ReviewsHigh strength Wood Composite Filament

SainSmart PLA 3D Printer Filament,Toughness Enhanced PLA,Dimensional Accuracy +/- 0.03 mm, 1 KG Spool, 1.75 mm, White

  • Recommended Extrusion/Nozzle Temperature: 200 - 240 °C.
  • Recommended Bed Temperature: 60 - 80 °C.
  • High Strength PLA+ Filament has excellent machinal properties when compared with general PLA filament, its impact resistance is 4 times the standard one, tensile strength 1.5 times and elongation at break even 10 times. In combination with its resistance to temperature up to 68 °C (154°F), this PLA+ filament is a great fit for functional use..
  • Quality raw materials that eliminate impurities and bubbles, enabling smooth and effective filament feeding without jamming and warping..
  • With filaments well-wound onto the spool and a +/- 0.03 mm dimensional accuracy, what you got is a tangle-free filament that delivers smooth and consistent performance..
  • This PLA filament is an odorless and environmentally-friendly, plus with its ease of printing, making it your all-around, everyday budget filament..
Check Stock

YXPOLYER Super Tough Easy Print Nylon Filament 1.75,3D Printer Engineering Filament,Strong & Tough & Heat Resistant&Corrosion Resistance&Good Abrasion&Good Aging Nylon Filament,1kg Spool,White

  • ★【YXPOLYER Nylon Filament 1.75】YXPOLYER Nylon is a high-strength modified Nylon printing material. It is super tough, high-strength, easy to print, and has excellent temperature resistance, up to 120°C or higher. Nylon lends itself well to things like living hinges and other functional parts..
  • ★【Super Tough Easy Print Nylon Filament】YXPOLYER nylon Filament has Good toughness, impact strength is more than 10 times that of ordinary PLA.
  • Corrosion resistance, can withstand most organic solvents.
  • Good abrasion resistance and good aging resistance；Suitable for automotive industry signal lamp bases, fuel dispensers, surface mount devices in the electronics and electrical markets, and household products, etc..
  • ★【Printing conditions】We recommend print the Nylon filament at a Printing temperature of 220℃-280℃, bed temperature of 80-100°C.Dimensional Accuracy +/- 0.04mm. YXPOLYER filament has wide compatibility due to the small diameter error, it's suitable for almost all 1.75mm FDM 3D printers..
  • ★【Unique Package】Our packaging is vacuum sealed with semi-aluminum foil bags,which can better isolate air and water molecules.We use a transparent plastic film to adhere to the surface of the box by hot pressing, so that the periphery of ou....
Check Stock

Inland 1.75mm Translucent Blue PETG 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm - 1kg Spool (2.2 lbs)

  • 1 KG (approximately 2.2 lbs) Spool/ 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
  • Recommended Extrusion/Nozzle Temperature: 230°C - 250°C (440°F - 480°F)/ No heated bed needed/ Vacuumed sealed with desiccant.
  • PETG Filament Features: Durable/ good adhesion/ high strength/ high temperature resistant/ low shrinkage/ smoother finish/ odorless, combines the advantages of both PLA and ABS.
  • Premium Quality: Inland PETG 3D Printer Filament Undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time creating! 100% satisfaction guarantee provided.
Check Stock

Inland Tough PLA 3D Printer Filament 1.75 mm – Tougher Than PLA+ - Dimensional Accuracy +/- 0.03 mm - 1 kg Spool (2.2 lbs) – High Impact Strength- Black

  • ...e that you spend less time troubleshooting and more time printing! Your filament will arrive completely dried and vacuum sealed with desiccant to ensure a high-quality smooth print..
  • EASY-TO-USE: Inland Tough PLA filament is as easy to use as regular PLA, but has higher impact resistance. Tough PLA is engineered for strength and durability and is often compared to ABS for its mechanical characteristics. Produce your best print with our no-clog, bubble-free durable Tough PLA. The Inland filament can be used with most FDM and FFF 3D Printers..
  • HIGH-QUALITY TOUGH PLA: The Tough PLA is non-toxic and tightly wound on its cardboard spool. To keep your filament tangle free do not let go of the filament on the spool! Always hold the spool and filament tightly, do not allow your filament to spring back..
  • TOUGH PLA FEATURES: Tough PLA Filament is as easy to print as regular PLA, but with higher impact resistance. Tough PLA is engineered for strength and durability while taking advantage of the reliability and ease-of-use that PLA is known for. Odorless tough PLA doesn't give off a toxic smell during printing. It's generally considered an odorless filament..
Check Stock

SUNLU Wood PLA 3D Printer Filament, 1.75 PLA Filament Dimensional Accuracy +/- 0.02 mm, 1 kg Spool, 1.75mm Wood fibers (Real Wood)

  • ① 【20% WOOD Fibers】SUNLU Upgrade Spool Wood PLA Filament is mixture of 20% recycle wood with polymer,Gives prints surface of wood color and texture. The print even smells like wood.SUNLU 1kg Wood filament combines real wood fibers, To satisfy your demands for printing projects of functional parts with wooden texture.
  • ②【Dimensional Accuracy & Consistency】Advanced CCD diameter measuring and self-adaptive control system in the manufacturing guarantee these Wood PLA filaments of 1.75 mm diameter, dimensional accuracy + / - 0.02 mm without any exaggeration.
  • ③【Clog-Free, Bubble-Free & Easy-to-use】SUNLU WOOD PLA 3D Printer Filament is completely mechanically wound, with sturdy fixing holes, 100% tangled free, and manual inspection one by one. Which has an advantage of high purity with low shrinkage. It enables you to have a smooth and stable printing process, with excellent quality prints..
  • ④【Wide Compatibility】Complete drying for 24 hours before packaging and vacuum sealed with desiccants in nylon re bag.
  • Works and harmonizes perfectly with all common 1.75mm FDM 3D printers, thanks to the high quality standards in terms of manufacturing accuracy and the small tolerance in diameter of +/- 0.02mm.
Check Stock

IEMAI Carbon Fiber PLA 3D Printer Filament, Carbon Fiber Filament 1.75mm, PLA Filament Spool 1KG, Dimensional Accuracy +/- 0.02mm Black Filament for 3D Printer

  • IEMAI CARBON FIBER PLA 3D PRINTER FILAMENT - 100% virgin material without cheap plastic fillers, Vacuumed Sealed With Desiccant. Carbon Fiber (containing 20% carbon fiber , in weight) is combined with PLA to form a strong plastic which is ideal for printing items requiring added strength, more abrasive than standard PLA..
  • PLA Filament -- Material : 80% PLA filled with 20% Carbon fiber . Weight: 1 KG (approximately 2.20 lbs) . Color: Matte Black . PLA filament is made of high-strength, high-modulus fiber material, full mechanical winding and strict manual examination, which guarantee the filaments tidy and easy to be fed. Works perfectly with most FDM 3d printers on the market, such as MK3, Ender 3, Monoprice FlashForge and etc..
  • PLA 1.75 mm - High Dimensional accuracy - 1.75 mm in diameter, Minimum demission tolerance +/- 0.02mm to ensure consistent feeding and smooth printing. Recommend Printing Temperature: 190℃-220℃/374°F-428°F( dependent on printer model). Recommended Print Speed: 50-100mm/s. Heat Bed temperature: 50 – 60°C/122°F-140°F..
  • Carbon fiber filament is a tough material with a nice matte finish. The increased strength provided by the carbon fiber particles contributes to greater dimensional stability, helping to avoid warping and....
Check Stock

NOVAMAKER PLA Wood 3D Printer Filament 1.75mm with Cleaning Filament, 1kg(2.2lbs) Spool , Dimensional Accuracy +/- 0.03 mm, Dark Wood PLA

  • 【1kg Spool Wood & 20g Cleaning Filament】 NOVAMAKER Upgrade Spool Wood Filament is mixture of 20% recycle wood with polymer,Gives wooden colored and texture. 1kg Wood filament combines real wood fibers, meeting your demands for printing projects of functional parts with wooden texture..
  • 【Less Tangle】 Full mechanical winding and strict manual examination, which guarantee the PLA filaments tidy,and solves the problem of printing interruption caused by the knotting of the wire.Once you have completely untangled the knot, you need to make sure you use a clip pass the filament through a hole in the side of the spool..
  • 【Dimensional Accuracy & Consistenc】This 1.75mm diameter PLA filament has been made with strict production standards, so novamaker can assure that you that its size remains consistent all throughout.And solves the problem of printing interruption caused by the knotting of the filament.Works and harmonizes perfectly with all common 1.75mm FDM 3D printers..
  • 【Clog-Free, Bubble-Free】Complete drying for 24 hours before packaging.Novamaker use vacuum-sealed packaging bag for packaging 3d printer filament to keep the humidity percentage at a minimum and controlled. To avoid clogging of the nozzles and bubbling..
Check Stock

eSUN 3D Printing Filament Vacuum Storage Kit, Spool Storage Sealing Bags Dust Proof Humidity Resistant for Keeping Filament Dry, 10 Vaccum Bags / Kit, 33 x 38cm

  • 【Package List】One eSUN vaccum kit includes Vacuum Bag*10, Hand Pump*1, Sealing Clip*2, Discoloration Desiccants*15, User Manual *1. One kit 28pcs in total, which can satisfy storaging 10 used filaments at the same time..
  • 【Humidity Resistant & Good Sealing Effect】The vaccum bags apply bilateral sealing and single side embossed design,which is good for dust proofing and humidity resisting of filament with high water absorption like PVA、ePA、ePA-CF、ePA-GF、ABSMAX、TPU-95A.Hand pump saves your time and improve the efficiency..
  • 【High Compatibility】eSUN vacuum bags are especially designed for 3D printing filament and is compatible for all 0.5KG/0.75KG/1KG filaments and 1.75mm/2.85mm/3mm filament.It can also used for food or other material storage..
  • 【 Sensitive Discoloration Desiccants】Unique sensitive discoloration desiccants design. Easy to observe the humidity of filament while storaging in the vaccum bags. Discoloration desiccants will turn into pink in high humidity and you will need change the desscicants when it changes color..
  • 【Safe & Environment-friendly】eSUN filament vaccum bags are BPA-free, which is totally safe and environment-friendly.eSUN vaccum bags is made of food grade PE+PA composite material,durable and recyclable..
Check Stock

YXPOLYER Lightweight high Strength PA6 Carbon（Chopped Carbon Fiber），1.75mm 3D Printer Filament,Nylon6 Engineering 3D Printing Materials,tensile Strength Increased 50%，250g Spool,Black

  • ★【Nylon-CF15 3D printer Filament】YXPOLYER Nylon-CF15 is a chopped carbon fiber filled high-performance thermoplastic. The material is made of a mixture of nylon and carbon fiber. It has the characteristics of light weight and high strength. It can be applied to light molds and functional prototypes,Production parts and tool applications..
  • ★【Features & applications】 Carbonfiber reinforced nylon； High tensile strength（Tensile strength: 58MPa） and rigidity（Flexural modulus: 3593MPa ）； Excellent chemical and thermal resistance；Strong layer bonding；Suitable for the automotive industry, sporting goods, aerospace and other fields, such as oil-free bearings, sports equipment and flight equipment, etc..
  • ★【Printing conditions】We recommend print the Nylon-CF15 filament at a Printing temperature of 220℃-280℃, bed temperature of 80-100°C..
  • ★【1.75mm engineering Filament Diameter】Dimensional Accuracy +/- 0.04mm. YXPOLYER filament has wide compatibility due to the small diameter error, it's suitable for almost all 1.75mm FDM 3D printers..
  • ★【Vacuum packaging】 Complete drying for 24 hours before vacuum packaging, which can effectively protect the filament from moisture. Note points for printing and storage of engineering ....
Check Stock

Creality PETG Filament 1.75 mm - White | 3D Printer Filament | 1Kg Spool (2.2 Lbs) | Dimensional Tolerance +/- 0.2 mm | Fit Most FDM Printers

  • ...you will find it to be easy to print with and comes out great in a wide temperature range. PETG material, environmental protection, high gloss, printing is not easy to crack and will not emit odor..
  • QUALITY – Creality PETG filament is great even for large flat prints due to its very low shrinkage. A combination of strength, low shrinkage, smoother finish, and higher heat resistance make PETG an ideal everyday alternative to PLA and ABS. Other features include great layer adhesion, chemical resistance including acids and water. PETG is also less prone to moisture-related issues..
  • FIT MOST FDM PRINTERS - Creality PETG filament is characterized by consistent quality, high dimensional accuracy, and has been extensively tested on a variety of printers.
  • yielding very strong and precise prints. Creality 3D Printer filament is suitable for almost 99% FDM printers in 3D Market..
  • UNIQUE FEATURES – Creality PETG Filament is more cost effective than ABS and Easier to print with. High purity, no bubbles, no Warping, High precision, tolerance control within 0.03mm, printing effect is more remarkable, good tensile strength, ductility, fluidity, high toughness, low weight and the improved wire coil is more humanized.
Check Stock

Creality Official Ender 3 Glass Bed Upgraded High Hardness Durable Glass Platform for 3D Printer Tempered Glass Build Plate for Ender 3 Pro Ender 5 Ender 5 Pro Ender 3 V2 235x235×4mm

  • Easy to Remove Model within 1 Minute: The coating of the microporous composite material has a microporous structure. The filament will be 'extruded'....
  • High Viscosity and Strong Adhesion: Composite nano molecule coating has high viscosity after heating, which makes the model have strong adhesion..
  • 0.15MM of Flatness Recovery Model: This is the combination of glass and composite. Due to the flatness of glass and the uniform composite coating of....
  • Wear-Resistant and Scratch-Resistant, easy to clean: There is a protective film on the surface of the composite coating, which is of anti-scratch and....
  • High Hardness and Durable: This is the combination of chemically tempered glass and surface composite coating. The flatness of glass will be much....
Check Stock