ReviewsHigh quality Lathe Tool

Threading & Tapping attachment-lathe tailstock die holder set MT3

Made of High Quality Tool Steel , this is a high quality product for your lathe machine.
Used for threading and tapping purpose on the lathe machine.
Die Holder Sizes 13/16", 1" & 1-1/2" . Tapping Capacity of the Tap Wrench : 1/16" to 1/4" & 1/4" to 1/2".
Comes in precisely ground MT3 Shank, that goes inisde your lathe tailstock & intended job for threading / tapping is hold in rotating chuck..
The Die for threading purpose is hold in the various Die holder sizes. The internal bore threading/ tapping is done by mounting the tap wrench head as....

Check Stock

Mophorn Metal Lathe 7 x 12 Inch, Precision Mini Metal Lathe 2250 RPM 400W Variable Speed, Mini Lathe Precision Bench Top Metal Working Lathe for Various Types of Metal Turning

Sturdy Iron Construction: The mini metal lathe bed is made of high-grade iron. Equipped with nylon gears, this lathe machine is wear-resistant, durable, and professional. Mini metal lathe power of motor: 400W. The full-length splashguard provides maximum protection..
Infinitely Variable Speed: Variable speed from 50-2250 RPM. Forward and reverse at all speeds. Operate either manually or with the adjustable auto feed rate. The hardness and accuracy of the slideways are obtained by raw material, heat hardening and grinding. The emergency stop button included..
Accurate 3-jaw Chuck: 3-jaw self-centering chuck for setting materials steadily. Backsplash guard included. The spindle is supported by precision tapered roller bearings, spindle accuracy within 0.01mm..
Professional Compound Rest: The mini metal lathe quick change tool post can achieve positions of internal cutting, face cutting, and bevel cutting by changing the tool post angle and adjusting the compound rest. The professional slide is designed with abrasive resistance, moving blades freely with a feed rod..
Wide Application: Home workshop-friendly size. Driven by the quality motor, this mini metal lathe cut off tool can be used in areas such as mini precision parts processing, sample processing, a....

Check Stock

Mophorn 7x12 Inch Luxury Version Metal Lathe 550W Precision Bench Top Mini Metal Milling Lathe Variable Speed 50-2500 RPM Nylon Gear with A Movable Lamp (7x12 inch)

Sturdy Iron Construction: The mini metal lathe bed is made of high grade iron. Equipped with nylon gears, this lathe machine is wear-resistant, durable, more accurate rotation and professional. Mini metal lathe power of motor: 550W. The full-length splashguard provides maximum protection.
Infinitely Variable Speeds: Variable speed from 50-2500 RPM. Forward and reverse in all speeds. Operate either manually or with the adjustable auto feed rate. The handness and accuracy of the v-slideways are obtained by raw material, heat hardening and grinding. Emergency stop buttom included.
Accurate 3-jaw Chuck: Mini metal lathe chuck, 3-jaw self-centering chuck, for setting cylindrical materials steadily. Backsplash guard included. Spindle is supported by precision tapered roller bearings, spindle accuracy within 0.01mm. A free lamp, 1x 4-Jaw Independent Chuck, 1x Quick Change Tool Post and 4x Engineers Measuring Kit are included.
Professional Compound Rest: The mini metal lathe quick change tool post can achieve positions of internal cutting, face cutting and bevel cutting by changing the tool post angle and adjusting the compound res....

Check Stock

Woodturning

Sturdy & Durable Construction: The mini lathe is made of high-quality HT200 cast iron, which stands up to tear and wear. It is equipped with an 850W motor that delivers a great deal of energy. If you are into making models, it would be your punctilious assistant..
Infinitely Variable Speeds: Revolving Speed Range: 50-2500. The mini lathe machine comes with variable speeds that give you the convenience to achieve the best work. This lathe allows you to work on both forward or reverse of any possible speed. The feeding rate can be adjusted manually or automatically. And an emergency button is accessible just in case..
Works with Precision: Spindle Bore: 1.5"/38 mm. The metal working lathe is pre-installed with a 3-jaw chuck, 4.9"/125 mm in diameter, that can clamp raw materials tight, and a backsplash guard that prevents metal filings..
Stable & Reliable Operation: Swing Over Bed: 8"/210 mm.
Swing Over Cross Slide: 32"/800 mm. The small metal lathe features a turret post for quick tool change and a center rest for tight pieces holding, making internal cutting, face cutting, and bevel cutting possible..
Wide Application: The lathe produces precision work without taking up a lot of room in your shop or garage, making bushings, spindles, prototypes, models, a....

Check Stock

Threading & Tapping attachment-lathe tailstock die holder set Machine Tools MT2

Made of High Quality Tool Steel , this is a high quality product for your lathe machine.
Used for threading and tapping purpose on the lathe machine.
Die Holder Sizes 13/16", 1" & 1-1/2" . Tapping Capacity of the Tap Wrench : 1/16" to 1/4" & 1/4" to 1/2".
The Die for threading purpose is hold in the various Die holder sizes. The internal bore threading/ tapping is done by mounting the tap wrench head as....
Comes in precisely ground MT2 Shank, , that goes inisde your lathe tailstock & intended job for threading / tapping is hold in rotating chuck..

Check Stock

Hurricane Turning Tools, HSS, 3 Piece Bowl Gouge Set (1/4\

【PRODUCTS INCLUDE】 - Lathe tools including(1)10.7"handle (2) 7.9"wood turning tools including square,round,diamond,square arcs(3)easy to replace the head of the T15 wrench,all parts are made of special hard sponge full fitted wrap,in the box..
【5 SECONDS QUICK DISASSEMBLY】 - No tools required,simply loosen the knurled chuck and insert the wood lathe tools,then screw on the collet and you can immediately go to work,the whole process takes five seconds.The wood turning tools for lathe screw self-locking collet fits snugly into the top thread,so you can experience visible robustness..
【HIGH CUTTING EFFICIENCY】 - Sharp high-density tungsten wood lathe cutting edge allows you to handle any wood lightly,and is more durable than other typical carbon and high-speed steel material wood turning tools.It is less likely to deform and stick during cutting,and if the cutting edge becomes dull,simply change the direction of the cutting edge with the included T15 wrench and you will have a fresh,clean cutting edge again..
【EASY TO CONTROL】 - Whether pure aluminum solid handle,or the tool bar of high-speed steel material,mirror polishing treatment to ensure that you can move on the frame without obstacles,square axis wood lathe tools and the tool frame c....

Check Stock

FJL FORCE Lathe Tools Set of 4, Mirror Polishing Wood Lathe Tools Latest Version Carbide Lathe Tools, Carbide Turning Tools, with Diamond Round Square Carbide Inserts

【PRODUTCS INCLUDE】 - Carbide lathe tools including:(1)11" handle(2)7.9" wood turning tools including square,round,diamond,rounded(3)easy to replace the cutting head of the T15 wrench,all parts are made of special hard sponge full fit wrapped and placed in a packaging box..
【REFUSE TO LOOSEN】 - Some common wooden handle carbide lathe tools will feel a certain degree of looseness or even fall off at the connection between the handle and the tool bar after 25 to 30 days of use.In contrast,the high-quality aluminum alloy handle,stainless steel handle all-metal material,double insurance carbide turning tools fixing structure can free you from the worry of product sturdiness in full..
【HIGH CUTTING EFFICIENCY】 - The sharp high-density tungsten lathe tools cutting edge allows you to confront the wood as if a hot knife cutting butter as simple and smooth,compared with other typical carbon and high-speed steel material cutting head more durable,if wood turning tools becomes dull,just use the included T15 wrench to change the blade direction,you will have a fresh,clean cutting edge again..
【EASY TO CONTROL】 - Whether it is the frosted aluminum handle of the wood lathe ,or the high- speed steel material of the knife shank,the mirror polished f....

Check Stock

HFS (R) Woodworking MT2 with 1-Inch Wood Lathe Drive Center

[Wide application]: Perfect for both wood and metal working Lathe. This turning tool is used on lathe with a lathe bored tailstock, will provide smooth wood turning support..
[Spring Loaded Point]: The spring under the center pin is very powerful..
[Specifications]: Compatible with headstocks with #2MT spindles.
[Advantages]: More teeth give a better bite while providing equal pressure and a positive drive..
[Material]: Made from high quality alloy steel, sturdy and durable..

Check Stock

Aloris Tool AXA-1S Oversized Turning and Facing Holder

OSCARBIDE 3/4" Heavy-Duty Lathe Turning tool set include 1pcs each of SCLCR,SCLCL,SDJCR,SDNCN,SWGCR external turning tools holder, 1 pcs MGEHR grooving tool holder, 1 pcs SER threading tool holder.
Turning lathes Holders are made of high quality steel with Nickel Cotated, inserts are made of carbide with Tin-coated, moistureproof, dust-proof,for long time use.
Used for semi-finishing/roughing steel,metal,Fit for Turning,grooving or threading.
Replacement cutter of this kit , please search the Asin of this item: B07R9ZXG5J on Amazon to buy it..
7pcs lathe cutting holders with 2pcs of keys packed in a premuim aluminium carrying case,easy to carry.

Check Stock

BestEquip Metal Lathe 7x14inch Precision Bench Top Mini Metal Lathe 550W Precision Metal Lathe Variable Speed 50-2500 RPM Nylon Gear with A Movable Lamp

Sturdy Iron Construction: The mini metal lathe bed is made of high grade iron. Equipped with nylon gears, this lathe machine is wear-resistant, durable, more accurate rotation and professional. Mini metal lathe power of motor: 550W. The full-length splashguard provides maximum protection..
Infinitely Variable Speeds: Power metal lathes has large center distance 350mm(13.78") and swing over bed:180mm (7.09"),spindle bore: 21mm(0.82"). Variable speed from 50-2500 RPM. Forward and reverse in all speeds. Operate either manually or with the adjustable auto feed rate. Emergency stop buttom included..
Accurate 3-Jaw Chuck: Mini metal lathe chuck, 3-jaw self-centering chuck, for setting cylindrical materials steadily. Backsplash guard included. Spindle is supported by precision tapered roller bearings, spindle accuracy within 0.01mm. A free lamp is included..
Professional Compound Rest: The mini metal lathe quick change tool post can achieve positions of internal cutting, face cutting and bevel cutting by changing the tool post angle and adjusting the compound rest. Professional cross slide is designed with abrasive resistance, moving blades freely with feed rod..
Wide Application: Driven by DC motor, this mini metal lathe cut off tool can be used in areas su....

Check Stock

Simple Woodturning Tools Carbide Lathe Turning Tool Set of 3 Full Size with 17 Foam Grip Handles USA Made

American Made Set of 3 Full Size Carbide Lathe Turning Tools with Color Coded Handles: Hollower, Detailer & Rougher.
17" long solid aluminum foam grip tool handles are color coded for easy tool identification. Overall tool & handle length is 26.5"..
This set of carbide lathe tools is ideal for turners at any skill level. With carbide it's all turning and no sharpening so you can begin turning....
Each lathe tool is 1/2" square CNC machined by Harrison Specialties in Ramsey, Minnesota. These tools are designed to be kept flat on the tool rest....
Each lathe tool features a carbide tip with multiple sharp edges that can be rotated several times. A Torx star wrench is included..

Check Stock