ReviewsHitachi Table Saw Reset Button

HQRP Dust Bag compatible with Hitachi C12FA C12FCH C12FDH C12FSA C12LC C12LCH C12LDH C12LSH C12RSH C12RSH2 12' Miter Saws, for 2 1/2' dust port

HQRP® Dust Collector Bag with Wire Support Frame.
For Miter Saws with 2-1/2" dust port on the exterior of the saw !!! If the dust port is less than 2.5" in diameter, you will need some additional retainer..
Dimensions: L 10.75" x W 6", Diameter of ring 2 1/2".
Replacement for Hitachi part # 322955 Dust Bag.
Compatible with Hitachi 10" and 12" Miter Saw.
Collects up to 70% of dust and particles.
Easy to attach and detach to your miter saw.

Check Stock

Hitachi 967990 1/2-Inch Steel Band Saw Blade with Swaged Tip

Hitachi Power Tools has renamed to Metabo HPT. Same great tools, with only a new name..
Replacement blade for Hitachi model CB75F 14-1/2-Inch Resaw Band Saw.
Designed to deliver straight, accurate cuts across a broad range of materials.
Provides long tooth life and exceptional durability.

Check Stock

Hitachi 322714 Crown Molding Stopper Assembly R for Hitachi C10FCE and C10FCH Compound Miter Saws

Hitachi Power Tools has renamed to Metabo HPT. Same great tools, with only a new name..
Saves the user valuable time and simplifies cuts when walls are not square.
Fits Hitachi compound miter saw models C10FCE and C10FCH.
Compatible with Hitachi C10FCE and C10FCH Compound Miter Saws.

Check Stock

Delmar Tools Patented Push Block For Table Saws, Makes Narrow Rip Cuts Safe And Easy, Helps Prevent Kickback

...hands out of the way. Eliminates those dangerous close calls with your fingers by the saw blade on narrow rip cuts!.
USER FRIENDLY ADJUSTMENTS TO SET UP EACH RIP CUT- Adjustable center leg is easily adjusted by rolling a wheel with your thumb to set up different width cuts. Innovative balance wheel is deployed via a button to deliver stability on narrow cuts. No annoying thumbscrews that have to be loosened and tightened for each cut..
COMES FULLY ASSEMBLED, NO INSTALLATION NECESSARY- Arrives ready to go right out of the box, no frustrating assembly required. Other push blocks require frustrating installation with tons of moving pieces.
LIFETIME WARRANTY- Delmar Tools includes a lifetime warranty on this pushblock. Any issues down the line and you will be covered for a free replacement or a refund..

Check Stock

Portable Small Hobby Chop Saw,Portable Tabletop Saw for Crafts, 0-45° Angle and Height Adjustable for Soft Metal, Iron sheet, Wood, Plastic, Aluminum Alloy Cutting Mini Table Miter Saw

➤MINI TABLE SAW - This Mini Table Saw is a mini benchtop mounted cut-off saw with high-speed steel blade for cutting soft metal, wood, plastic, acrylic, bamboo material, handmade, etc..
➤MAIN PARAMETERS - Voltage: 110v 60HZ. Working voltage: DC12-24v. Cutting thickness: 26-29mm. Motor speed: 9000r/min. Adjustable angle: 0-45°. Product size: 15*18*11cm (5.91*7.09*4.33inch)..
➤POWERFUL MOTOR - The motor can use strong power for a long time and easily cut all kinds of soft materials. Low noise, working and running, the noise is around 80 minutes..
➤ADJUSTING RULER - 0-45 degrees, angle adjustment. Can meet your multi-angle cutting and polishing. The machine height adjustment button can effectively control the distance between the blade and the table..
➤EASY TO CARRY - Lightweight and easy to carry, driven by a high-efficiency, low-noise motor with 1 saw blade and 1 Adapter. You could not miss this mini table saw for crafts, you could DIY at home, anywhere you like with this table saws..

Check Stock

Hitachi 323547 Crown Molding Stopper Assembly for R Hitachi Compound Miter Saws

Saves the user valuable time and simplifies cuts when walls are not square.
Fits Hitachi compound miter saw models C12LCH, C12LC and C12FCH.
Compatible with Hitachi Compound Miter Saws.

Check Stock

Portable Tabletop Saw, Mini Table Miter Saw, Small Hobby Chop Saw for Crafts, 0-45° Angle and Height Adjustable, Micro Cutting Machine for Soft Metal, Iron sheet, Wood, Aluminum Alloy (Silver)

➤MINI TABLE SAW - This Mini Table Saw is a mini benchtop mounted cut-off saw with high-speed steel blade for cutting soft metal, wood, plastic, acrylic, bamboo material, handmade, etc..
➤MAIN PARAMETERS - Voltage: 110v 60HZ. Working voltage: DC12-24v. Cutting thickness: 26-29mm. Motor speed: 9000r/min. Adjustable angle: 0-45°. Product size: 15*18*11cm (5.91*7.09*4.33inch)..
➤POWERFUL MOTOR - The motor can use strong power for a long time and easily cut all kinds of soft materials. Low noise, working and running, the noise is around 80 minutes..
➤ADJUSTING RULER - 0-45 degrees, angle adjustment. Can meet your multi-angle cutting and polishing. The machine height adjustment button can effectively control the distance between the blade and the table..
➤EASY TO CARRY - Lightweight and easy to carry, driven by a high-efficiency, low-noise motor with 1 saw blade and 1 Adapter. You could not miss this mini table saw for crafts, you could DIY at home, anywhere you like with this table saws..

Check Stock

Metabo HPT Dust Bag for Hitachi/Metabo HPT Miter Saws Black 322955M

Same tools. New Name. Hitachi Power Tools has renamed to Metabo HPT.
Includes (1) Metabo HPT 322955M Dust Bag for Miter Saws (Tools Sold Separately).
Measures Approximately 12 inches long and 5 inches deep.
Compatible with Metabo HPT / Hitachi Miter Saw Models C8FSE, C8FSHE, C10FCE2, C10FCH, C10FCH2, C12FDH, C12LDH, C12RSH, and C12RSH2.

Check Stock

Table Saw Switch Compatible with Ryobi 089110109712, Replacement Parts Compatible with Ryobi 10 inch Table Saw, Power Tool Switch 120V/250V

【 TABLE SAW SWITCH】: The Replacement Paddle Switch for Table Saw,compatible with Ryobi Table Saws. The product is not sponsored or endorsed by Ryobi..
【VOLTAGE】: Emergency stop switch replaces part #: 16102010G, 889110109712 ,452080007 , 984407003 and 984406001..
【 PREMIUM QUALITY】: This safety locking switch is made of high quality durable plastic.They are approved by UL, TUV, CSA, CE, ETL standards and they fit most of the power tools on the market..
【 COMPATIBLE WITH】: Table saw switch is compatible with Ryobi BS1001SV 10" Band Saw, BS902 9" Band Saw, BS903 9" Band Saw,BTS15 10" Table Saw, BTS20 10" Portable Table Saw, BTS20R 10" Table Saw, BTS20R-1 10" Table Saw, BTS21 10" Table Saw.
【 COMPATIBLE WITH】: Compatible with DP120 12" Drill Press, OSS500 Osclillating Spindle Sander,BTS16 10" Table Saw, RTS30 10" Portable Table Saw, RTS20 Portable Table Saw with Quick Stand, RTS10 10" Table Saw, BTS211 10" Table Saw, RTS21 10 in. Table Saw, RTS21G RTS21G 10-In. Table Saw.

Check Stock

Milwaukee 48-00-5026 The Ax 9-Inch 5 TPI Reciprocating Saw Blades, 5-Pack

➤【BEST IN CLASS 】- Our wood pruning reciprocating saw blades with Outstanding pruning ability of fast cutting speed, longer lifetime, precise and smooth cut..
➤【EFFORTLESS CUTTING】 - Built using the most advanced alloys and tooth designs, smoother cuts, suitable for outdoor fast rough cutting of wood and pruning..
➤【DURABLE & ROBUST】 - High quality heat-treated chrome vanadium steel makes our sawzall blades extremely durable for wood and pruning, much longer lifetime than HCS reciprocating saw blades..
➤【VERSATILE APPLICATION】 - Our pruning reciprocating saw blades are suitable for outdoor garden pruning, wood cutting, tree pruning, and plastic pipes cutting..
➤【UNIVERSAL SHANK】 - EZARC wood sawzall blade fits all brands of reciprocating saw tools such as DeWalt, Bosch, Makita, Black & Decker, Milwaukee, Porter Cable, Skil, Ryobi, Hitachi, Metabo and more..

Check Stock

DYRABREST 110V 60HZ Mini Table Saw Micro Cutting Machine Portable Chop Saw for Soft Material Thin Stain-less Steel Sheet and Iron Sheet (9000R/Min)

Application range: can cut soft metal, wood, plastic, acrylic, bam-boo material, handmade, etc..
▶Micro Cutting Machine Features: The motor can use strong power for a long time and easily cut all kinds of soft materials. The machine height adjustment button can effectively control the distance between the blade and the table. Working and running, the noise is around 80 minutes..
▶High Quality: Mini table saw is a small, lightweight saw and its compact size and easy portability make it the great tool for small projects and tight spaces. The saw's precision-machined aluminum table and fence make it accurate and durable, while the detachable blade system makes it easy to upgrade or change out the saw's blade..
▶Application Range: Micro Cutting Machine is a mini desktop router, it is very easy to operate and has a wide range of applications. It can cut soft metal, wood, plastic, acrylic, bam-boo material, and so on..
▶Packing list: Cutting machine*1+Saw blade*1+Adapter (including plug) *1.If you have any questions or concerns, please feel free to contact us. We will always support our products and provide you with the most suitable solution..

Check Stock