ReviewsHigh speed Anchor

CS Unitec EBM 352/3 PSV -14 in. Capacity Concrete Core Drilling Rig with Vacuum/Anchor Stand- Wet Diamond Core Drill -3-Speed For Concrete, Brick, Asphalt, & Stone -MADE IN GERMANY (w/vacuum pump)

  • Heavy-duty, light-weight core drill rig with combination vacuum/anchor stand - can be used as either a vacuum or an anchor stand- 14 in. diameter hole capacity -MADE IN GERMANY (vacuum pump included).
  • Powerful 20 amp, 110V motor for demanding use when wet drilling in reinforced concrete, stone, asphalt, marble, ceramic, walls, floors and more.
  • 3 speed gear box (230/500/1030 rpm load speed) concrete drill with oil bath gear box and mechanical safety clutch for optimal lubrication, reduced heat and increased user safety.
  • Only 77 lbs. (Rig & Motor) - Universal Tool Holder / Motor Slide Mount Allows for Easy Separate Mounting of Core Drill Vacuum/Anchor Stand from Drill Motor to Reduce User Fatique and Improve Hole Alignment (Motor Weight = 27.5lbs).
  • Machine integrated water supply with gardena style quick connect and adjustable valve for easy use with standard garden hose. GFCI over-current cut-off protection standard.
Check Stock

Anrik 1\\/4 inch x 2-1\\/4 inch - 20 Pieces Wedge Anchor Zinc Plated Heavy Duty Fastener for Concrete

  • Wedge anchor diameter: 1/4" | Length: 2-1/4" | Qty: 20 pieces. Our wedge anchor is made from high quality carbon steel, and is zinc plated to prevent rust.
  • Drill bit diameter/Hole diameter is the same as anchor diameter. Use a 1/4" drill bit to drill a hole in the base material (Concrete only).
  • The wedge anchor is a torque-controlled, wedge expansion anchor. The required installation torque of the anchor is 4 ft/lbs..
  • The concrete anchor is for heavy duty fastening applications where high pull out values in concrete are needed. It is for concrete only, not for block or brick base material.
  • The wedge anchor is used in fastening sheet metal, steel and aluminum angles, or wood to concrete. The wedge anchor is ideal for structural anchorage, storage racking anchorage, machinery and hand rails installation.
Check Stock

Five Oceans FO3931-C1 Pacific 600 Vertical Windlass 600W Kit w/Nylon Three Strand Rope/Chain and S.S. Swivel and Shackle (Rope 1/2\ x150FT w/Galvanized 1/4\ x15FT HT G4 Chain)

  • EQUIPMENT INCLUDES: Windlass Pacific 600 Vertical 600W, Solenoid, Rocker Switch, Circuit Breaker, Deck Foot Switch, Nylon Three Strand Windlass Rope 1/2"x150FT w/ Galvanized 1/4"x15FT HT G4 Chain and Stainless Steel Anchor Double Swivel.
  • POWERFUL 600 Watts MOTOR which provides a Maximum line speed 85 feet per minute and 1000 pounds of maximum pull..
  • SUITABLE FOR BOATS up to 32 feet in length as well as made from 100% 316 stainless steel. 1/2" (12 mm) rope and 1/4" (7 mm) HT G4 chain is the ideal size for the Atlantic 600 series.
  • WORKING LOAD ROPE/CHAIN SUGGESTED: Rope 1010 lb (460 kg) / Chain 1800 lb (825 kg).
  • ALL THAT'S MISSING from this kit is the right anchor for your boat and you'll have everything needed to anchor down and enjoy the open ocean. FIVE OCEANS, 40 YEARS developing High-Quality Marine & Outdoor Products.
Check Stock

VEVOR Boat Anchor Kit 8.5 lb Fluke Style Anchor, Hot Dipped Galvanized Steel Fluke Anchor, Marine Anchor with Anchor, Rope, Shackles, Chain for Boat Mooring on The Beach, Boats from 15'-24'

  • 8.5 Lbs Boat Anchor Kit: For smaller boats (15-24ft), our fluke anchor kit is a perfect plug-and-play kit. It includes an 8.5 lb fluke anchor, a 98 ft of 1/3'' rope, a 6.6 ft of 5/16" chain, and two pieces of shackles & swivels. No more worrying about buying the rope and chain. A complete boat anchor kit for your sailing..
  • Superb Holding Power: Our fluke anchor is well constructed to maintain high tensile and outstanding stability. When you drop it, it will dig into the bottom and hold it tightly. Even in high tide and windy weather conditions, our anchor can keep your boat stable..
  • Premium Quality: Our boat anchor and chain are built with hot-dipped galvanized steel for long-lasting performance even in saltwater. And anchors are different from most products on the market in that it is not welded directly. The welded junction of the plow anchor is thermoweld first and then welded again with the welding wire. This high-quality process effectively avoids cracks in the anchors. The 3-strand twisted and braided nylon rope is stretchy and wear-proof..
  • Quick Set Design: With a low center of gravity and the self-aligning geometry, this boating anchor ensures that it can set and rest quickly and adequately. The lead chain adds weight to the anchor's shank,....
Check Stock

BOSCH GCG18V-29N 18V Caulk and Adhesive Gun (Bare Tool)

  • POWERFUL 18V MOTOR: delivers a no-load max of 18 In. per minute feed and 790 Lbs. of push force, to push even high-viscosity adhesives, including anchor adhesives in concrete.
  • CORDLESS ADHESIVE GUN DESIGN: provides powered caulking to reduce the fatigue on your hand from manual caulk and adhesive guns.
  • NINE SPEED SETTINGS: allow for control with various types of materials and applications.
  • VARIABLE-SPEED TRIGGER: provides consistent bead size and easier application.
  • AUTO-REVERSE FEATURE: reverses plunger after the trigger is released to help prevent dripping and material overflow.
  • INCLUDES: 18V caulk and adhesive gun only.
Check Stock

Lewmar Galvanized Claw Anchor 22 Lbs/10kg for Boats 38 -44

  • TOP-PERFORMING ANCHOR— Our claw anchors have a one-piece design and easily sets in a variety of seabeds. This claw anchor also resets quickly giving....
  • BUILT TO LAST — This Lewmar claw anchor is made from a high-grade steel and galvanized for durability. They hold well in most bottom types and....
  • QUALITY DESIGN — The Lewmar galvanized claw anchor replicates the same design of the anchors used by the oil rigs in the North Sea. You can depend....
  • SIZED RIGHT —The galvanized claw anchor measures 14-13/16" W x 11-1/4"H x 21-1/4" L The anchor weighs 22 lbs. (40 kg). This anchor is for boats 30'....
  • TRUSTED BRAND — Our Lewmar 22 lb. claw anchor is made from the premiere equipment supplier- designing, manufacturing and distributing innovative,....
Check Stock

Mophorn Delta Style Boat Anchor Stainless Steel Boat Anchor Delta Style for Boats from 22-38 FT 17.00LBS Stainless Steel Delta Style

  • 316 Stainless Steel: Made of marine-grade 316 stainless steel, our delta type boat anchor is not prone to rust or be corroded. The surface is mirror....
  • High Tensile Strength: This triangular boat anchor is constructed to maintain high tensile strength and outstanding stability when you drop anchor.....
  • Strong Construction: Compared to other anchors, our delta boat anchor’s one-piece design provides superior holding power. Our products are different....
  • Quick Set Anchor: Lead-ballasted tip gives this delta fast-set anchor a low center of gravity geometry, enabling self-righting and makes sure that it....
  • Wide Application: Our stainless steel anchor’s versatile design is ideal for use in sand, mud, rock, coral, and other bottoms for boats from 22 ft....
Check Stock

Acelane Kayak Anchor 3.5lb Folding Grapnel Anchor Kit with 50ft Marine Anchor Line & Buoy for Kayak Fishing, Canoes, Jet Ski, SUP Board and Small Boat

  • 【Made for Adventures】Our Acelane Kayak Anchor Kit is designed with 3.5 lb 4-fluke folding well-balanced anchor, providing the perfect size and weight to keep your kayak or canoe stay floating in place, great anchoring helper for water adventures..
  • 【Excellent Corrosion Resistance】The anchor is made of rust resistant galvanized iron to ensure high performance in marine saltwater environment. The grapnel anchor improves holding strength to handle any kind of conditions whether it is sandy, weedy, muddy, or rocky..
  • 【All-in-One Set】Each anchor set includes an extra long 50ft double braid anchor rope (8mm thick) with loads up to 2200lbs. Also comes with an attached high visible PVC floating buoy and stainless steel snap hook to help you easily identify the anchor location and pull it back quickly..
  • 【Easy Operation】Simply lift the grappling anchor collar, fold open the 4 flukes, slide the collar back down to lock into place. Let go as much anchor rope as possible to create better horizontal drag power. Attach the anchor rope to the carabiner clip on the front of your board, kayak or Jet Ski, and done. Enjoy the flo....
Check Stock

BoltHold - SP58 Zinc-Plated Asphalt Anchor 1-1/4 x 10 - with 1.5 Hex Bolt & 2 Washer - Chemical Anchors - for Installation of Sheds Carports Bike Racks & More - 5000 lb Pull Rated - 6 PK

  • ZINC-PLATED ASPHALT ANCHORS: Stop wasting time pouring concrete! BoltHold's industrial in-ground anchors allow you to install anything on asphalt in three simple steps, offering a fast, cost-effective, and reliable solution to asphalt mounting. Measuring 10" long, these SP58 Zinc-Plated Steel Anchors incorporate a 5/8"-11 UNC (coarse) female thread and are pre-installed with a 1.5" long bolt and a 2" diameter washer. Set includes 6 anchors..
  • OUR STRONGEST ANCHOR: Pull rated for 5000 lb! Designed for a very heavy load, BoltHold SP58 chemical anchors resist at least 5,000 pounds pull and 2,500 pounds of high shear force at ground level. Rated for >720 in-lb rotary torque, the anchor's welded spiral offers a strong bond with the grout, while the washer at the top prevents the anchor from dropping below the surface or being pulled up into the mounting plate when tightening the bolt..
  • LONG TERM STABILITY: Creates a stress-free bond that lasts! Due to asphalt's weaker nature, typical expansion-type wedge anchors used in concrete won't hold to the pressure. BoltHold anchors solve this problem by embedding deep into the compacted gravel below the asphalt layer to increase the shear resistance and ensure long-lasting stability—perfect for safely installing....
Check Stock

Antsky T316 Stainless Steel (Marine Grade) Wedge Anchor Bolt (3/8\×3-1/2\

  • 【Marine Grade】Antsky wedge anchor bolts are made from high quality 316 STAINLESS STEEL, it's rust resistance, can last long in wet and humid environments；.
  • 【Diameter】The OD of the anchor is 3/8'', the total length is 3-1/2" , the length of the threads on the anchor is 2"；.
  • 【Black Painting】Our anchor's surface is electric painted into black colour, which is special made for longer working life and stylish looking；.
  • 【Application】This anchor is designed to use in concrete、rocks etc. base material；.
  • 【Note】The anchor requires a pre-drilled hole in the base material, which must be same size as the OD of the anchor, we suggest to use a 3/8'' drill bit..
Check Stock

AMRL-57404 * Lewmar Galvanized Delta Anchor - 9Lb - For Boats up to 22

  • The high-grade manganese steel used in the construction of the Delta anchor gives it maximum tensile strength..
  • Its unique shank profile and ballasted tip make the Delta anchor self-launching..
  • The low centre of gravity and self-righting geometry ensure that the Delta anchor will set immediately..
  • Consistent and reliable in performance, the Delta anchor has Lloyd's Register Type Approval as a High Holding Power anchor and is specified as the....
  • Dimensions: AMRL-57404 - 9Lb. - 20 1/4" L x 9" W AMRL-57406 - 14Lb. - 23 3/8" L x 10 3/8" W AMRL-57410 - 22Lb. - 27 3/8" L x 12 1/4" W AMRL-57416 -....
Check Stock