ReviewsHigh Voltage Ptfe

24V 40W 620 Ceramic Cartridge Heater with 3950 100K NTC Thermistor with 1 Meter Wiring for RepRap 3D Printer Heatbed Hot End

  • 1 Meter long wire with high temperature PTFE insulated wiring and female pin head, 1.25mmx2.0mm glass bead.
  • Temperature sensor 100KΩ accuracy of ± 1%.
  • 24V 40W 620 Ceramic Cartridge Heater and NTC Thermistor 100K 3950 for 3D Printer Creality CR-10S Pro, CR-X,Ender 3,Ender 3 Pro, Ender 3 V2,Prusa....
Check Stock

BVV 1/4\ 37 Degree Female JIC Stainless Steel Hose-24-inch

  • 1/437° Female JIC Stainless Steel Braided PTFE Hose These chemically resistant PTFE braided hoses are a necessity when dealing with harsh chemicals or solvents and high-pressure applications..
  • They provide a uniquely rugged, durable, and chemically resistant combination of Stainless Steel and PTFE by having an inner core of PTFE and protecting that with a braided stainless steel outer sleeve. These hoses have female JIC swivel on each end and they DO NOT require Teflon tape to create a seal | BVV 1/437 Degree Female JIC Stainless Steel Hose..
Check Stock

10FT 6 AN 3/8\ Nylon Stainless Steel Braided PTFE E85 Tube Fuel Line Fittings Kit with 6PCS Swivel Fuel Hose Fitting Adapters

  • 【High Quality】This hose features an PTFE inner layer which is compatible with E85, wrapped by a single layer of stainless steel and nylon. These lines do not deteriorate or swell over time due to E85 use like non-PTFE fuel line. PTFE fuel line holds up a lot stronger to heat and extreme circumstances than the nylon braided fuel line..
  • 【Application】The fuel line is widely used in fuel system, transmission system and cooler system and can be compatible with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel, and etc..
  • 【Package Includes】The 6an nylon and stainless steel braided PTFE fuel line kit includes: 6pcs 6an PTFE hose ends (2pcs straight, 2pcs 45 degree, 2pcs 90 degree) and 3/8 PTFE braided fuel line (Length:10ft/3M)..
  • 【Work Condition】The 6an PTFE hose working temperature range: -76℉ to 446℉ (-60℃ to 230℃). It is compatible with nearly every substance or agent used. Maximum Working Pressure (psi): 3000 psi. Bursting Pressure (psi): 10000psi..
  • 【Service】100% satisfaction guarantee, If you have any issues with the part , simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you..
Check Stock

Archetype QIDI Technology High Temperature Stainless Steel Nozzles with High Temperature PTFE for All QIDI TECH 3D Printers All Sizes (2pcs) (36mm (X-Max/X-Plus/X-One/Qidi Tech I))

  • QIDI TECHNOLOGY High Temperature (.4mm) Stainless Steel Nozzles & High Temperature Capricorn PTFE Tubing..
  • Wear resistant Stainless Steel Nozzles & Capricorn PTFE - regarded as the highest quality to withstand printing High Temperature filaments such as ABS, Nylon, Poly-carbonates and more..
  • Available for ALL QIDI Technology 3D Printers & ALL PTFE Sizes (i-Fast/i-Mate/i-Mates/X-Max/X-Plus/X-Pro/X-Maker/X-Smart/X-One/Qidi Tech I).
  • Package includes: (2Pcs) Stainless Steel Wear Resistant Nozzles - (0.4mm) (2pcs) Capricorn PTFE tube: (All Sizes).
  • Same Day Shipping before 2:00 P.M. Central Std. Please feel free to contact us at any time for additional Nozzle and PTFE sizes. We will gladly provide custom solutions tailored to any request. We will reply to you within 24 hours..
Check Stock

SIQUK 2 Pcs PTFE Teflon Tube 2M 4 Pcs PC4-M6 Quick Fitting 4 Pcs PC4-M10 Straight Pneumatic Fitting Push to Connect for 3D Printer 1.75mm Filament

  • CHPOWER PTFE is well regarded as the highest quality PTFE tubing in all of 3D printing. The tight tolerances make sure that the filament is lead....
  • High Lubricity Additives make our XS Series tubing the lowest friction Bowden tubing on the market. Less friction means more responsiveness, less....
  • Upgraded Pneumatic Fittings with metal teeth provided in this package work much better than the stock options provided by many cheap 3D printer....
  • One PTFE cutter with an extra sharp razor is also included to ensure that the PTFE is cut flat on both sides to prevent any malfunctions or heat creep....
  • High Temperature Resistance due to using only the highest quality PTFE. Our XS tubing will operate at even higher temperatures than our TL..
Check Stock

MECCANIXITY PTFE Lab Stirrer Bearing Adapter 21.5mm to 25mm Stopper for 8mm Diameter Shaft Stirring Rod

  • PTFE Lab Stirrer Bearing Adapter is used for fixing electric stirring rods in a flask to stir a liquid or solution in the biology and chemistry field, research laboratory applications, etc..
  • In the package of: 1 x PTFE Lab Stirrer Bearing Adapter.
  • Made of PTFE material, corrosion-resistant and has good resistance to high temperature(temperature tolerance range:-180 °C~250 °C), smooth surface, easy to clean..
  • It is detachable, comes with a sealing o-ring for good sealing performance. Easy to use, usually used with double-paddle PTFE electric stirring rod..
  • Please check if this size is what you need..
Check Stock

MECCANIXITY PTFE Lab Stirrer Bearing Adapter 16.5mm to 20mm Stopper for 7.7mm Diameter Shaft Stirring Rod

  • PTFE Lab Stirrer Bearing Adapter is used for fixing electric stirring rods in a flask to stir a liquid or solution in the biology and chemistry field, research laboratory applications, etc..
  • In the package of: 1 x PTFE Lab Stirrer Bearing Adapter.
  • Made of PTFE material, corrosion-resistant and has good resistance to high temperature(temperature tolerance range:-180 °C~250 °C), smooth surface, easy to clean..
  • It is detachable, comes with a sealing o-ring for good sealing performance. Easy to use, usually used with double-paddle PTFE electric stirring rod..
  • Please check if this size is what you need..
Check Stock

MECCANIXITY PTFE Lab Stirrer Bearing Adapter 21.5mm to 25mm Stopper for 8mm Diameter Shaft Stirring Rod 2Pcs

  • PTFE Lab Stirrer Bearing Adapter is used for fixing electric stirring rods in a flask to stir a liquid or solution in the biology and chemistry field, research laboratory applications, etc..
  • In the package of: 2 x PTFE Lab Stirrer Bearing Adapter.
  • Made of PTFE material, corrosion-resistant and has good resistance to high temperature(temperature tolerance range:-180 °C~250 °C), smooth surface, easy to clean..
  • It is detachable, comes with a sealing o-ring for good sealing performance. Easy to use, usually used with double-paddle PTFE electric stirring rod..
  • Please check if this size is what you need..
Check Stock

TPI TP-183A/S1-TP-183A 183a TRUE RMS DMM MULTIMETER WITH DUTY CYCLE,LOW-PASS FILTER CAPACITANCE AND TEMPERATURE

  • LOW-PASS FILTER, CAPACITANCE, AND TEMPERATURE, A085 cULus SILICON TEST LEADS WITH A150 SCREW ON ALLIGATOR CLIPS, A106 TEMPERATURE INPUT ADAPTER,.
  • GK 13M TYPE-K BEADED THERMOCOUPLE PROBE WITH PTFE INSULATION(UP TO 400F).
  • BASIC DC ACCURACY:0.5% / DC VOLTAGE(MAXIMUM)1000V / INPUT IMPEDANCE:10MΩ / RESOLUTION(MAXIMUM): 0.01mV / AC VOLTAGE(MAXIMUM)750V.
  • INPUT IMPEDANCE:10MΩ / RESOLUTION(MAXIMUM): 0.01mV / DUTY CYCLE: 0.1 TO 99.9%.
  • TEMPERATURE(MAXIMUM)2372F / CAPACITANCE(MAXIMUM)4000uF.
Check Stock

3 Pack PTFE Teflon Sheet for Heat Press Transfer Sheet Non Stick 12 X 16 Heat Transfer Paper Reusable Heat Resistant Craft Mat Non Stick Paper Washable and Reusable Heat Resistant Craft Mat

  • EXCELLENT QUALITY: PTFE Sheet Is Made Of High Temperature Resistant Waterproof Glass Fiber Fabric, Which Can Withstand High Temperature Up To....
  • WIDELY USED: PTFE Sheet Can Be Used In Various Craft Projects, Such As Grill Pads, Non-Stick Oven Liners, Ironing Protectors, Heat Press....
  • EASY TO CLEAN: PTFE Sheet Has Non-Stick Property And Waterproof Function, So It Is Very Easy To Clean, Such As Wipe Glue, Paint, Wax Or Clay,....
  • REUSABLE: PTFE Sheet Is 3 Pieces Per Package, 12x16 Inches In Size, Made Of Food Grade TELFON, Reusable..
  • QUALITY ASSURANCE: Our Team Is Committed To Providing 100% Satisfactory Service To Each Customer. If The Product Has Quality Problems Within....
Check Stock

New All Balls Fuel Pump Module 47-1029 Compatible With/Replacement For Can-Am Outlander DPS 450 EFI, Outlander DPS 570 EFI 2016-2020, Outlander L 450 EFI 2015-2016, Outlander L 500 EFI 2015

  • ➰APPLICATION- All fuel, lube, alcohol, ethanol, coolant and gas for automotive and marine. Black braided PTFE fuel line can be used as fuel injection hose, turbo oil feed and boost line, transmission oil cooler line, EFI fuel line, carb fuel line, ls engine swap fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and other high-temperature and high-pressure applications..
  • ➰WORKING ENVIRONMENT-Maximum Working Pressure=725 psi(5 mpa). Bursting Pressure=2175psi(15 mpa). Working Temperature Range=-40℉ to 392℉(-40℃ to 200℃)..
  • ➰SIZE- length=20 feet. Inner diameter=0.51 inches (12.95 mm). Outer diameter=0.63 inches (16 mm)..
  • ➰MATERIAL- Inner layer: PTFE (Teflon) rubber.
  • middle layer: 304 stainless steel wire mesh sleeve.
  • outer layer: braided nylon. PTFE fuel lines are more resistant to high temperature and pressure..
  • ➰NOTE- PTFE hoses are relatively hard and cannot be bent or folded in half.Double check the hose size before ordering.Professional installation is highly recommended..
Check Stock