ReviewsHigh pressure Fittings

HaSaoMoi Air Brake Line Fitting, DOT Brass Push in Fitting, Push to Connect Union Fittings Air Brake Union 1/4" Tube OD for Trucks Trailers andIndustrial Use (4 Pack)

【PREMIUM MATERIAL】：Our push in fittings are made of high quality CA360 brass,Certified by DOT and Air Brake system Requirements,with corrosion resistance, high temperature ductility and low permeability. Great for long time use, dot air brake fitting pneumatic fittings type: 1/4".
【TYPICAL APPLICATION】：The air brake fittings assortment kit can be used with air systems, copper tubing in air lines brake systems, which is perfect for automotive car or truck repair,air operated seats, operating gauges, air horns, heater controls, industrial workshops, daily garden or lawn mower repair, towing machine hose connection and air brake connections ..
【EASY TO BE INSTALLED】: Union connect two tube with same OD. All quick connect fittings can be sealed by pushing the tube firmly into the fittings and they are also simple to be removed from the tube..
【MAX PRESSURE】: Working pressure from vacuum to 250 psi. Temperature Range: -40° F to +200° F（-40°C to +93°C）(Note: see tubing manufacturer’s recommendations for pressure and temperature mutations).

Check Stock

Mr. Gasket - 9710 Fuel Press Regultr W/Hdwr, Chrome

Fits 5/16 inch and 3/8 inch inside diameter fuel line.
Not for fuel injected systems, Max inlet pressure 9 PSI.
Adjusts fuel pressure from 1 to 6 pounds.

Check Stock

JIFETOR Fuel Injection Pump Pressure Tester Gauge Kit, Car Gasoline Gas Fuel Oil Injector Test Manometer Tool Set 0-100PSI, Universal for Auto Truck SUV Motorcycle ATV RV

...gh pressure injection pump or high pressure fuel track on direct-injection engine, due to the fuel gauge's low pressure range. Test fuel pressure is an essential part of the troubleshooting process of fuel injection system..
3 CONNECTION TYPES FOR TU-113 FUEL PRESSURE GAUGE TOOL KIT: The set is equipped with various fittings and hoses to connect for testing. 14"L hose is used for hooking up directly to the 1/4" SAE standard Schrader valve on fuel pump, 11"L hose for the small Schrader valve (for some Ford), and 8"L hose for M6 fuel pressure test port. 1/4" barbed brass fittings is direct for special test outlet on engine, and aluminum tee splices in-line between the fuel pump and engine for most vehicles..
PRIMARY FUEL PRESSURE TEST KIT: Pressure gauge adopts rubber cover protected 2-3/4" large dial with 0-100psi/0-7bar range and dual color coded scale for easy reading. The hoses use rubber nylon resin material, and the build-in nylon can strengthen the hose with increased stress resistance. Please note, there is no pressure relief valve and drain hose, please wrap cloth around hose connection before relieving pressure from fuel line and removing testing components..
CHECK FUEL INJECTOR PUMP PRESSURE: The pressure gauge is designed for checking the fuel....

Check Stock

Utah Pneumatic Push To Connect Air Line Fittings 1/4'Od Union Straight Tube Connector Air Fittings Quick Connect Push Lock Fittings Air Bag Fittings Pneumatic Tube Fittings Plated Brass Push (5 Pack)

SPECIFICATION: Acceptable Fluid : Air And Water Pressure Range: Max Working Pressure: 2mpa | 290psi/ Working Temperature:-20°C—120°C | -4°F—248°F Applicable Tube: PU/NYLON/Soft PE Hose Push Connect Air Fittings Push Fitting.
Installation : push to connect fittings can be done within a short period of time. This tube connector is available in various styles and models Each model to serve its purpose All models of push in connector are designed to suit your pneumatic piping needs perfectly.
Thinking of changing the tube direction after installation ? .Be relaxed . You can easily change the tubing connector direction even after installation. The release ring conforms with the ellipse design to ensure that the disconnecting unit is in good shape.
It's important to note the taper threads on each fitting are properly coated with Teflon for optimal performance of the entire plumbing system.All push to fit, contains internal hexagonal holes.
this enhances the installation of the push connect fittings process in a narrow space.
These Push In Fittings Meet The Pressures And Temperatures Mentioned. Our Connect Push Brass Is More Resistant To High Temperatures We Are Ready To Serve You And Answer Any Questions Related To Our Straight Air We Are Committed To....

Check Stock

Universal 1/8'' NPT Male Thread to 8MM Female Quick-Disconnect Connector Adapter, Black Zinc Plated Copper, PCP Paintball Charging Fittings with Sealing O-Ring

Material - Made of high-quality black zinc plated copper, Size: 31mm / 1.22 inch Length, Rated to 4000 PSI, Max Pressure: 6000 PSI, Temperature Resistance: 1000 ℃..
Accuracy - NC machining, accurately, suitable for 8mm Female converter and 1/8" NPT female thread, supplied with sealing ring washer, reliable and no leakage..
Easy to Operation - Simply connect each fill adapter to the quick disconnect air tool fittings, high pressure resistance，this is one of the needed items to have in your parts kit..
Quick Connect Adapter - Quick disconnect a male to female thread air tool fittings, will allow you to move air from one tank to paintball, to move air in a big bottle to a smaller more portable bottle, or connect to air tanks when used with two fill adapters..
Application - Inflatable cylinder fittings connect to high pressure hose, compatible with PCP airsoft, air gun, paintball, paintball tanks and SCBA tanks filling etc..

Check Stock

Charlotte Pipe 3' Cap Bushing Pipe Fitting - Socket Schedule 40 White PVC Highly Durable, Easy to Install, High Tensile and Sound Deadening for Home or Industrial Use (Single Unit)

PVC SCHEDULE 40: Fittings are for pressure applications have high impact strength and are intended for systems that will not exceed 140° F..
EASY INSTALLATION: White fittings that are used in potable water applications only. They are non-toxic, lightweight and easy to install. Installation requires the use of primer and solvent cement..
KEY FEATURES: They are highly resilient, with high-tensile and high-impact strength. PVC Schedule 40 has better sound deadening qualities than PVC Schedule 40 DWV Foam Core and ABS Foam Core..
CHARLOTTE PIPE PVC: Pipe and Pressure Fittings are used in irrigation, underground sprinkler systems, swim pools, outdoor applications and cold water supply lines.
MADE IN THE USA: For over a century, Charlotte Pipe has been manufacturing pipe and fittings, employing more than 1,400 loyal, hard-working Americans. All of our products are proudly made in the USA..

Check Stock

ROYPOWER Pressure Washer Adapter Set, M22-14mm Male Fitting to M22-14mm Male Swivel, 5000PSI Pressure Washer Hose Thread Kit

PRACTICAL AND CONVENIENT — Both ends of this pressure washer fittings are M22 14mm male thread, which can help you connect your high-pressure cleaning hose with M22 14mm female connector to any power washer equipment with M22 14mm female connector!.
UPGRADED REMOVABLE SHELL — The handle of this m22 14mm to 14mm pressure washer swivel kit is made of rubber, which can prevent scratching your fingers, increase the friction between fingers and fittings, help you rotate the pressure washer hose adapter to hoses more easily!.
HIGH QUALITY BRASS — This pressure washer hose connector set is made of high quality brass, connected with each part firmly. At the same time, it has corrosion resistance. It is the best choice for both environmental protection and practicality!.
EXCELLENT PERFORMANCE — The maximum working pressure of this pressure washer coupler kit is up to 5000PSI, greatly increase your work efficiency!.
WIDELY COMPATIBLE — Our power washer m22 fitting is compatible with most pressure washer machines and power washer hoses on the market, such as Simpson and PowerStroke. However, it is not compatible with equipment using M22 15mm thread..

Check Stock

Pipe Décor 1½ in. x 6 in. Black Steel Pipe, Pre-Cut, Industrial Steel Grey Fits Standard 1½ Inch Black Threaded Pipes, Nipples and Fittings, 6 Pack

PVC SCHEDULE 80: Pipe and Fittings are for pressure applications have high impact strength and are intended for systems that will not exceed 140° F..
MADE IN THE USA: For over a century, Ventral has been fabricating pipe and fittings, employing more than loyal, hard-working Americans. All of our products are proudly made and/or designed in the USA..
KEY FEATURES: They are highly resilient, with high-tensile and high-impact strength. PVC Schedule 80 has better sound deadening qualities than PVC Schedule 40 DWV Foam Core and ABS Foam Core..
EASY INSTALLATION: White fittings that are used in potable water applications only. They are non-toxic, lightweight and easy to install. Installation requires the use of primer and solvent cement..
VENTRAL PVC: Pipe and Pressure Fittings are used in irrigation, underground sprinkler systems, swim pools and spas, outdoor applications and cold water supply lines.

Check Stock

3/8 Air Fittings Push to Connect Fittings,CEKER 3/8 Inch Tubing Od x 3/8\ NPT Thread Male Pneumatic Fittings Air Line Fittings Quick Connect Push in Connectors 5Packs

Type:3/8" Od x 3/8" NPT Male Push to Connect Fittings.
3/8 inch Tube Air Fittings Fluid Admitted: Air, Water (No Freezing).
3/8 Quick Connect Fittings Working Pressure:0-1.0mpa | 0-150psi.
3/8" od tube Pneumatic Fittings Applicable: Pipe PU/ PA/ PE/ PVC.
Working Temperature: 0-60°C | 32～140°F.
Push to connect air fittings 3/8 is made of Nickel Plated Brass and quality plastic- corrosion resistance, ductility.

Check Stock

CEKER 1/4 Tube Fitting Push Connect Pneumatic Fitting,PC 1/2\ Tube Od x 1/4\ NPT Thread Male Straight Union Air Fittings Push in Fitting Quick Release Pneumatic Connectors 2Pack

Type:1/2" Od x 1/4" NPT Male Push to Connect Fittings.
1/4 inch Air Fittings Fluid Admitted: Air, Water (No Freezing).
1/4 Quick Connect fittings Working Pressure:0-1.0mpa | 0-150psi.
1/2" od tubing Pneumatic Fittings Applicable: Pipe PU/ PA/ PE/ PVC.
Working Temperature: 0-60°C | 32～140°F.
1/4 Push to connect air fittings is made of Nickel Plated Brass and quality plastic- corrosion resistance, ductility.

Check Stock

DOT Brass Air Line Quick Connect Fittings Assortment, 34 Pcs DOT Push to Connect Air fittings 1/4" 3/8" 1/2" Air Fitting Kit with 1/4" Schrader Valve Air Line Fittings for Trucks or Industrial

【PREMIUM MATERIAL】：Our dot push to connect air fittings are made of high quality CA360 brass, meet D.O.T. FMVSS 571.106, SAE J1131 with corrosion resistance, high temperature ductility and low permeability. Long service time, air brake fitting assortment type: 1/4", 3/8", 1/2"..
【TYPICAL APPLICATION】：The dot air line quick connect fittings can be used with air suspension systems, copper tubing in air lines brake systems, perfect for truck /RV repair air line leak, also perfect for industrial workshops, daily garden or lawn mower repair, towing machine hose connection and so on..
【EASY TO INSTALL】：Pre applied red sealant for male thread for better sealing. All brass quick connect air fittings can be sealed by pushing the tube firmly into the fittings, simply depress button to remove tubing..
【MAX PRESSURE】：Working pressure from vacuum to 250 psi. Temperature Range: -40° F to +200° F（-40°C to +93°C）(Note: see tubing manufacturer's recommendations for pressure and temperature mutations).
【ALL IN ONE SET】: Unique DOT Air Brake fit....

Check Stock