ReviewsHigh performance Bottoming Tap

Airpro Fork SBK-102 Snowbike Bottoming Kit

  • Standard snowbike setups weigh 65 to 85 pounds more than a stock dirt bike (BEFORE you add racks, packed snow, spare gas, etc), which can lead to violent bottoming and bent lower fork tubes..
  • The AirPro allows riders to add 8-15 PSI to a spring fork, significantly increasing bottoming resistance and ride height..
  • This accessory provides a low cost option for riders to achieve great results while using independently, or in conjunction with a front fork revalve/respring (depending on rider skill level)..
  • Add 8-15 PSI to significantly improve bottoming resistance and increase ride height.
  • Fraction of the cost of re-spring/re-valve.
Check Stock

Airpro Fork SBK-103 Snowbike Bottoming Kit

  • Standard snowbike setups weigh 65 to 85 pounds more than a stock dirt bike (BEFORE you add racks, packed snow, spare gas, etc), which can lead to violent bottoming and bent lower fork tubes..
  • The AirPro allows riders to add 8-15 PSI to a spring fork, significantly increasing bottoming resistance and ride height..
  • This accessory provides a low cost option for riders to achieve great results while using independently, or in conjunction with a front fork revalve/respring (depending on rider skill level)..
  • Add 8-15 PSI to significantly improve bottoming resistance and increase ride height.
  • Fraction of the cost of re-spring/re-valve.
Check Stock

86PC Tap and Die Set Combination Metric Tap and and Die Set Tungsten Steel Titanium SAE and Metric Tool

  • Premium Quality: High-duty heat-treated Tungsten steel construction,  high-hardness, wear-resistant, and its service life is 5-10 times longer than that of non-tungsten taps, durable and reliable for your long-lasting use..
  • Excellent Performance: Fully ground & high-precision tap is super-sharp for your tapping and chip removing operation, running smooth and efficient, offering you excellent performance..
  • Reinforced Stability: Each dies is designed with a lock hole, it can be locked tightly after the screw is aligned and locked, ensures double stability during your operation..
  • Adjustable Tap Wrench: Tap wrench is adjustable: you can set the adjustable basin wrench to either its position for turning clockwise (tightening) or turning anti-clockwise (loosening). You can do this by flipping the jaws 180 degrees over its pivot..
  • Sae And Metric Included: This  tap and die set comes with 86 pieces in total: 39 pcs taps,39 pcs dies, 2 tap holders (M6 to M20 - 1/4" to 3/4"& M3 to M12 - 1/16" to 1/2"), 2 die holders (M25 - 1") & (M38 - 1-1/2")and 1 T-bar tap wrench, most popular sizes included..
Check Stock

AQUA CREST Faucets Filter Cartridge BPA Free, Replacement for Brita® Faucet Filter - Chrome (Pack of 2)

  • Filter lasts up to 4 months or 100 gallons for optimum performance, which will vary based on water quality. Efficient coconut carbon block for ultimate purification by reducing harmful contaminants. The filter is easy to install. No tools required. You can find specific instructions in the box.(The activated carbon is made from natural coconut shells. Please confirm whether you are allergic to it.).
  • Stronger water flow: Your time is precious! AQUACREST faucet filter meets the requirements of both high efficiency and rapid filtration without waiting for premium filtered water..
  • We stand behind the quality of filtration and overall performance of our filters. The filter is of high quality at economical price..
  • Interchangeable with Brita faucet filter, Brita 36311 filter replacement, Brita 36312 Tap Water Filter, Brita FF-100 filter replacement, Brita chrome faucet filter, Brita FR-200 replacement filter, GLACIER FRESH GF36311, Fits all Brita Tap Water Filter Systems: Brita Basic Tap Water Filter System, Brita 10060258356189 35618 Tap Water Filtration System, Brita 7540545 On Tap Faucet Filter System, Brita COMINHKR063772 Tap Water Filtration System. This filter is not sourced by or sponsored by Brita..
Check Stock

Happybuy 110Pcs Tap & Die Set Tungsten Steel Titanium Tap & Die Metric Tool Tap & Die Combination Set For Cutting External & Internal Threads

  • Premium Quality: High-duty heat-treated Tungsten steel construction,  high-hardness, wear-resistant, and its service life is 5-10 times longer than that of non-tungsten taps, durable and reliable for your long-lasting use..
  • Excellent Performance: Fully ground & high-precision tap is super-sharp for your tapping and chip removing operation, running smooth and efficient, offering you excellent performance..
  • Reinforced Stability: Each dies is designed with a lock hole, it can be locked tightly after the screw is aligned and locked, ensures double stability during your operation..
  • Adjustable Tap Wrench: Tap wrench is adjustable: you can set the adjustable basin wrench to either its position for turning clockwise (tightening) or turning anti-clockwise (loosening). You can do this by flipping the jaws 180 degrees over its pivot..
  • Most Popular Sizes Included: This tap and die set comes with 110 pieces in total: 35 pcs plug taps, 35 pieces taper taps, 35 pcs dies, 2 tap holders(M2 - M12 (1/16" - 1/2"& M6 - M20 (1/4" - 3/4")), 2 die holders (200mm (1" diameter bore)& 270 mm (1 1/2" diameter bore) and 1 T-bar tap wrench, most popular sizes included.
Check Stock

Tusk Billet WP Fork Adjuster Knobs Blue For KTM 350 SX-F 2017-2022

  • Standard snowbike setups weigh 65 to 85 pounds more than a stock dirt bike (BEFORE you add racks, packed snow, spare gas, etc), which can lead to violent bottoming and bent lower fork tubes..
  • The AirPro allows riders to add 8-15 PSI to a spring fork, significantly increasing bottoming resistance and ride height..
  • This accessory provides a low cost option for riders to achieve great results while using independently, or in conjunction with a front fork revalve/respring (depending on rider skill level)..
  • Add 8-15 PSI to significantly improve bottoming resistance and increase ride height.
  • Fraction of the cost of re-spring/re-valve.
Check Stock

6 Pack Titanium Combination Drill Tap Bit Set Screw Tapping SAE 6-32NC 8-32NC 10-24NC 10-32NC 12-24NC 1/4-20NC(Golden)

  • Complete Set: Set of 6 pcs drill bit tool, 6 different size tap drill bit, M3 x 0.5mm pitch, M4 x 0.7mm pitch, M5 x 0.8mm pitch, M6 x 1.0mm pitch, M8 x 1.25mm pitch, M10 x 1.5mm pitch, a variety of specifications to choose from, convenient for work..
  • 3-in-1 Combination Tap: Drilling - tapping - chamfering, three-in-one composite tap with hexagonal handle can be achieved in one step without frequent replacement, and the operation is more convenient and faster, high processing efficiency..
  • Professional Tools: The standard 1/4 inch hex shank can be installed on ordinary electric drills and bench drills, with strong locking force and not easy to slip. The pointed tap can be tapped to the bottom of the blind hole, large helix angle, better chip removal performance.
  • Premium Material: Our tapping bits are made of high-speed steel with titanium coating. They have high hardness, sharpness and wear resistance, high heat resistance and strong cutting performance. They are a good helper for cutting high-hardness materials..
  • Widely Application: Our tap drill bits have strong cutting toughness, suitable for various cutting series, processing range: copper, aluminum, brass, iron plate, steel, metal sheet, plastic and other metals..
Check Stock

ENHANCE Mechanical Keyboard O Ring Ultra-Quiet Switch Dampeners Damper Firm 50A Clear 140pcs Key Cap Remover Cleaning Brush Cloth and Accessory Bag - Mod Kit for Cherry MX TTC Kaihua

  • ENHANCE KEYBOARD KIT is the essential accessory kit to keep your mechanical keyboard in pristine condition and operating at peak performance. Reduces....
  • 140 SILICONE O-RING DAMPENERS limit noise on keys and provide faster actuation with smooth key bounces | 50A Shore (Firm) Transparent O-Rings allow....
  • ROUNDED KEYCAP PULLER lets you remove mechanical keys with little effort and no restraint | Cleaning brush and cloth help maintain the cleanliness and....
  • REDUCES KEY STROKE SOUNDS: The O-rings reduce the bottoming out "clack" sound of each key as it hits the bottom of the keyboard. This does not affect....
  • 50A (FIRM) O-RINGS: Firmer O-rings provide a traditional feeling keystroke but eliminates the bottoming out "clack" sound of your keyboard and reduces....
Check Stock

Happybuy 86PC Tap and Die Set Combination Metric Tap and Die Sae Tap and Die Set Tungsten Steel Titanium SAE and Metric Tool (86PC Tap and Die)

  • Premium Quality: High-duty heat-treated Tungsten steel construction, high-hardness, wear-resistant, and its service life is 5-10 times longer than that of non-tungsten taps, durable and reliable for your long-lasting use..
  • Excellent Performance: Fully ground & high-precision tap is super-sharp for your tapping and chip removing operation, running smooth and efficient, offering you excellent performance..
  • Reinforced Stability: Each dies is designed with a lock hole, it can be locked tightly after the screw is aligned and locked, ensures double stability during your operation..
  • Adjustable Tap Wrench: Ta wrench is adjustable: you can set the adjustable basin wrench to either its position for turning clockwise (tightening) or turning anti-clockwise (loosening). You can do this by flipping the jaws 180 degrees over its pivot..
  • Most Popular Sizes Included: This tap and die set comes with 86 pieces in total: 39 pcstaps,39 pcs dies, 2 tap holders (M6 to M20 - 1/4" to 3/4"& M3 to M12 - 1/16" to 1/2"), 2 die holders (M25 - 1") & (M38 - 1-1/2")and 1 T-bar tap wrench, most popular sizes included..
Check Stock

Greenfield Threading 330088 Metric High Speed Steel Jobber Drill Plug Hand Tap Set (18-Piece Set)

  • Features:003cbr003e 1:Complete hole drilling, tapping, deburring and countersinking in one operation with power impact tool.003cbr003e 2:Back tapered beyond tap to prevent thread damage from over-drilling.003cbr003e.
  • 3:Made from high-speed steel, these combination drill and tap bits are designed to tap up to 10-gauge wood, plastic copper, brass, aluminum, sheet metal and other soft materials. They are not suitable for drill and tap in very hard metals..
  • 4:A perfect countersink drill bit set, a perfect tap and die set, two in one, one-step processing, greatly save processing steps and time costs, improve working efficiency..
  • 5:High speed steel construction provides extra durability to drill bits to perform multiple drilling operations while maintaining its strength..
  • 6:Self-centering point, do not need assistant center drilling or center punching..
Check Stock

86 Piece Metric and SAE Standard Tap and Die Bearing Steel Tools Set, Titanium Coated with Metal Carrying Case Amazing Tour

  • ...Tap and Die Set Perfect to create new threads or repair damaged threads on most metals like carbon steel, cast iron, aluminum, brass, copper and stainless steel, Metric Tap and Die Set, Ideal for rethreading fasteners and fastener holes for auto and machinery repair. Perfect set for the professional craftsman..
  • ➤[ Performance]: 40 Piece Tap and Die Set, All cutting teeth are precisely CNC machined and accurately heat treated to Rockwell hardness 60 HRC for best threading performance,Tapered coarse and fine taps and dies start threading more easily and smoothly, and prevent overthreading.Tap and die set,is designed to thread cutting: tap is used to process internal thread,while the die is for external thread..
  • ➤[Materia]: 40-Piece SAE tap and die set, Use Industrial grade GCr15 bearing steel construction, ensures durability and tool longevity, Can complete any work with confidence.SAE tap and die set Other Names: 40-Piece SAE tap and die set, SAE tap and die set 40 piece, 7559 Tap and Die Set, Essential Threading Tool, tap and die set SAE and standard, best choice 40 piece tap and die set, tap and die set SAE and standard craftsman.
  • ➤[Package include]: 17xTaps for Internal Threads.
Check Stock