ReviewsHigh carbon Steel Blade

gonicc Professional Adjustable 33\+ 13\ Hedge Shears. Handle Length Range 19\-32\

  • ...ative plants. Reach any shrub far and high! The overall length in closed position is 33" and the overall length in extended mode is 46". Made of aluminium alloy and rubber , the non-slip handle is of high quality, Ergonomic designed make it more stable, durable and more comfortable during the garden work..
  • SK-5 High Carbon Steel Blades - Quality blade made of high carbon SK-5 steel. SK5 carbon steel blades are ultra strong, sharper and stays sharper than your ordinary blade and lasts even longer! No more worrying about a pruning lopper blade that might become dull after just a few cuts. And the newest hollow blades technology will reduce the resistance better when you used it to trimming and shaping..
  • Shock Absorbing Design - The shock-absorbing design will prevent most of shock during the trimming and reduce fatigue of arms and shoulders..
  • Adjustable Blade Pressure - You can adjust the screw at the bottom of blade to change the pressure between two blades, it will make you easily to prune different types of plants..
  • Durable and Stable - The high-quality construction ensures that the products will last you for years to come..
  • Attention - For protecting the blade out of rust, we coated some Antirust Oil at blade. So it is nomal when you receive the product....
Check Stock

10.75 inches long Kukri point Blank blade, hand forged Ladder pattern Damascus steel hunting knife blade, knife making supplies, 3 Pin hole scale, 6" sharp cutting edge

  • Overall 10.75 inches Long hand forged full tang Ladder pattern Damascus steel blank blade.
  • 6 inches long cutting edge. Up to standard of Kukri point blade skinning Knife.
  • 4.5" long Scale space with 3 Pin holes for extra strength of scale..
  • Approximately 5 mm Thick Ladder pattern Damascus steel clip point blade. Our Damascus steel is prepared by forging over 465 layer of high carbon and low carbon steel..
  • Blade is made of Hand forged Damascus steel by forging the 1095 and 15N20 high and low carbon steel.
Check Stock

11 inches Long Kukri Point Dao Blank Blade, Hand Forged Twist Pattern Damascus Steel Hunting Knife Blade, 5" Finger Serrated Space with Finger Guard, 6" Sharp Cutting Edge

  • Overall 11 inches Long hand forged full tang twist pattern Damascus steel blank blade.
  • 6 inches long cutting edge. Up to standard of Kukri point blade skinning Knife.
  • 4.75" long finger serrated Scale space with finger guard.
  • Approximately 5 mm Thick twist pattern Damascus steel Kukri point blade. Our Damascus steel is prepared by forging over 200 layer of high carbon and low carbon steel..
  • Blade is made of Hand forged Damascus steel by forging the 1095 and 15N20 high and low carbon steel.
Check Stock

BPS Knives Blank 06 - Blank Blade for Knife Making - 5 Carbon Steel Rat Tail Blade - Scandinavian Scandi Grind Knife Blank - DIY Knives Making Blades

  • Carbon Steel Knive Blade Blank for making knifes. Blade Blanks Hidden Tang(Rat-tail).
  • Knife Making Kit: Partial Blade Knife and Bolster. DIY knife set. Durable and robust carbon steel knife blank.
  • True Scandi Grind 1066 High Carbon Steel. Scandinavian Sharpening Blade Blank Hardness 58-59 HRC.
  • Custom Knife Kit for Making Outdoor Camping Survival Bush Knife no Handle.
  • Blade length - 5.1"(130 mm), Blade thickness - 0.1"(2.7 mm), Overall length - 8.5"(215mm).
Check Stock

Whole Earth Supply Extra Large - Raindrop Damascus Tracker Blank Blade Knives Knife Making Blanks

  • Overall 11 inches Long hand forged full tang Damascus steel tracker knife blank blade.
  • 6 inches long cutting edge. Up to standard Tracker and camping Knife blank blade.
  • 4.5" long Scale space with 3 Pin holes for extra strength of scale..
  • Approximately 5 mm Thick fire pattern Damascus steel clip point blade. Our Damascus steel is prepared by forging over 465 layer of high carbon and low....
  • Blade is made of Hand forged Damascus steel by forging the 1095 and 15N20 high and low carbon steel.
Check Stock

11 inches long Damascus steel tracker knife blank blade, hand forged Ladder pattern Damascus steel tracker knife, Camping knife with 4 Pin hole, 6 inches cutting edge, 4.5' scale space

  • Overall 10.75 inches Long hand forged full tang Damascus steel tracker knife blank blade.
  • 5.5 inches long cutting edge. Up to standard Tracker and camping Knife blank blade.
  • 4.5" long Scale space with 4 Pin holes for extra strength of scale..
  • Approximately 5 mm Thick Ladder pattern Damascus steel Tracker blade. Our Damascus steel is prepared by forging over 465 layer of high carbon and low carbon steel..
  • Blade is made of Hand forged Damascus steel by forging the 1095 and 15N20 high and low carbon steel.
Check Stock

Whole Earth Supply 1095 High Carbon Steel Clip Point Partial Tang Knife Blank Blade Hunting Skinning Skinner 1095HC

  • 1095 High Carbon Steel Clip Point Partial Tang Knife Blank Blade Hunting Skinning Skinner 1095HC.
  • Dimensions: 7.5 inches Approximate Overall Length, 3.25 inches Approximate Cutting Edge Length, 3.5 inches Approximate Handle Length (Push Tang), 1.25 inches Widest Part of Blade, 0.5 inches Widest Part of Handle, Approximately 4mm Thick (1/8 inch).
  • High quality 1095HC (high carbon) steel construction..
  • Blade comes sharpened. A final edge may be applied for an even sharper razor edge..
  • High carbon steel has extreme durability, resistance to chipping, easy sharpening and high edge retention..
Check Stock

SWORD ART ONLINE: Hollow Realization Deluxe Edition - Nintendo Switch [Digital Code]

  • SET OF 2 SWORDS: Sword Art Online Kirito Kirigaya Sword Set Elucidator/Dark Repulsor.
  • (Elucidator) Overall Length: 41 Inches. Blade Length: 29 Inches. Blade: High Carbon Steel, Quenched Blackened, 3/4 Tang..
  • (Elucidator) Edge: Unsharpened, Cosplay. Guard: Solid Metal, Steel Inner Frame, Powder Coated Black & Silver. Handle: 8 Inches, Wooden, Black. Includes: Wooden Scabbard, Black.
  • (Dark Repulsor) Overall Length: 41 Inches. Blade Length: 29 Inches. Blade: Carbon Steel, Powder Coated Finish. Edge: Unsharpened, Cosplay Replica..
  • (Dark Repulsor) Guard: Metal, High Gloss Painted. Handle: Half Tang,Wood Painted With Fiber Glass, High Gloss Paint. Includes: Wooden Scabbard.
Check Stock

TRUEKATANA Black Katana, Handmade Japanese Katana Sword T10 Folded Clay Tempered Steel with Black Scabbard

  • Katana, t10 carbon steel, handmade, full tang, clay tempered, real hamon, hand forged, battle ready, blade polished, sharpened, 40.5 inches, gold-plated tsuba, black cord handle, piano paint scabbard.
  • Folded t10 high carbon steel blade, hamon and hardness created with temper process..
  • Clay tempering imparts strength, flexibility, real hamon, not wire brushed or printed..
  • Expertly hand forged by seasoned sword-smiths using advanced techniques honed over centuries.
  • Overall length: 40.5 inches, nagasa length: 28.3 inches, handle length: 10.2 inches, blade sharp: sharpened, blade material: t10 carbon steel, blade width: 1.18 inches, saya material: wood, weight: 2.65 lbs.
Check Stock

8 inches Long Hand Forged Damascus Steel Blank Blade Skinning Knife with 3 Pin Hole & an Inserting Hole Space 4 inches Cutting Edge

  • Blade is made of Hand forged Damascus steel by forging the 1095 and 15N20 high and low carbon steel.
  • Overall 8 inches Long hand forged full tang Damascus steel blank blade.
  • 4 inches long cutting edge. Up to standard skinning and Hunting Knife.
  • 4" long Scale space with 3 Pin and an inserting holes for extra strength of scale..
  • Approximately 4 mm Thick Twist pattern Damascus steel clip point blade. Our Damascus steel is prepared by forging over 465 layer of high carbon and low carbon steel..
Check Stock

10 inches Long Damascus Steel Nessmuk Blade Skinning Knife, Knife Making Supplies, Hand Forged rain Drop Pattern Damascus Steel Blank Blade Hunting Knife, 5.25" Cutting Edge, 4.5" Scale Space

  • Overall 10 inches Long hand forged full tang Damascus steel blank blade.
  • 5.25 inches long cutting edge. Up to standard Nessmuk skinning and Hunting Knife blank blade.
  • 4.5" long Scale space with 3 Pin holes for extra strength of scale..
  • Approximately 5 mm Thick rain drop pattern Damascus steel clip point blade. Our Damascus steel is prepared by forging over 465 layer of high carbon and low carbon steel..
  • Blade is made of Hand forged Damascus steel by forging the 1095 and 15N20 high and low carbon steel.
Check Stock