in electronic products, plastic coatings industry, home made sauce, hydraulic oil and liquid viscosity in lab..
Check Stock

BAOSHISHAN Rotary Viscometer Viscosity Tester 10-100,000mPa·s Fluidimeter Meter Newton Liquid Viscometer (NDJ-1)

  • [±5% ACCURACY] The viscometer uses a graduated disk, and the viscosity values are measured by moving the rotor rotation through the spinneret and spindle, has a large viscosity measurement range 10-100,000cps and the measurement error: ±5%, give your enough resolution to control my processes better..
  • [ROTORS x ROTATION RATE] Different rotors (1,2,3,4) can be selected according to the viscosity range of different test liquids, and different speed (60,30,12,6) can be set. The knob adjustment is straightforward with a coefficient table on the top for easy reference. You can unlock more unknown liquid viscosity..
  • [LIGHT WEIGHT BUT PRACTIALl] The rotary viscometer is light in weight, easy to move and operate flexibly. The helical gear lifting system effectively ensures that the viscometer can move up and down easily without sliding down by itself, which ensures the smooth progress of your experiment..
  • [APPLICATION] NDJ-1 has been widely used to determine and measure the liquid viscosity in many application such as grease, painting, plastic, pharmacy and adhesives. There are no limitations about the liquid, just put the rotor into the liquid and test it. But the liquid you measure should NOT exceed 80℃.
  • [GOOD WARRANTY] Viscosity meter tester is a precison ....
Check Stock

Red Line 57904 75W90 Synthetic Gear Oil - 1 Quart

  • Less slippery low sulfur formula compatible with brass synchronizers.
  • Stable at high temperatures in performance applications.
  • Also available as lighter viscosity like MTL and MT-85.
  • Satisfies gear oil viscosity requirements of 75W.
Check Stock

OEMTOOLS 24399 Vacuum Pump Oil, 8 oz, Hydrotreated, 8oz Vacuum Oil Change Tool Accessory, Widely Compatible for Fluid Pump, Automotive, Electrical, and Mechanical Systems

  • Premium: Extremely high quality, hydrotreated vacuum pump oil.
  • Engineered to maintain viscosity even in extreme temperatures.
  • Essential: Don't damage your equipment with substitute oils.
  • Your vacuum extractor depends on regular service and the quality and purity of your vacuum pump oil.
  • Clean: Used oil contains contaminants like moisture, acids, vapors, and dirt.
  • Vacuum pump oil should be changed after each use to improve performance and the life of the pump.
  • Universal: This mechanical lubricant is compatible with pumps made by most manufacturers.
  • Specifications: 225 Viscosity SUS at 100 degrees Fahrenheit.
Check Stock

TRIAX Synthetic OEM Grade Power Steering Fluid, Universal, Arctic Grade -50 Cold Flow, Fits Most Asian, US, and European Cars, Full Synthetic with Esters, Widest Spec Application (1 Quart)

  • Meets or exceeds the specifications requirements for most European, Asian, and US vehicles power steering / servo hydraulic steering systems in modern vehicles.
  • compatible with all types of seals materials in virtually all power steering systems.
  • universal top off and complete fill formula.
  • the green color mixes with any color power steering fluid.
  • Extremely high viscosity index assures superior control in both exceedingly hot and very cold climates (-50F).
  • Exceptional oxidation stability assures the fluid will not thicken or foul up with time.
  • very high heat tolerances without losing viscosity and properties.
  • contains high-quality elastomers and seal conditioners to maintain seal integrity for at least 150,000 miles.
  • contains top tier custom built optimized additive pack.
  • protects all metals including servo/power steering pumps from corrosion and rust.
  • ultra-rapid aeration and water separation.
Check Stock

Heavy Duty Double Sided Mounting Tape, Traceless and Removable Nano Adhesive Tape for Outdoor and Indoor, Permanent Clear Two Sided Gel Grip Tape (10 FT)

  • Toughest Industrial Strength Mounting Tape: The heavy duty mounting tape is made of Nano gel material, which can maintain high viscosity for a long time. 1-Inch Nano tape can hold up to 1lb on smooth surfaces.
  • Traceless After Removal: The Nano tape can be easily removed without any tools, and will not leave any residue on the object or the surface. However, we do not recommend using it on a stucco wall because it may peel off paint due to its high viscosity when you remove it.
  • Weatherproof For Indoor And Outdoor Use: Our double-sided adhesive tape can work in the temperature range from 0F to 150F. It can stay strong sticky for long periods though in strong winds, heavy snow, cold and high temperatures weather..
  • Washable And Reusable: The double sided gel tapes are reusable to avoid polluting the environment. When the tapes become dirty, you can rinse the surface with water and then let it dry naturally or blow-dry to restore its high viscosity.
  • Multi Application: Nalisence Nano Tape is faster, safer and more versatile than screws and nails. You can use it to fix or paste car phone ....
Check Stock