ReviewsHigher Viscosity Index

Aeroshell SHAEW155-12 15W50 Shell Aviation Oil 1 Quart 12 Pack

The non-ash forming, polymeric additive promotes engine cleanness.
High viscosity index semi synthetic oil protects engine components under high shear stresses.
Reduces oil consumption up to 50percent and fuel up to 5percent over straight grade engine oils.
Compatible with other approved aircraft piston engine oils.
performance allows for improved engine operation in temperature extremes.

Authorized by USDA as a lubricant for Use where incidental contact with food may occur, USDA rated h-1, FDA approved.
Technical white grease, impervious to water, will NOT taint, operating temperature 0-185 degrees.
Petrol-gel is the purest of lubricants, made with odorless, tasteless high viscosity Index paraffin base oil.
Petrol-gel is compounded with appropriate food grade additives to meet the performance demands for all Recommended applications.

... more transparent and yellow-resistant than other UV epoxy resin. Apply without leaving traces, suitable for any light-transmitting material. The UV Resin is also great for making vaults, seals, and tiny delicate landscape DIY work like ocean waves, water splashes, wine more astonishing micro landscapes, etc..
High Viscosity: LET’S RESIN well-tailored UV resin kit formulation and perfect photoinitiator ratio to help you achieve the best curing effect during production. And add acrylic adhesive,so that clear UV resin has high adhesiveness,viscosity up to 3700mpa·s,can bond various materials,such as glass decoration,crystal crafts,can also use UV glue to draw 3D paintings,use Make bubble texture on the tumbler cup,resin UV provides you with more creative space to create beautiful and dazzling works!.
Operation Tips: ① Store in a cool place. ②Before use, try a small amount to master the skills and techniques. ③The surface must be kept clean and dry when bonding. ④UV resin curing needs to be completed under the condition of ultraviolet light, please use a special UV resin lamp to cure. ⑤Do not touch with your hands immediately after UV light irradiation, and then touch after curing and cooling to avoid burns and fingerprints..

Top - quality motor oil for Ford, Lincoln and Mercury passenger cars.
American Petroleum Institute (API) - certified for gasoline engine service ILSAC GF - 5 and meets API SN or Energy Conserving.
Manufactured with high - viscosity index, premium - quality, synthetic base oils that provide good high - temperature and low - temperature....
Helps protect against high - temperature oxidation, low - temperature gelling, rust, corrosion and foaming.
Friction - reducing technology provides excellent wear protection and features energy - conserving characteristics, which offer significant....

Top - quality motor oil for Ford, Lincoln and Mercury passenger cars.
American Petroleum Institute (API) - certified for gasoline engine service ILSAC GF - 5 and meets API SN or Energy Conserving.
Manufactured with high - viscosity index, premium - quality, synthetic base oils that provide good high - temperature and low - temperature....
Helps protect against high - temperature oxidation, low - temperature gelling, rust, corrosion and foaming.
Friction - reducing technology provides excellent wear protection and features energy - conserving characteristics, which offer significant....

Spec. Gravity 1.16 g/cc Cured Water Absorption 0.23% After 24 hours Viscosity 4300 cP.
Mechanical Properties Hardness, Shore D 87 Lap Shear Strength 2000 psi Lap shear.
CTE, linear 30.6 µin/in-°F At 68 °F Max Service Temp Air 284 °F, Min Service Temp -94°C.
Mix Ratio, parts by weight 100/20 Resin/Hardener.

Set includes 1 ounce bottle each of thick (Maxi-Cure TM), medium (Insta-Cure+ TM) and thin (Insta-Cure TM) Cyanoacrylate Glue and Debonder (Un-Cure TM) and 2 ounce bottle of Accelerator (Insta-Set TM)..
Insta-Cure (TM) is the thinnest viscosity CA glue offered by BSI. It has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds..
Insta-Cure+ (TM) is BSI’s medium or higher viscosity CA glue used for loose fitting joints or filling small gaps.
Maxi-Cure (TM) is BSI’s thickest viscosity CA glue and is the best CA for most plastics, making it the perfect choice for plastic model assembly.
INSTA-SET (TM) is a catalyst which acts as an accelerator that allows CAs to fully cure in 6-8 seconds. INSTA-SET (TM) is formulated with a strawberry scent and activates CA without any degrading of the CAs strength. UN-CURE (TM) debonder will soften cured CA to clean up squeeze out, spills or for disassembly..

Spec. Gravity 2.32 g/cc Mixed Viscosity 995000 cP at temp 25.0 °C.
Mechanical Properties Hardness, Shore D 80 Adhesive Bond Strength 90 psi Lap shear 2 hrs At 65°C.
Electrical Properties Volume Resistivity 0.00011 ohm-cm,Dielectric Constant 4.8 At Frequency 1000 Hz.
Cure time 4 hrs At 65°C, 24.0 hour At 25°C.

Spec. Gravity1.16 g/cc Cured Water Absorption 0.23% After 24 hours Viscosity 4300 cP.
Mechanical Properties Hardness, Shore D 87 Adhesive Bond Strength 2100 psi Lap shear, 4 hrs At 65°C.
Thermal Properties CTE, linear 30.6 µin/in-°F At 68 °F Maximum Service Temp Air 248 °F.
Mix Ratio, parts by weight 100/20 Resin/Hardener.

6,000 HOUR SEVERE SERVICE - Extremely long life fluid, with very long oxidation life. 3 times the life of most other fluids..
ANTI-WEAR BOOSTER PACK - Contains a built-in severe service anti-wear booster pack. Three times the zinc of most other hydraulic oils..
HIGH VISCOSITY INDEX - Ultimate durability in all types of service. It does not overheat, prevents hydraulic cavitation, maintains fluid seals on pistons, and does not shear..
ZERO FOAMING - Virtually zero foaming on all industry-standard tests and ultra-rapid air release..
SAVES 50%- 80% on fluid costs annually vs regular or economy hydraulic oils..