ReviewsHigh current Connector

Frienda 12 Pieces Red 6-10 Gauge Battery Quick Connector 50A 12-36V Battery Quick Disconnect Wire Harness Plug Kit for Motor Recovery Winch Trailer

  • Suitable for: the battery quick connector provides simple and convenient method for connect or disconnect power to a winch or other electrical device such as remote battery chargers, power inverter, solar setups, trailers, or for any other purpose requiring a high-current, quick-disconnect connector.
  • What you receive: the package comes with 12 sets 6-10 gauge battery quick connectors, including 12 pieces connectors, 24 pieces terminal pins and 12 pieces caps, enough quantity to meet your different needs or replacement.
  • Durable to use: the battery quick connector plug is made of sturdy PC fire-retardant material with fitted rubber boot covers to protect against dust, durable and reliable to use, not easy to break, have long service time.
  • Convenient installation: you can install these battery quick connector or disconnect plug quickly, just insert the wires into the terminal pins, and then solder or crimp them, connector ends are identical, so either ends are suitable for connection to the power or load side.
  • Stable function: there are 24 terminal pins made of red copper coated with silver in the package, which possess strong electrical conductivity and can reduce the resistance to ensure stable voltage and current.
Check Stock

BESPROTOOLER 6 Sets Red 50A 6-10 Gauge Battery Quick Connector 12-36V Towing Winch Quick Connect Systems Wire Harness Plug Kit for Auto Car or Trailer

  • SAFE AND DURABLE: Our battery connector plugs are made of PC material, which is sturdy and flame-retardant, not easy to break, long time of use, and safer operation. Using silver-plated copper terminals, strong conductivity, low resistance, to ensure stable voltage and current..
  • WITH HANDLE: Our battery connector plug has a handle, which makes the disconnection of the connector fast, simple and safe. It is more labor-saving and safer, and it also has a cover to protect the plug and prolong the service life..
  • EASY TO INSTALL: These quick connect/disconnect battery connector plugs replace the standard clamps on the battery charger. The installation is quick and simple, the working current is 50A, and the voltage is 6AWG 600V. Please use it within the rated range..
  • MULTI-FUNCTION: Provide reliable power supply for car, trucks and RVs to connect or disconnect winches, traction and dump trailers, audio equipment, solar panel systems and other electrical equipment..
  • WIDE RANGE OF USES: Battery connector plugs are often used in remote battery chargers, inverters, solar devices, trailers, etc. We provide high-quality quick-connect components, strictly follow the quality standards, and can be used with confidence..
Check Stock

TICONN 250Pcs Heat Shrink Wire Connectors, Waterproof Automotive Marine Electrical Terminals Kit, Crimp Connector Assortment, Ring Fork Spade Butt Splices

  • 【PREMIUM QUALITY】: Thick copper barrel ensures strong secure crimping every time, providing minimal voltage drop, high current flow, and less heat. These will prevent short circuits and problematic wiring that inferior connectors are known for.
  • 【DURABILITY】: Each butt, ring and fork terminal features a thick tinned copper barrel that resists corrosion to hold the wire tight when crimped. The barrel is created from one piece of copper that eliminates the problem of the barrel opening. Your wire will never slip out of the connector.
  • 【WATERPROOF】: Insulation tubing has unique dual-walled design. High quality 3:1 shrinkage tubing has a heat-activated sealant lining to provide a 360-degree secure seal. It's flame-retardant, waterproof, and can be used underground.
  • 【WIDE APPLICATIONS】: Compliant with all electrical standards, Perfect for marine and automobile applications, whether you are working on your boat, Vehicle, Home or scientific project, our electrical crimp connector will ensure strong watertight seal to make sure everything bond correctly.
  • 【TYPE and SIZE】: The connector assortment includes red, blue and yellow connectors that can be used on wire AWG from 22 to 10. Five connector types: butt connector, ring connector (stud si....
Check Stock

TICONN 500Pcs Heat Shrink Wire Connectors, Waterproof Automotive Marine Electrical Terminals Kit, Crimp Connector Assortment, Ring Fork Spade Butt Splices

  • 【PREMIUM QUALITY】: Thick copper barrel ensures strong secure crimping every time, providing minimal voltage drop, high current flow, and less heat. These will prevent short circuits and problematic wiring that inferior connectors are known for.
  • 【DURABILITY】: Each butt, ring and fork terminal features a thick tinned copper barrel that resists corrosion to hold the wire tight when crimped. The barrel is created from one piece of copper that eliminates the problem of the barrel opening. Your wire will never slip out of the connector.
  • 【WATERPROOF】: Insulation tubing has unique dual-walled design. High quality 3:1 shrinkage tubing has a heat-activated sealant lining to provide a 360-degree secure seal. It's flame-retardant, waterproof, and can be used underground.
  • 【WIDE APPLICATIONS】: Compliant with all electrical standards, Perfect for marine and automobile applications, whether you are working on your boat, Vehicle, Home or scientific project, our electrical crimp connector will ensure strong watertight seal to make sure everything bond correctly.
  • 【TYPE and SIZE】: The connector assortment includes red, blue and yellow connectors that can be used on wire AWG from 22 to 10. Five connector types: butt connector, ring connector (stud si....
Check Stock

Amass 10PCS Black XT90E-M Battery Plug Gold-Plated Male Connector DIY Connecting Parts for RC Aircraft Drone Accessories

  • Genuine Amass Connector,XT90E-M connector with high temperature resistant material.
  • Material:made of good quality plastic and metal,durable and strong..
  • XT90E-M Connector for RC Lipo Batteries Drones Airplanes Cars Vehicles..
  • With high current indurance performance ,it could be used many times..
Check Stock

Ubiquiti airMAX Omni AMO-5G10, 5GHz, 10dBi, Next-Gen 2x2 Dual Polarity MIMO Omni Antenna

  • WiFi Antenna 10dBi Omni with RP-SMA Connector for Wireless Network Router/USB Adapter/PCI PCIe Cards/IP Camera/Wireless Range Extender.
  • Increases the Range of Your Wireless Device Such as Router, Access Point, Mini PCIe Network Card, Wireless Wan Range Extender, Security Camera.
  • Simply Replace Current Antenna to Increase Signal Strength, Extend Wireless Range to Dead Spot (Make Sure the Original Antenna is Detachable).
  • 1 x 10dBi RP-SMA FEMALE (No Pole Inside Connector) Antenna for 2.4GHz For 802.11 B/G/N Frequency.
  • Gold Plated RP-SMA Connector( Screw-On Swivel ) NO PIN Inside the Antenna (Female Connector).
  • High-Power and High-Senstive Computer Networking Antennas for 2.4Ghz Frequency Only.
Check Stock

BETAFPV 8pcs BT2.0 300mAh 1S Battery 4.35V 30C/60C FPV Lipo with 1.0mm Banana Connector for FPV Tiny Whoop 1S Brushless Whoop Drone Like Cetus FPV Kit Meteor65 Micro Whoop Drone

  • 【9A Continuous current】BETAFPV exclusive designed BT2.0 Connector AKA 1.0mm Banana connector which can support 9A continuous current and 15A burst....
  • 【Discharge Rate】The discharge of the BT2.0 300mAh 1S lipo is improved a lot that the voltage drops more slowly, so pilots can enjoy more flight....
  • 【1.0mm Banana Connector】1.0mm Banana Connector is more durable in terms of fit and conductivity than crimped pin. Highly recommend to use our....
  • 【Flight Time】Discharge curve is higher than PH2.0 battery which means it can discharge more current in the same capacity and provide more power.....
  • 【Extra Adapter Cable】Pilots can charge BT2.0 battery by PH2.0 charger with BT2.0-PH2.0 adapter cable(NOT INCLUDED), no need to buy additional....
Check Stock

WARN 26405 Quick Connect Winch Power Cable for Front of Vehicle, 90\ Length

  • Heavy-duty & multipurpose universal battery quick connector- fits all UL rated at 600 volts DC or AC devices, batteries, power inverters and solar setups, winches, forklifts, chargers, power modules, cars, motorcycles, boats and etc..
  • Connect/disconnect in one second keeping things neat and organized! Suited for high-current use with winches rated 8,000 pounds or higher! Replace standard clamp ends on your battery charger to prevent accidental reverse polarity when hooking up a charger and have provisions for mounting so they can be easily secured to a vehicle..
  • Ultralight design with tight weather covers for 100% safety. Combined shell made from polycarbonate- a versatile and tough plastic, makes this connector sturdy and reliable..
  • Comes with 4 terminal pins made of red copper coated with silver. Features strong electrical conductivity and reduces the resistance to guarantee stable voltage and current..
Check Stock

FLY RC 10 Pairs Traxxas TRX Plugs Lipo NiMh Brushless High-Current Connector ESC Battery RC Connector (10 Pairs)

  • The Traxxas High-Current connector flows current like a firehose with virtually zero voltage loss due to power-robbing resistance..
  • The patent-pending Traxxas connector is a better-engineered solution for real-world use. Large, textured surfaces on the plug bodies.
  • Package Contents:10pcs x Male shell, 10pcs x Female shell, 40pcs x Gold plated connectors..
  • Shrouded wire connections eliminate the extra steps to install heat shrink tubing. Beefy, gold-plated copper terminals with large, spring-loaded.
  • contact areas ensure a perfect connection every time. Even after thousands of uses, Traxxas connectors maintain their precision feel and incredibly low resistance.
Check Stock

BETAFPV Meteor65 1S Micro FPV Whoop Drone Quadcopter for FPV Racing Freestyle Flight Indoor Outdoor with F4 1S 5A Flight Controller 0802SE 19500KV Motor C03 Camera - Frsky

  • 【Upgraded Meteor65】Meteor65, 1S lightweight whoop drone comes back with a completely new look. Equipped with the BT2.0 connector, the lightest F4 1S 5A FC (2022), new 0802SE 19500KV motors, and a C03 FPV camera. With the combination of those electronics and parts, it reaches the best balance between performance, weight, durability, and premium build design..
  • 【F4 1S 5A FC】The flight controller of Meteor65 has been upgraded to F4 1S 5A SPI Frsky V3.0. with a high-quality BMI270 gyro and BB51 ESC hardware. Reserve two UART ports, frsky version also can be used as the PNP version. Therefore, pilots can connect the external receiver to it..
  • 【Power System】By using the latest 0802SE 19500KV motors and 31mm 3-blade props, this equipment ensures excellent performance of power and thrust. Makes the perfect dynamic balance, which gives the drone more flexibility and longer flying time..
  • 【Camera&Canopy】Built-in 1.52g ultralight weight C03 camera, offer a high-quality, clear and sharper images to pilots. Adopted with a injection molding canopy which only 1.60g, more durable, anti-ruin, and heat-resitant, gives your whoop drone a good protection..
  • 【BT2.0 Connector】BT2.0 connector has decreased internal resistance of connector effectively allowing ....
Check Stock

Antrader 3-Pack 60mm x 60mm x 15mm 6015 12V Brushless DC Cooling Fan 2pin for DIY 3D Printer Extruder Humidifier

  • 3 Pack high quality brushless 6015 DC 12V fan, sleeve-bearing design cooling cooler..
  • Plastic construction 9 blade fan. Dual Ball Bearing.
  • DC Brushless Cooling Fan, Rated Voltage: DC 12V, Current: 0.1A.
  • 40 x 40 x 10mm Fans. Connector: 2 Terminal Connector with 2pin-ph2.560 x 60 x 15mm Fans. Connector: 2 Terminal Connector with 2pin-ph2.5.
  • Compact motor design for computer case 60mm 3d Printer fan used in humidifier, aromatherapy and other small appliances series.
  • small heat radiating communication equipment.
  • intelligent industrial control equipment plate cooling heat, high precision medical equipment cooling.
Check Stock