ReviewsHigh low Screw

Fastcom Press-In Threaded Insert Aluminum, Compatible With Metal, 5/16\-18 Internal Threads External Threads, 0.615\ Length (Pack of 50)

【Premium Quality 】 Used in various low strength materials, which can improve the wear resistance of bolt connections and avoid the damage of thread. The locking type wire screw sleeve can lock the screw into the threaded hole, so that the screw is not loose when subjected to shock vibration, which is better than the normal locking device..
【Effect】 Because of a certain elastic, can make the load on the thread is more even, eliminate the screw and screw hole deviation between the pitch and tooth type, and can absorb vibration, thus increasing the screw thread connection strength and resistance to fatigue strength..
【Material】 Made of high quality Stainless Steel, good corrosion resistance and never rust, durable to use,have a long time..
【Special】 Wear resistant. Used for frequent disassembly, it can greatly improve the life of thread. Anti-loose. Especially for the aircraft and other products requiring high insurance coefficients..
【Easy to maintain】 The damaged screw holes shall be put into the wire screw sleeve , which can be used again to avoid the possibility of damage to the workpiece..

Check Stock

RATTMMOTOR SM1204 SFU1204-500mm /19.69in Length Ballscrew with Ball Nut Standard End Machining Diameter 12mm(0.47in) Pitch 4mm(0.16in) + BK/BF12 End Support + DSG16H Nut Housing for CNC Router Machine

【Package Include】- End Machined ballscrew SFU1204-500mm length with nut + BK10/BF10 end support with locknuts and circlips + 1204 Ball nut housing..
【Basic Description】- SFU1204 series end machined ball screw adopts rolling thread manufacturing process, C7 grade conversion and rolling screw, the accuracy can reach 0.05mm. Fine workmanship, overall quenching treatment, high hardness, abrasion resistance, which is durable..
【End support & Nut Housing】Ball screw vertical end supports BK10 and BF10, built-in deep groove ball bearings and matching lock nuts and snap rings, high precision, corrosion resistance, and 1605 nut housing matching ball screw, simple assembly and convenient installation..
【Main Features】- The ball screw is equipped with a deflector single flange ballscrew nuta nd built-in balls, which can easily convert rotary motion into linear motion, with low friction, low noise, and smooth operation. In addition, it is equipped with a dustproof ring, which can prevent dust from entering the nut, which is beneficial to the normal operation of the screw rod..
【Application Areas】- SFU1204 series ball screws are suitable for various scenarios such as lathes, CNC machine tools, machining, mechanical equipment, automation devices, et....

Check Stock

UTG 1\/2PCs Med Pro Max Strength Picatinny Rings, 22mm Wide , Black

... 8-slot 3.34" Long picatinny rails design,allowing you add on any standard picatinny or weaver accessories, Ideal for mounting scopes, optics and red dot sights, flashlight or other accessories..
✌【Perfect Fit On Picatinny Rail】Riser mounting base fits on standard 21mm Picatinny/ Weaver rail. Two locking thumb screw design on side for easy and quick install or remove. ✍ [ Note: Tighten the screw of the low profile riser mount by allen wrench]..
✌【See Through Design, Sturdy & Durable】Design in see-through style, provide potential visibility for open sights, meanwhile hollowed-out configuration helps to release heavy duty.
Made from premium aluminum alloy & high-strength steel, with matte black hard coat anodized, lightweight solid, safe durable..
✌【Available In 0.5 Inch Low Profile & 1 Inch High Profile】Low Profile - 0.5'' Saddle Height - 8 Slots / 3.34 Inch Length - Weight: 2.8 Oz - with 1 x Allen Wrenchs - 1Pcs.
High Profile - 1'' Saddle Height - 8 Slots / 3.34 Inch Length - Weight: 4.12 Oz - 1Pcs. The combination of High and Low allows you to replace each other in different scenarios, perfectly meeting your various needs!.

Check Stock

MAZEL Golf Driver 10.5 Degree & Sand Wedge,Bundle of 2

AERODYNAMIC SHAPED FOR SPEED:The aerodynamic shape delivered fast ball speeds at the most critical phase of the swing,this breakthrough design add extra weight to be placed in the rear of the club to create high MOI and improved sweet spot..
LARGER FORGIVENESS & LOW SPIN :460CC CNC CUP face with high rebound performance promotes maximum speed, forgiveness ,bring you optimal launch with low spin properties..
EXTRA SCREW FOR BACK WEIGHT: Heavy Back Weighting with Extra screw removes weight from the front to reposition it low and back in the head for a lower,deeper Center of Gravity,great for long & high tee shots..
SUPER SAND WEDGE:56 degree loft wedges with high polish finish,corrosion resistant for more durable use even if you play game in the wet grass.Made in the same place as some of today's "top" golf clubs.Right handed for all skill levels,from junior to scratch golfers!.
MICRO-MILLED HIT FACE:Our golf wedge face is processed with micro-milled technology,which offers more forgiveness at impact. For great spin, control and consistency from the sand, fairway, fringe or rough..

Check Stock

M6 Alloy Steel Hand Screw Tap & Tools for M6 Wire Thread Inserts & 304 Stainless Steel M6 Wire Thread Inserts Helical Threaded Insert Kit

【Premium Quality 】 Used in various low strength materials, which can improve the wear resistance of bolt connections and avoid the damage of thread. The locking type wire screw sleeve can lock the screw into the threaded hole, so that the screw is not loose when subjected to shock vibration, which is better than the normal locking device..
【Effect】 Because of a certain elastic, can make the load on the thread is more even, eliminate the screw and screw hole deviation between the pitch and tooth type, and can absorb vibration, thus increasing the screw thread connection strength and resistance to fatigue strength..
【Material】 Made of high quality Stainless Steel, good corrosion resistance and never rust, durable to use,have a long time..
【Special】 Wear resistant. Used for frequent disassembly, it can greatly improve the life of thread. Anti-loose. Especially for the aircraft and other products requiring high insurance coefficients..
【Easy to maintain】 The damaged screw holes shall be put into the wire screw sleeve , which can be used again to avoid the possibility of damage to the workpiece..

Check Stock

Wax Paddle Hot Plate Lab Denture New Dentist Dental Instrument Rogson Rims -6

Screw extractor is made of 4241 steel,with high hardness,durable,and easy to take out damaged screws.
The stripping screw extractor kit includes two extension drills.
It can be taken out in one step without modifying the extractor or adjusting the mandrel.
The wire stripping screw puller kit includes 20 wire stripping screw pulling devices,with 10 different sizes,suitable for screws or screws of any size.
It is best to use an electric drill,not the hammer drill mode!It should be used at low speed.

Check Stock

10 Pcs Wire Insert Thread 304 Stainless Steel Wire Screw Sleeve Inserts Thread Repair Kit M8x1.25x3D

【HIGH QUALITY MATERIAL】Made of high quality stainless steel, which offers good corrosion resistance, they also have superior rust resistance and the excellent of oxidation resistance. High hardness for long time service, the hardness of the wire screw is higher than the screw, so it has little wear and tear in connection with screw,and can be used repeatedly.
【ELASTIC DESIGN】Deep thread, not easy to slick, because of a certain elastic, can make the load on the thread is more even, eliminate the screw and screw hole deviation between the pitch and tooth type, and can absorb vibration, thus increasing the screw thread connection strength and resistance to fatigue strength.
【ANTI-LOOSE】The locking type wire screw sleeve can lock the screw into the threaded hole, so that the screw is not loose when subjected to shock vibration, which is better than the normal locking device, used for frequent disassembly, it can greatly improve the life of thread.
【7 SiZE ASSORTED HELICOIL KIT】The kit contains 7 kinds of size: M3(10pcs), M4(10pcs), M5(10pcs), M6(10pcs), M8(10pcs), M10(5pcs), M12(5pcs). Totally 60 piece. Package into a plastic grids case and each size sorted a grid separately, widely used in daily life,mainly used in various low strength mate....

Check Stock

MAZEL Golf Driver 10.5 Degree & Chipper Wedge 45 Degree,Bundle of 2

AERODYNAMIC SHAPED FOR SPEED:The aerodynamic shape delivered fast ball speeds at the most critical phase of the swing,this breakthrough design add extra weight to be placed in the rear of the club to create high MOI and improved sweet spot..
LARGER FORGIVENESS & LOW SPIN :460CC CNC CUP face with high rebound performance promotes maximum speed, forgiveness ,bring you optimal launch with low spin properties..
EXTRA SCREW FOR BACK WEIGHT: Heavy Back Weighting with Extra screw removes weight from the front to reposition it low and back in the head for a lower,deeper Center of Gravity,great for long & high tee shots..
IMPROVE YOUR SHORT GAME: This MAZEL chipper wedge is specially designed for those golfers who struggle with short game,effectively eliminated thin and fat chips shots from the fringe and around the green compared with the traditional irons,give you more confidence and improve short game instantly..
CHIP THE BALL EASILY:Our golf chipper with 330g heavy club head,plus lower center of gravity make it easy to chip the ball shot,reduce the friction through the turf or sand..

Check Stock

QWORK 4080U Z-axis Screw Slide Table Linear Actuator Kit, 7-7/8" High Precision Linear Module for Engraving Machines, Laser Printers, 3D Printer and DIY CNC Router Parts X Y Z Axis, 200mm Black

Excellent performance: The linear screw adopts all-metal structure, fine workmanship, stable performance, high working efficiency, safe to use, corrosion-resistant..
High precision: Heavy load resistance, high precision, low friction coefficient and strong versatility..
Low resistance: The rotary motion is transformed into a linear motion, small frictional resistance..
Widely used: Used in cutting machines, DIY CNC engraving machines, laser printers, small CNC machine tools and other equipment..
Lead: 0.31 inch ( 8mm ), the lead screw moves 0.31 inch in one turn. Overall length: 9.8 inch, Length of aluminum section: 7.8 inch, T-type screw length : 9.45 inch..

Check Stock

100pcs Stainless Steel SS304 Coiled Wire Helical Screw Thread Inserts M8 x 1.25 x 2D Length for Helical Repair

Helicoil thread repair kit is easy to maintenance, install a thread insert into a damage screw hole, then the screw hole can be used as normal, in order to avoid workpiece loss..
The steel thread inserts can effectively improve screw connection, greatly improving the reliability..
M8 helicoil is suitable for parts that requires frequent removing, it can greatly improve service life and wear-resistance of screw thread..
Helicoil m8x1.25 can prevent screw from getting loose,especially used for products requiring high coefficient of insurance..
Used in all kinds of low strength materials, thread inserts can largely improve the wear resistance performance of screw connection, and avoid thread damage..

Check Stock

50pcs Helical Threaded Inserts Stainless Steel Coiled Wire Helical Screw Thread Inserts M8 x 1.25 x 1.5D Length

WIDELY USED:Stainless steel thread inserts used in low strength materials such as aluminum, magnesium, can avoid thread damage and get a good connection performance, to enhance connection strength and improve connection condition..
USED FOR PARTS:Used for parts that requires frequent removing, it can greatly improve service life and wear-resistance of screw thread..
A CERTAIN ELASTICITY:Because of a certain elasticity, thread insert can even the load distribution on each thread, eliminate pitch and tooth deviation between screw and screw hole, and absorb vibration, thus increasing the screw thread connection strength and fatigue resista.
ADVANTAGE :It can prevent screw from getting loose, especially used for products requiring high coefficient of insurance..
EASY TO MAINTENANCE:Easy to maintenance, install a thread insert into a damage screw hole, then the screw hole can be used as normal, in order to avoid workpiece loss..

Check Stock