ReviewsHigh speed Steel Cutter

aTourer Tungsten Carbide Burr Set Rotary File Rasp 1/8 & 1/4 Cutting Head Die Grinder Milling Bit 20pcs Single Burr Double Cut 20pcs

【Advanced Carbide Material】The rotary burrs are made of Tungsten Carbide, which is sharp and sturdy. And the hardness can reach to HRC70. The durability of carbide burr is 10 times higher than high speed steel cutter (HSS cutter). 200 times more than the small wheel durability. Comprehensive processing costs can be reduced by about 10 times..
【Double Cut or Single Cut】Double cut burr have more cutting edges and could remove material much faster. It is more suitable for relatively low density materials such as wood, plastic, aluminum, soft steel and all non-metal materials. Single cut burr provides large, wide flutes evacuate the large chips easily and also prevent iron-chip accumulate and over-heat cause cutter head damage. It is more suitable for relatively high density materials such as iron, alloy steel, stainless steel etc..
【Professsion 20 PCS Set】The carving bits include A, C, D, E, F, G, H, L, M and N type burrs. There are 2 sizes for each type burrs, which is 1/8 shank 1/8 head diameter and 1/8 shank 1/4 head diameter. They are suitable for almost everything you need for engraving, cutting, shaping, grinding, polishing and removing sharp edges..
【Easy to Use】 If the cutting bits are chipping easily this could be due to the speed ....

Check Stock

MXBAOHENG Electric Rotary Cutter Cordless Electric Scissor Rechargeable Fabric Shear for Cloth/Paper/Carpet/Leather Cutting Thickness ≤2.5cm (2 Batteries)

[Large capacity lithium battery]: This cordless rotary cutter comes with 2 of 2000mAh lithium battery. Surging power provides continuous power output and improves work efficiency. Fast charging is about 100 minutes. When fully charged, the charging indicator turns from red to green..
[High speed steel blade]: This electric cordless rotary cutter comes with 2 HSS high speed steel blades, the blades are finely ground, sharp and wear-resistant..
[Sharpening function]: This electric rotary cutter comes with the sharpening function. When the cutting fabric has burrs and the blade is not sharp enough, press the sharpener lightly for 1-3 seconds, it will start to sharpen the knife automatically..
[Parameters]: Length: 30cm Width: 5.4cm Cutting thickness≤2.5cm Weight: 1.4kg.
[Wide application]: This rotary cutter is suitable for cutting a variety of materials, such as clothes, carpet, foot pad, leather, cardboard. It is a convenient cutting tool for home or industrial use..

Check Stock

ATOPLEE Rotary Burr Set,10pcs 1/8 Inch Shank Double Cut Carbide Tungsten Steel Cutting Burrs Set for Woodworking Drilling,Carving Engraving

【SIZE】 Shaft diameter: 1/8 inch(3mm).
【SPEED】 The speed is generally 6000-30000 rpm.Too high speed may bend the shaft ..
【DESIGN】Material:Tungsten Carbide.The double-line design of the cutter head makes the cutter head more sharp and wear-resistant, with high....
【USED】Tungsten steel grinding head is widely used in industrial sectors such as machinery, aviation, automobile, shipbuilding, chemical....
【INCLUDED】10pcs Tungsten steel Burrs in a storage box..

Check Stock

TOLESA Pipe Cutter Tool 3/16-2 Inch 5-50mm Heavy Duty Metal Pipe Cutter With Deburring Tool Pipe Reamer Sharp Copper Tube Cutter Speed Cutting Tubing Cutter For Stainless Steel Aluminum Brass Pipe

【Precision Cutting】 - The 2 inch metal pipe cutter tool is equipped with sharp SKD cutter wheels and 6 high-density ball bearing rollers to ensure a firm grip on pipe during tube cutting process, especially for various metal, stainless steel, copper pipes and tubes. It saves you from the trouble of uneven cutting surface due to unstable clamping..
【Heavy Duty】 - The copper pipe cutter is made of high-density but lightweight aluminum alloy, which is durable and compact. Copper tubing cutter can ensure your cutting work is smooth and will not break after many cuts, and has a longer service life. And the aluminum alloy body makes the conduit cutter more suitable for cutting high-density metal materials..
【Clean Cutting】 - The stainless steel pipe cutter with 6 ball bearings provides you with smooth cutting and improved cutting efficiency. However, some small burrs on the edges are inevitable in the process of cutting tube. That's why our aluminum pipe cutter is equipped with a deburring tool pipe reamer, which consists of a sturdy plastic construction and a high-speed steel blade. It can ream the inside and outside of the cut to prevent scratching..
【Ease Of Use】 - The bottom of the brass pipe cutter is equipped with a knob, which is comfor....

Check Stock

Libraton Copper Tube Cutter 1/4" to 2-3/4", Tube Cutter, Heavy-duty Tubing Cutter for Copper Pipe with Deburring Tool

[High-quality Blade] Libraton pipe cutter blade is made from aluminum alloy, wear-resistant. It will never get rust..
[Reasonable Design] The tubing cutter is attached with a bearing, fitted on the roller to make the rotation smoother and clean..
[Wide Application] The copper tube cutter can be used to cut copper pipe, aluminum pipe and thin stainless steel tube. Cutting range is up to 2-3/4" (70mm)(OUTER DIAMETER)..
[Usable Attachment] There is a deburring tool attached with the pipe cutter tool, made of sturdy plastic construction and high-speed steel baldes. It can deliver quick, clean and easy inside diameter reaming of different tubes (e.g. copper, aluminum, and THIN stainless steel tubes).
[Cutting Efficiency] Solid ergonomic PVC knob is designed on the bottom of the copper cutter, providing the stability when using the cutter and improving the cutting efficiency..

Check Stock

Dremel 9909 Tungsten Carbide Cutter,Silver

The product is 1/8" Diameter, Tungsten Carbide Cutter.
Shapes, smooths or grinds especially hard materials including: hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics and hard woods..
A high-speed cutter made of tungsten carbide, the hardest material next to diamonds..
Do not use this cutter for drilling holes or for enlarging holes that are less than twice the diameter of the cutter. The tungsten carbide surface can easily catch the side of a hole and break the bit..
For best results, insert the accessory bit all the way into the tool and then back it out slightly before tightening down. This provides plenty of shank for the collet or chuck to hold onto the bit..

Check Stock

Bottle Cutter Machine Genround Bottle Cutting Machine Glass Bottle Cutter Kit Glass Bottle Cutters to Cut Bottles Electric for Wine Bottles Sea Glass Arts & Crafts DIY Flower Pot Jar

【What's in the box】Genround electric cutter set include Bottle Cutter Machine with 7-speed power supply, 2x spare saw blade, 5x wrench, 1x Chuck....
【More efficient】The electric glass bottle cutter adopts 110W pure copper motor, which is full of power, and the speed can reach 6000r/min, which....
【7 speeds】The speed of the electric cutting machine can be adjusted in seven speeds. You can adjust the cutting speed according to your needs,....
【High-quality material】Made of high-quality aluminum alloy and stainless steel, it is not easy to rust, smooth, wear-resistant,....
【Wide use】The upgraded bottle cutting machine can be used for DIY candle cups, flower pots, pen holders, ornaments, etc., to create your own....

Check Stock

23 Pack Woodworking Chamfer Drilling Tool, 6pcs Countersink Drill Bit, 7pcs Three Pointed Countersink Drill Bit, 8pcs Wood Plug Cutter, with L-Wrench and Automatic Center Punch

【Professional Woodworking Set】- Woodworking chamfering drill set includes 6pcs 1/4" hexagonal shank HSS 5-edge 90 degree countersunk bit, 7pcs triangular high-speed steel countersunk bit with L-shaped wrench.
8pcs cork milling bit and 1 automatic center punch.
【Three Pointed Countersunk Drill Bit】- It's made of high-speed steel, with good wear resistance and durability, including 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 10mm pilot holes, large chip flutes and five chamfers for speed up cutting speed and easier to discharge wood chips.
【Wood Plug Cutter】- 3/8" shank wood plug cutter bit set is made of durable carbon steel, used for tapered 1/4.

Check Stock

It Works Great HSS Lathe Tool Bit 8mm x 8mm x 200mm, Square Lathe Turning Tool Blanks, High Speed Steel Rectangular Fly Cutter Mill Blank (5/16 inch x 5/16 inch x 8 inch ) 2pcs

Specifications: Size: 8mm x 8mm x 200mm, hardness HRC60~62. High-speed steel lathe tool bit.
High-speed Steel Tool: High-speed steel tool bit is with combination of hardness and toughness for wear resistance.
Features: Parallel style cutter is with continuous width of cutting edge throughout length of tool bit.
General Purpose: HSS tool bit is a superior finishing tool for cuts in hard materials of mild steel, alloy and tool steel.
Versatile Tool Bit: Ideal for milling, turning, parting, engraving, drilling, punching, etc. Commonly used on a lathe, a milling machine fly cutter or a metal shaper.

Check Stock

uxcell T-Slot Milling Cutters 3mm Depth 25mm Cutting Dia 12mm Shank Tungsten Carbide Tip 6 Flutes T Slot End Mill for Stainless Steel Copper Aluminum

T-Slot Cutters: Cutting Dia.: 25mm / 0.98".
Number of Flutes: 6 Flutes. Tungsten carbide tip has good toughness, high hardness, wear resistance, and good cutting strength. Provide faster cutting speeds than other substrates..
Wide Applications: Suitable for machining T slotting, straight slotting, side grooving and half-round keyway on the work piece. Widely used for milling stainless steel, carbon steel, alloy steel, copper, tool steel, cast iron, aluminum, etc...
Features: The cutting edge is sharp and not easy to break. High-frequency welding process is adopted for the connection between the cutter head and the cutter body. Universal chamfered round shank, easier clamping, stable cutting process..
Easy to Use: Used on drilling and milling machines, machining centers. Properly reduce the cutting speed and feed can prolong the life of the milling cutter. Add cutting fluid to protect the cutting edge and make the cutting smoother when working..
Tips: The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life..

Check Stock

uxcell T-Slot Milling Cutters 6mm Depth 25mm Cutting Dia 12mm Shank Tungsten Carbide Tip 6 Flutes T Slot End Mill for Stainless Steel Copper Aluminum

T-Slot Cutters: Cutting Dia.: 25mm / 0.98".
Number of Flutes: 6 Flutes. Tungsten carbide tip has good toughness, high hardness, wear resistance, and good cutting strength. Provide faster cutting speeds than other substrates..
Wide Applications: Suitable for machining T slotting, straight slotting, side grooving and half-round keyway on the work piece. Widely used for milling stainless steel, carbon steel, alloy steel, copper, tool steel, cast iron, aluminum, etc...
Features: The cutting edge is sharp and not easy to break. High-frequency welding process is adopted for the connection between the cutter head and the cutter body. Universal chamfered round shank, easier clamping, stable cutting process..
Easy to Use: Used on drilling and milling machines, machining centers. Properly reduce the cutting speed and feed can prolong the life of the milling cutter. Add cutting fluid to protect the cutting edge and make the cutting smoother when working..
Tips: The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life..

Check Stock