ReviewsHigh pressure Fluid

PURAP Clinical Cushion for Pressure Relief – Patented Fluid 3D Flotation – Helps Bedsore Prevention & Treatment – for Wheelchairs Recliners Lift Chairs & Dialysis Chairs – 18 x 20 x 1.5 inches

  • PATENTED PRESSURE RELIEF TECHNOLOGY – Our proprietary fluid 3D Flotation technology was developed in Silicon Valley, California, clinically tested at Stanford University Hospital, and has published clinical data..
  • HELPS REDUCE PAIN AND PREVENT, HEAL PRESSURE SORES – PURAP helps prevent formation of high-pressure point ‘hotspots’ that cause sitting pain and create bedsores on buttocks..
  • OUTPERFORMS GEL AND MEMORY FOAM CUSHIONS – PURAP's fluid technology does not “pack down” into a hard “brick”, does not increase pressures on your body over time by trying to get back to its original shape, and is therefore more effective at dissipating pressures than foam or gel cushions..
  • FLEXIBLE AND CONFORMS TO YOUR BODY SHAPE – PURAP cushion is flexible. Instead of having a pre-contoured shape, which fits only one body shape, the PURAP cushion’s fluid technology conforms and fits to your body shape to provide full 3D support..
  • THIN CUSHION – PURAP cushion is 1.5” thick, and its patented technology supports your body without bottoming out. Unlike the other thick (3”-4”) bulky cushions, PURAP allows you to place and sit comfortably on any seating surface without any wobbliness..
Check Stock

CARBO Instruments Stainless Steel Pressure Gauge Dual Display -30 Hg - 0-60 psi/kPa - 2 1-2 Glycerine Liquid Filled Water Air Oil Gas Gauge with Polycarbonate Lens - Compound Vacuum - 1/4 NPT

  • Easily identify pressure fluctuations with CARBO Instruments pressure gauge. Use our liquid-filled, high-performance psi pressure gauge to monitor fluid, gases, oil and air leaks and buildup of pressure in a system..
  • Built to last construction: The case of our heavy duty pressure gauge is made of stainless steel with wetted parts of brass and copper alloy. The lens is made of polycarbonate, making it hard to break and scratch resistant.
  • Liquid filled for better performance: Our liquid filled pressure gauge can stand up to shock and vibrations because the internal fluid dampens system pulsation, the gauge can better absorb vibration and pressure spikes..
  • Convenient & user-friendly: Large dial allows easy reading of pressure. The compact design of our stainless steel pressure gauge is easy to carry and portable..
  • Wide application: Our stainless steel pressure gauge can be used to measure water pressure, air pressure, hydraulic pressure and oil pressure. Ideal for pumps, compressors, hydraulic presses, pneumatic equipment and for planning and designing an irrigation system..
Check Stock

CARBO Instruments Stainless Steel Pressure Gauge Dual Display (0-5000 psi/kPa) - 2 1-2' Glycerine Liquid Filled Water Air Oil Gas Gauge with Polycarbonate Lens & Brass Connection -1/4' NPT Lower Mount

  • Easily identify pressure fluctuations with CARBO Instruments pressure gauge. Use our liquid-filled, high-performance psi pressure gauge to monitor fluid, gases, oil and air leaks and buildup of pressure in a system..
  • Built to last construction: The case of our heavy duty pressure gauge is made of stainless steel with wetted parts of brass and copper alloy. The lens is made of polycarbonate, making it hard to break and scratch resistant.
  • Liquid filled for better performance: Our liquid filled pressure gauge can stand up to shock and vibrations because the internal fluid dampens system pulsation, the gauge can better absorb vibration and pressure spikes..
  • Convenient & user-friendly: Large dial allows easy reading of pressure. The compact design of our stainless steel pressure gauge is easy to carry and portable..
  • Wide application: Our stainless steel pressure gauge can be used to measure water pressure, air pressure, hydraulic pressure and oil pressure. Ideal for pumps, compressors, hydraulic presses, pneumatic equipment and for planning and designing an irrigation system..
Check Stock

Mityvac MV6412 ATF Pneumatic Refill System; Air Operated, Services Sealed Automatic Transmissions with up to 2.5 Gallons of Fluid; Includes Quick-Change Style Accessory Connections

  • EASY OPERATION: Transmission Fluid is dispensed under pressure by pressurizing the reservoir with the built in hand pump for smooth continual flow. ON/OFF and flow control valve are conveniently located near fluid output..
  • ACCESSORIES: Includes ten (10) adapters to connect to Ford, Toyota, BMW, Honda, Nissan, VW, Audi, Mercedes and Volvo transmissions..
  • PRESSURE GAUGE: Integrated Pressure gauge indicates fluid dispensing pressure..
  • NO TOOLS NEEDED: The MV6412 utilizes push-to-connect, quick-change style accessory connections..
  • SOLID CONSTRUCTION: Internal pump components are sealed against exposure to fluids. This ATF refill system includes a custom-molded storage case for easy and safe storage of adapters..
Check Stock

Lettre d un Rabbin Converti aux Israélites Ses Frères sur les Motifs de Sa Conversion Classic Reprint

  • ☞Built in Pressure Monitoring System☞The pump for filling the brake fluid reservoir is equipped with a pressure monitoring device. You can adjust....
  • ☞Optimize Advantages☞Compared with the traditional compression brake fluid bleeding device, the pulsating electric brake oil exchanger can....
  • ☞Widely Usage☞Autool AST 605 is suitable for European, American and Asian car brake fluid tanks, it almost can apply for all vehicles. This....
  • ☞High Efficiency☞Our main bleed kit requires only one person to operate and allows you to easily to use and change the brake oil. It can change....
  • ☞Don’t Worry☞ Ship from American warehouse, then you can receive it around 7 working days.. For damage caused by non-human factors, AUTOOL....
Check Stock

Mityvac MV7840 Pressure Brake Bleed Kit for Pressure Bleeding Hydraulic Brake and Clutch Systems Includes 2.5 Quart/2.5 Liter Capacity Reservoir Flex Hose and Master Cylinder Adapter Kit

  • Utilizes compressed shop air to produce pressure for dispensing and vacuum for extracting fluids..
  • Pushes new fluid down through the master cylinder to flush air and old fluid out through the bleed screws.
  • Redundant pressure control systems safely maintain peak output pressure below 30 psi (2 bar).
  • Isolated flow control and pressure/vacuum switch valves provide simple functionality control.
  • The ON/OFF and flow control valve are conveniently located near fluid output..
Check Stock

Lubeworks Oil Transfer Drum Pump Double Action 1:1 Fast High Flow Rate 8.5GPM / 32LPM for SAE130 Oils/Fluids

  • SPECIFICATIONS - This Air Operated (Pneumatic) Double Action Oil Transfer Pump has a High Flow rate of a Max 8.5GPM / 32LPM.
  • A Max Air Inlet Pressure of 5-8BAR / 70-115PSI.
  • A Max Fluid Pressure of 8BAR / 115PSI. An Air Motor Effective Diameter of 63mm 2.5" inch.
  • An Air Consumption (per minute) @ 8BAR / 130L @ 115PSI / 4.7CFM.
  • An Air Inlet Connection of 1/4" and Oil Outlet Connection of 3/4" Male.
  • A Long Pump Life of 960k Liters / 253k+ Gallons.
  • EFFICIENT DESIGN and CAPABILITIES - Our Transfer Pumps are Double Action and Self Priming designed, delivering fast and precise flow rates.
  • This Smart design uses fewer parts for less pump wear/tear, making it is easy to use/maintain This pump is best suited for Multiple Fluid types of medium to high viscosity at a short to medium distance, typical fluids handled include: motor oil, synthetic oil hydraulic, gear oil, automatic transmission fluid and suitable up to SAE80 grade oil.
  • PROPER USE & SAFETY - All our pumps come with a 2" inch Adjustable Bung adapter, for easy installation for barrel mounted applications.
  • This pump can be barrel, cart or wall-mounted.
  • A Wall Mount Kit or Extension Tube Kit are Sold SEPARATELY.
  • Follow manual for setup and always use the proper additional equi....
Check Stock

Lubeworks Oil Transfer Drum Pump Double Action 3:1 Fast Flow Rate 7.4gpm / 28lpm for SAE130 Oils/Fluids

  • PUMP SPECS - This Air Operated (Pneumatic) Double Action Oil Transfer Pump has a High Flow rate of a Max 7.4GPM / 28LPM.
  • A Max Air Inlet Pressure of 5-8BAR / 70-115PSI.
  • An Air Motor Effective Dia. of 63mm 2.5" inch.
  • An Air Consumption (per minute) at 8BAR / 140L at 115PSI / 5.0CFM.
  • Air Inlet Connection of 1/4" inch and Oil Outlet Connection of 3/4" inch Male.
  • A Long Pump Life of 840k Liters / 221k+ Gallons.
  • EFFICIENT DESIGN and CAPABILITIES - Our Transfer Pumps are Double Action and Self Priming designed, delivering fast and precise flow rates.
  • This Smart design uses fewer parts for less pump wear and tear, making it is easy to use and maintain.
  • This pump is best suited for Multiple Fluid types of medium to high viscosity at a short to medium distance, typical fluids handled include: motor oil, synthetic oil hydraulic, gear oil, automatic transmission fluid and suitable up to SAE130 grade oil.
  • PROPER USE and SAFETY - All our pumps come with a 2" inch Adjustable Bung adapter, for easy installation for barrel mounted applications.
  • This pump can be barrel, cart or wall mounted.
  • A Wall Mount Kit or Extension Tube Kit are Sold SEPARATELY.
  • Follow manual for setup and always use the proper add....
Check Stock

Mini HVLP Gravity Feed Air Spray Gun with Air Regulator 2.5mm Nozzle 20 Oz Aluminum Cup

  • The 2.5 mm Fluid Tip is Ideal for spray cars, machines, furniture, instruments, drawings, toys, crafts and small spots.
  • High speed spraying, perfect pulverization.
  • HVLP (High Volume Low Pressure) technology provides a higher transfer of materials while reducing bounceback and overspray.
  • Built-in 3 control knobs: Fluid control regulates amount of paint sprayed, Pattern control adjusts the fan pattern size, and air adjustment valve provides versatility to adjust air flow.
  • Lightweight, ergonomic design and easy trigger pivot reduce operating fatigue. Gravity feed design minimizes material waste.
Check Stock

Mini Automotive Paint Touch-Up HVLP Spray Gun with 1.2mm Fluid Tip and Regulator

  • TCP Global Brand High Performance Mini Detail HVLP Spray Gun with a 1.2 mm Fluid Tip, 150 cc Aluminum Cup and a Air Regulator.
  • Ideal to Use for Touching-Up Spots, Panel Repairs, Door Jambs, and Difficult to Reach Areas.
  • The 1.2 mm Fluid Tip Allows You to Spray Thicker Materials Like Primers and Other Medium to High Viscosity Coatings.
  • Spray Gun has Control Knobs for Full Adjustment over Spray Pattern, Fluid Control and Air Pressure.
Check Stock

YSTOOL 10L Pneumatic Fluid Extractor Dispenser Set ATF Refill Tool Kit for Changing Oil in Engine Transmission Differential Transfer Case Gear Gearbox Power Steering Coolant with Pump Assembly Tank

  • ...ery easy. Pneumatic tool, works with vacuum pump to extract and with air pump to refill, ensuring high efficient and labor-saving.
  • Pump assembly incorporates the container cover, the handle trigger with lock, 2-way control valves for conversing evacuate and dispense, safety valve for automatically releasing excessed pressure (above 43psi /3bar), 1/4" American style air inlet plug, pressure gauge (0-80psi/0-6bar) for monitoring the pressure change, quick coupler for connecting main hose. 10L big capacity well constructed container, is marked with accurate scale to help observe the amount of liquid. Stable base avoids dumping.
  • The main hose is 80" long, with a quick plug on one side to connect the container, and a quick coupler on the other side to connect the dipstick tubes or ATF adapters. There is a ball valve on the quick coupler to control the fluid flow, very convenient. Please note, there is no instruction in the kit, please refer to your vehicle operation instruction and following product description to operate. Your satisfaction and recognition are always what we pursue, please contact us to resolve any issue.
Check Stock