ReviewsHigh speed Steel End Mills

Niagara Cutter - SPB540-0.500-D2-B.3-Z4 17012957 Cobalt Steel Ball Nose End Mill, Weldon Shank, TiCN Finish, Roughing and Finishing Cutting, 30-Degree, 4-Flute, 3' OAL, 0.500' Cut Diameter, 0.500' Shank Diameter

  • 4 Flute design for creating finer finishes and creating a higher metal removal rate.
  • General purpose end mill for working on all types of materials and high temperature alloys.
  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.
  • Titanium Carbonitride(TiCN) allows for optimal end mill and machine tool performance with it's ability to increase material removal rates 3 to 5 times that of uncoated tools.
  • Center Cutting End Mills are designed with "End Teeth" making these ideal for applications such as profiling, contour and slotting.
Check Stock

Niagara Cutter 17011737 Cobalt Steel Square Nose End Mill, Inch, Weldon Shank, Uncoated (Bright) Finish, Finishing Cut, 30 Degree Helix, 6 Flutes, 3.25' Overall Length, 0.500' Cutting Diameter, 0.500' Shank Diameter

  • fewer flutes have more chip-carrying capacity and more flutes produce a finer finish.
  • Cobalt steel resists abrasion and high cutting temperatures, and has higher feed rates than high-speed steel.
  • Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials.
  • Square nose end mills (also called square end) create sharp, unrounded cuts.
  • Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling.
Check Stock

MNKNENG 8 Set 1/4 inch End Mill Bits 4 Flute Straight Milling Cutter HSS-AL CNC Square Nose End Mill Bits Straight Shank Drill Bits for Wood, Steel, Titanium(6.35mm,4T) 1

  • Dimensions ---- Shank diameter: 1/4inch / 6.35mm.
  • Strong and Durable ---- Milling cutter is made of HHS-AL material, it is high-wearable and has a long life.
  • Smooth cutting and fast chip-removal, gives outstanding cutting performance and wear resistance..
  • Sharp Edge ---- The design of 4 flutes, sharp edge, and superior wear resistance at high cutting speeds.
  • Durable, high precision and not easy to break.
  • easy installation and improved work efficiency..
  • Application ---- 1/4 inch end mill bits are suitable for side milling, end milling, finish machining, etc. For carving, cutting, engraving, milling in materials like die steel, carbon steel, alloy steel, cast iron, tool steel, titanium, aluminum, rosewood, density board, wood, acrylic, PVC, MDF etc..
  • Package Contents ---- 8pcs 1/4” end mills, each is individually packed in a plastic storage box..
Check Stock

Genmitsu 4pcs 2-Flute Tapered Ball Nose End Mills Tungsten Carbide Cutter with Nano Blue Coat R0.25-1.0 1/8” Shank TB04A

  • High Quality: The Genmitsu end mills are made of ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality..
  • Cost-Effective: Coming with 4x 2-Flute tapered ball nose end mills, Shank Diameter: 3.175mm, Radius: 0.25, 0.5, 0.75, 1.0mm, Cutting Length: 15mm, Overall Length: 40mm..
  • Versatile: Perfect for 3D machining jobs like molds, rapid prototyping, models and other other precision parts processing, these Tapered ball nose bits can do the best..
  • Applicable Materials: These nano blue coating bits have an HRC rating of 65 and are optimal for milling a wide range of materials, including plastics, aluminum, circuit board, wood, etc. To learn more about how to choose the right bits to meet your needs, please find the Comparison Chart (CNC Bits Buying Guide) at the Product Guides and Documents Section below..
  • Wide Compatibility: Genmitsu TB04A tapered ball nose end mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure ....
Check Stock

YG-1 E2237 Cobalt Steel Corner Rounding End Mill, Weldon Shank, Uncoated (Bright) Finish, Non-Center Cutting, 4 Flutes, 2.5\ Overall Length, 0.4375\ Cutting Diameter, 0.375\ Shank Diameter

  • Corner rounding end mills are designed to take the edge off sharp corners.
  • Four flutes produce a better finish than fewer flutes.
  • Cobalt steel resists abrasion and high cutting temperatures, and has higher feed rates than high-speed steel.
  • Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials.
  • Non-center-cutting design supports peripheral milling and finishing.
Check Stock

Genmitsu 40pcs End Mills CNC Router Bits, 1/8\ Shank CNC Cutter Milling Carving Bit Set Including 2-Flute Flat Nose & Ball Nose End Mill, Nano Blue Coat & Titanium Coat CNC Bits, MC40A

  • High Quality: The Genmitsu end mills are made of ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating /Titanium Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality..
  • 2-Flute Spiral Flat Nose & Ball Nose End Mills -- Shank Diameter: 3.175mm, Cutting Diameter: 3.175mm, Cutting Length: 17mm, Overall Length: 38mm..
  • Two End Mill Sets -- Shank Diameter: 3.175mm, Cutting Diameter: 0.8 - 3.0mm (0.8/1.0/1.2/1.4/1.6/1.8/2.0/2.2/2.5/3.0mm), Cutting Length: 17mm, Overall Length: 38mm, with Nano blue and Titanium coating..
  • Applicable Materials: Widely used in various materials including plastics, aluminum, circuit board, wood, as well as other precision parts processing. To learn more about how to choose the right bits to meet your needs, please find the Comparison Chart (CNC Bits Buying Guide) at the Product Guides and Documents Section below..
  • Wide Compatibility: The MC40A end mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized co....
Check Stock

Thread Mills Exercise Equipment for Home Use Porta 3.175mm Shank Single Flute Spiral Milling Cutter 10pcs Titanium Coated Carbide End Mill CNC Router Bit Engraving Milling Cutter

  • Drilling and tapping in one, one-step processing, greatly save processing steps and time costs, improve working efficiency..
  • hex shank High Speed Steel screw spiral point thread metric plug drill bits, Have sufficient bending strength and wear resistance..
  • Suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron, etc..
  • 1. These CNC end mills are made from high quality material of tungsten steel.
  • 2. Wear-resisting and Not easy to stick milling cutter.
Check Stock

SpeTool 5Pcs 1/8 inch Aluminum End Mills 2 Flutes CNC Spiral Router Bits Non-Ferrous Metal Upcut 1-1/2 inches Long for Woodworking Cutting

  • 【SPECIFICATIONS】End mills for aluminum with 1/8” shank, 1/8” cutting diameter, 7/16” cutting length and 1-1/2” total length, 2 flutes with flat top, 5 pieces included in the package..
  • 【HIGH PERFOMANCE】These end mills for aluminum are designed for perfect surface finish because of the effective chip removal. With the long service life they are suitable for side milling, end milling, finish machining, etc..
  • 【HIGH PRECISION】High precision grinding and polishing, high resistance to abrasion and temperature resistance, good rigidity, high durability and not easy to break..
  • 【ALUMINUM APPLICATIONS】Best for processing aluminum 6061,7075 etc. Also suitable for non-ferrous metal, plywood, OAK, MDF, and Any Hardwood Working..
  • 【WIDELY USED】These aluminum end mills suit for CNC routers, any brands of plunge routers with 1/8" collet..
Check Stock

SpeTool 1/4 End Mill for Aluminum 3 Flutes CNC Spiral Router Bit for Aluminum Cut Non-Ferrous Metal Upcut 2.5 inches Long 5 Pieces

  • 【SPECIFICATIONS】End mills for aluminum with 1/4” shank, 1/4” cutting diameter, 3/4” cutting length and 2-1/2” total length, 3 flutes with flat top, 5 pieces included in the package..
  • 【HIGH PERFOMANCE】These end mills for aluminum are designed for perfect surface finish because of the effective chip removal. With the long service life they are suitable for side milling, end milling, finish machining, etc..
  • 【HIGH PRECISION】High precision grinding and polishing, high resistance to abrasion and temperature resistance, good rigidity, high durability and not easy to break..
  • 【ALUMINUM APPLICATIONS】Best for processing aluminum 6061,7075 etc. Also suitable for non-ferrous metal, plywood, OAK, MDF, and Any Hardwood Working..
  • 【WIDELY USED】These aluminum end mills suit for CNC routers, and Makita, Bosch, or any brands of plunge routers with 1/4" collet..
Check Stock

SpeTool 1/8 End Mills for Aluminum 3 Flutes CNC Spiral Router Bits for Aluminum Cut Non-Ferrous Metal Upcut 1.5 inches Long 5 Pieces

  • 【SPECIFICATIONS】End mills for aluminum with 1/8” shank, 1/8” cutting diameter, 7/16” cutting length and 1-1/2” total length, 3 flutes with flat top, 5 pieces included in the package..
  • 【HIGH PERFOMANCE】These end mills for aluminum are designed for perfect surface finish because of the effective chip removal. With the long service life they are suitable for side milling, end milling, finish machining, etc..
  • 【HIGH PRECISION】High precision grinding and polishing, high resistance to abrasion and temperature resistance, good rigidity, high durability and not easy to break..
  • 【ALUMINUM APPLICATIONS】Best for processing aluminum 6061,7075 etc. Also suitable for non-ferrous metal, plywood, OAK, MDF, and Any Hardwood Working..
  • 【WIDELY USED】These aluminum end mills suit for CNC routers, and Makita, Bosch, or any brands of plunge routers with 1/8" collet..
Check Stock

OSCARBIDE Indexable End Mill R8 Shank,1''Cutting Diameter,5-9/16\Overall Length,2 Flute with 2 Pieces TPCN1103PDTR(TPCN22PDTR) Carbide Inserts

  • Carbide Indexable End Mills,1" Cutting Diameter, R8 Shank,TPG22 inserts.Overall Length 5-9/16”.
  • Tin coated carbide turning milling TPG22 inserts,last longer and can run at faster speeds than uncoated ones..
  • When a cutting edge becomes dull, you just need to rotate the insert in the holder to use the sharp edge..
  • Indexable End Mills Positive rake 90°, right-hand cut.Reduces cutting forces,Maximum rigidity.
  • Used for slotting and peripheral milling.
Check Stock