ReviewsHigh precision Motor Driver

DEWALT 20V MAX* XR Impact Driver Kit, Brushless, 3-Speed, 1/4-Inch, 2.0-Ah (DCF887D2), Pack of 1

  • More runtime and capacity over standard units delivered by DEWALT-built brushless motor and lithium ion batteries of DEWALT impact driver.
  • The cordless impact driver has an optimized application versatility with 3-speed settings.
  • Added control for precise applications with Precision Drive in speed 1 for precision applications and added control.
  • Visibility without shadows from 3 LEDs with 20-second delay after trigger release.
  • One-handed loading 1/4-inch hex chuck with easy grip sleeve, accepts 1-inch bit tips.
  • Fit into tight areas with the compact and lightweight design.
Check Stock

DEWALT 20V MAX* XR Cordless Drill Combo Kit Brushless 5-Tool DCK594P2

  • DCD996 in cordless drill combo kit has a DEWALT-built high power, high efficiency brushless motor that delivers up to 75% more runtime vs. 18V NiCad....
  • DCD996 has a heavy-duty 1/2-inch ratcheting nitro-carburized metal chuck with carbide inserts for superior bit gripping strength of the cordless tools....
  • DCF887 has a DEWALT built brushless motor for longer run time of drill/ impact driver combo kit.
  • DCF887 has 3-speed settings for versatility with Precision Drive for added control.
  • DCS570 uses a 7-1/4-inch blade to provide 2-9/16-inch Cutting Capacity at 90 degrees.
Check Stock

MEGA 2560 Starter Kit Ultra (100% Arduino IDE Compatible) w/ Battery Holder, Sensors, Modules, Resistor kit and Components (no Supply)

  • ...r of components) -Shield for prototypes + Mini-Breadboard -Large Breadboard (830 points ) -Dupont Cables 10 * Female-Female + 10 * Male-Female + 10 Male-Male -Cable Jumper for breadboard -6 Push Buttons with multicolored caps -Joystick Module type PS2.
  • -RC-522 RFID Module with white RFID Card and RFID Keychain -High-precision RTC Real-Time Clock Module DS3231 and EEPROM AT24C32 -PIR Presence Sensor HC-SR501 -Distance measurement module HCSR04 -Sound sensor detector module with programmable threshold -LM35 temperature sensor -Tilt detector module -Servo SG90 motor -Stepper motor (5V) -Motor driver module for stepper motor ULN2003.
  • 5V Active Buzzer -5V Passive Buzzer -LCD 1602 16 characters * 2 lines -LED Display Driver MAX7219 -LED Matrix Display of 8*8 -7 Segments Display 1 digit -7 Segments Display 4 digits -Simple Relay Module - Infrared Remote Control 38kHz - 38kHz Infrared decoder receiver (type 1838) - Infrared phototransistor (Flame sensor) - Infrared LED - Light sensor (Photoresistor).
  • -10 * LEDs 5mm Diffused RED -10 * LEDs 5mm Diffused GREEN -10 * LEDs 5mm Diffused YELLOW -5 * LEDs 5mm Ultrabright WHITE diffused -3 * LEDs 5mm Red / Green / Blue Diffused RGB -Shift Register (Series to Parallel IC) 74HC595 - NPN Transistor BC547 - PNP Transistor B....
Check Stock

Bosch PS31-2A-RT 12V Max Lithium-Ion 3/8 in Cordless Drill Driver Kit 2 Ah Renewed

  • Effective drill/driver design – has pro power in a 3/8 In. drill/driver at only 1.8 Lbs. (tool only, not including battery).
  • Professional motor – delivers 265 In.-Lbs. of torque and a max speed of 1,300 rpm for real performance.
  • Compact housing – features a head length of only 7.0 In. and a weight of only 1.8 Lbs. (tool only, not including battery).
  • Two-speed transmission – provides a high-power setting at 0-350 rpm and a high-speed setting at 1,300 rpm.
  • Precision 20+1 clutch settings – allows for accurate torque settings for less fastener damage.
Check Stock

ORIA Precision Screwdriver Set, 86 in 1 with 57 Bits Repair Tool Kit, Portable Bag for Cellphone, Game Console, Tablet and Other Devices, Blue

  • Give your wrist a break! Some electronic devices and assemblies have many screws holding them together making repairs and takedowns with a manual driver a tiring task. Enter the cordless electric precision screwdriver..
  • This tool pairs perfectly with your favorite 4mm iFixit precision driver kit to make complex assemblies like computer builds quick and easy..
  • Durable ABS construction. Requires 2 x AAA batteries (not included). LEDs illuminate your work. Electric motor torque: 0.15 NM. Manual torque: 1.0 NM..
  • Tips: Apply slight pressure to the top of the driver while in use. For extra tight screws, start unscrewing manually before activating the power..
Check Stock

DEWALT ATOMIC 20V MAX* Impact Driver, Cordless, Compact Kit, 2 Batteries, 1/4-Inch (DCF809C2)

  • Only 5.1-inch in length of DEWALT impact driver is designed to fit in tight spaces.
  • 1700 in-lbs of torque of the cordless impact driver delivering the power you need to get a majority of applications done.
  • Variable speed trigger of DEWALT 20V 1/4 impact driver allows for control and precision on delicate work surfaces.
  • DEWALT built brushless motor for efficient performance and runtime.
Check Stock

DEWALT 20V MAX* XR Impact Driver Kit, Brushless, 3-Speed, 1/4-Inch, 4.0-Ah (DCF887M2)

  • DEWALT built brushless motor and XR Li-Ion batteries of DEWALT impact driver deliver more run time and capacity over standard units.
  • The cordless impact driver has 3-speed settings for optimized application versatility.
  • Precision drive in speed 1 for precision applications and added control.
  • 3 LEDs with 20-second delay after trigger release, provide visibility without shadows.
  • One-handed loading 1/4-inch hex chuck with easy grip sleeve, accepts 1-inch bit tips.
  • Compact and lightweight design to fit into tight areas (6 mm shorter than the previous DCF886).
Check Stock

TIMPANO TPT-D3200TI-ND 2″ Exit Neodymium Titanium Compression Driver for High Output, Frequency Response from 1,600 to 19,000 Hz

  • Power You Can Rely On: The high energy motor is also response for output up to 110 dB with only one watt of input power.
  • New Technology: A neodymium motor focuses magnet flux into the gap while keeping driver weight below 3.92 pounds.
  • Designed for Efficiency: Compression horn driver uses a neodymium ring motor design to pack as much BL product into the voice coil gap as possible.
  • Solid Structure: When combined with the titanium dome diaphragm, to produce crisp sound over a broad range (from 1,200 to 18,000 Hz) with an emphasis on the critical mid range high range.
  • Quality You Can Trust: Choose Timpano’s D3200TI-ND titanium compression driver for a high output compression driver to be used for the critical mid range high (vocals).
Check Stock

DEWALT ATOMIC 20V MAX* Impact Driver Kit (DCF809C1)

  • Only 5.1-inch in length of DEWALT impact driver is designed to fit in tight spaces.
  • 1700 in-lbs of torque of the cordless impact driver delivering the power you need to get a majority of applications done.
  • Variable speed trigger allows for control and precision on delicate work surfaces.
  • DEWALT built brushless motor for efficient performance and runtime.
Check Stock

HiLetgo L298P DC Motor Drive Module L298P DC Motor Drive Shield H-Bridge Drive Expansion Board High-Power DC Stepper Motor Controller for Arduino

  • Driven part of the input voltage VS: VIN Input 6.5 ~ 12V, PWRIN 4.8 ~ 35V input..
  • The L298P shield DC motor driver has PWM speed control mode.
  • Adopt dedicated high-power motor driver chip L298P which can directly drive two DC motors with drive current up to 2A..
  • Stack design can be directly plugged into the Arduino, easier to use..
Check Stock

4 Axis CNC Nema23 Stepper Motor Dual Shaft 425oz-in 3A+FMD2740C Driver 40V 4A+400W 36V Power Supply+USB CNC Breakut Board Controller Kit For CNC Router

  • ♞【Product】4 Axis nema23 stepper motor driver usbcnc controller kit.
  • Wirings: "A+"=Red / "A-"=Green / "B+"=Yellow / "B-"=Blue.
  • ♞【Driver】FMD2740C driver Voltage: DC12-50V.
  • Current: rated maximum output reaches: 4A.
  • Subdivision precision 2 8 16 32 64 128 10 20 optional.
  • ♞【4 Axis USBCNC Breakout Board】USB port,only support USB CNC Software,not fit for Mach3 software.Our parcel include a CD,it include the user manual and USBCNC software.
  • ♞【400W 36V 11A DC Switching power supply】Please flip the side input voltage selector switch,Input: AC110V-120V or AC220V-240V.
  • 【Computer system 】Support Win XP/7/8/10,if you can not get the activation code on Win 10,pls let us know,we will help you to solve it..
Check Stock