ReviewsHigh performance Scopes

AUTOUTLET P6100 Universal Oscilloscope Probe with Accessories Kit 100MHz Oscilloscope Clip Probes with BNC to Minigrabber Test Lead Kit

  • Universal Oscilloscope Probes 10:1 and 1:1 Switchable Bandwidth 100MHz.
  • Usable with Scopes having Bandwidth up to 100 MHz.
  • Interchangeable Probe Tip. High Sensitivity, Excellent Performance and Reliable Function.
  • Used with Oscilloscopes from All Manufacturers , Equipped with The Standard BNC Connector..
Check Stock

Hantek PP80B 2pcs Oscilloscope Scope Clip Probe 1x:10x Oscillograph Rapier 80MHz

  • Universal Oscilloscope Probe 10:1 and 1:1 Switchable Bandwidth 200MHz,Usable with Scopes having Bandwidth up to 200 MHz.
  • Interchangeable Probe Tip.High Sensitivity, Excellent Performance and Reliable Function.
  • Fully-Shielded Welded BNC Connector, Small Signal Interference.
  • Pure Copper Plated Gold Pin for Good Contact Test Versatility and Capability..
  • Used with Oscilloscopes from All Manufacturers , Equipped with The Standard BNC Connector..
Check Stock

Monstrum Extended Series Offset Picatinny Scope Mount for Long Range Scopes | 1 inch Diameter | Black

  • Built specifically for long range scopes - 6-24x magnification scopes and above - with 3 inches of spacing between scope rings to accommodate scopes....
  • Lightweight one-piece scope mount for mounting standard 1 inch diameter tube rifle scopes - with weight comparable to a set of lightweight rings,....
  • Mounts to any flat top Picatinny rail equipped rifle with custom Picatinny locking bolts that slot seamlessly into your Picatnny rail with zero wiggle....
  • 2 inches of forward extension allows extra flexibility for optimum eye relief and shooting position.
  • Mount frame crafted from lightweight 6061 grade aluminum with hardened steel Torx mounting hardware to prevent stripping of the bolts.
Check Stock

Aim Assist High Offsett Bubble Level for 30mm Riflescope Anti-Cant

  • High offsett allows the bubble level to be easily read while looking through scope.
  • Slim design allows the level to be easily installed on most scopes.
  • Comes with all installation tools and hardware.
Check Stock

NightForce Scope Adjustment Clamp-on Power Throw Lever Compatible with ATACR F2, SHV 14x /20x, SHV 10, Illuminated Only, A289

  • FAST MAGNIFICATION CHANGES - This threaded Power Throw Lever allows instant magnification changes in all conditions, even while wearing gloves.
  • WORKS PERFECTLY - If your scope doesn't include the threaded PTL, such as the NXS and SHV scopes, or you prefer a larger throw lever, our clamp on PTL will work perfectly.
  • NO MODIFICATION NEEDED - Machined from aluminum and anodized in the USA, the Clamp-On PTL requires no modification of the scope to use.
  • COMPATIBILITY - This model of NightForce Clamp-on Power Throw Lever is compatible with the following scopes: ATACR F2 (Gen1), SHV 14x, 20x, SHV 10x, Illuminated Only.
  • NIGHTFORCE - Since 1992, Nightforce has been creating the finest scopes that are used by professionals, hunters, and competitors.
  • NightForce also provides a wide range of high-quality optics accessories.
Check Stock

HIRAM Cantilever Scope Ring Mount for 1' and 30mm Rifle Scopes with 2 Slot Raised Picatinny Rail Mounts, Adjustable Cantilever Mount

  • FITS 1-INCH & 30MM SCOPES: This dual ring mount by Hiram fits pistol and rifle scopes with 30mm diameter tubes but includes gaskets to securely handle 1-inch scopes as well.
  • the cantilever design allows scopes to be placed up to 2 inches forward for better eye relief and a fuller field of view.
  • ROCK-SOLID BUILD: Our aircraft-grade 6061-T6 aluminum alloy offers superior strength and corrosion resistance while remaining a lightweight 11 ounces.
  • the heat-treated torx screws lock this mount firmly into any 20mm Picatinny or Weaver rail.
  • RINGTOP MOUNTS: The rings on this cantilever scope mount each include a 2 slot 20mm rail to easily attach additional targeting accessories like lasers, tactical flashlights, and red dots.
  • HIGHLY ADJUSTABLE: This rifle scope mount's rings can also be adjusted forward or backward to any of seven 10mm (0.4") increments to fit all your favorite rifle scopes for hunting, shooting, tactical training, and more.
  • SATISFACTION GUARANTEED: Our scope mount has been rigorously tested to ensure its effectiveness and provide the highest-quality firearm accessory on the market.
  • we back it with our usual strong warranty and friendly 24/7 customer service so you can be sure you'll enjoy its use for years to come!.
Check Stock

Monstrum Extended Series Offset Picatinny Scope Mount | 30 mm Diameter | 0 MOA | Black

  • Built specifically for long range scopes - 6-24x magnification scopes and above - with 3 inches of spacing between scope rings to accommodate scopes with longer dimensions and larger adjustment housing.
  • Lightweight one-piece scope mount for mounting standard 30 mm diameter tube rifle scopes - with weight comparable to a set of lightweight rings, while providing the added rigidity and convenience of a one piece mount.
  • Mounts to any flat top Picatinny rail equipped rifle with custom Picatinny locking bolts that slot seamlessly into your Picatnny rail with zero wiggle - guaranteed to hold zero against the toughest of recoil.
  • Available in three styles - a 0 MOA mount for zeroing your scope at short to mid range distances, a 20 MOA mount for zeroing your scope at longer distances, and a 30 MOA mount for serious long distance shooters..
  • Mount frame crafted from lightweight 6061 grade aluminum with hardened steel Torx mounting hardware to prevent stripping of the bolts.
Check Stock

Monstrum Extended Series Offset Picatinny Scope Mount | 30 mm Diameter | 20 MOA | Black

  • Built specifically for long range scopes – 6-24x magnification scopes and above – with 3 inches of spacing between scope rings to accommodate scopes with longer dimensions and larger adjustment housing.
  • Lightweight one-piece scope mount for mounting standard 30 mm diameter tube rifle scopes – with weight comparable to a set of lightweight rings, while providing the added rigidity and convenience of a one piece mount.
  • Mounts to any flat top Picatinny rail equipped rifle with custom Picatinny locking bolts that slot seamlessly into your Picatnny rail with zero wiggle – guaranteed to hold zero against the toughest of recoil.
  • Available in three styles – a 0 MOA mount for zeroing your scope at short to mid range distances, a 20 MOA mount for zeroing your scope at longer distances, and a 30 MOA mount for serious long distance shooters..
  • Mount frame crafted from lightweight 6061 grade aluminum with hardened steel Torx mounting hardware to prevent stripping of the bolts.
Check Stock

Evike Airsoft - Swiss Arms Licensed Full Auto Select Fire 226 Airsoft AEP Hand Gun Package Color Black

  • ◙ NOT a part or component. NOT for real weapons. Optics (Scopes/Red Dots in images) NOT included unless stated clearly. Battery and Charger may not....
  • Metal slide and polymer frame , is easily upgradeable with Tokyo Marui spec gearbox internal components.
  • Heavy weight robust construction with Metal slide, magazine, selectors, mag well, inner barrel.
  • Precision bore inner barrel and high performance motor..
Check Stock

BURRIS FullField II 6.5-20x50 Scope, Ballistic Mil-Dot Reticle, Matte Black (200193)

  • Popular and premium traditional hunting scope at an affordable price.
  • High-grade optical glass provides excellent brightness and clarity with lasting durability.
  • Quality, precision-ground lenses are larger than those of comparable scopes, for better light transmission.
  • Index-matched, Hi-Lume multicoating aids in low-light performance and glare elimination, increasing your success rate.
  • Durable, integrated-eyepiece design has no-slip grip for easy adjustment in the field.
  • Positive steel-on-steel adjustments assure repeated accuracy.
  • Durable, stress-free, solid 1-piece outer tube withstands shock and vibrations of even the heaviest recoil.
  • Covered by the Burris Forever Warranty. We will repair or replace your Burris optic if it is damaged or defective. Warranty does not cover loss, theft, deliberate damage or cosmetic damage that does not hinder the performance of the product.
Check Stock

Monstrum Low Profile Picatinny Riser Mount (0.5' H x 5.7' L), for Scopes and Optics

  • Low profile 0.5 inch high riser mount for scopes and optics, allows for sight clearance over front sights.
  • 5.7 inches in length with 14 Picatinny rail slots, Picatinny rail mount will accommodate all Picatinny or Weaver standard scopes, red dots, and optics.
  • Sturdy and lightweight, 5 ounces in weight, crafted from aircraft grade aluminum.
Check Stock