ReviewsHitow Trailer Hitch Tighteners

CURT 45134 Fusion Trailer Hitch Mount with 2-Inch Ball & Pin, Fits 2-In Receiver, 7,500 lbs, 2\ Drop , black

  • DEPENDABLE STRENGTH. Rated to tow 7,500 pounds gross trailer weight and 750 pounds tongue weight, this welded, one-piece ball hitch offers dependability for your towing (limited to lowest-rated towing component).
  • VERSATILE USE. This trailer hitch ball mount comes with a 2-inch x 2-inch shank to fit virtually any industry-standard 2-inch receiver. The ball mount also has a 2-inch drop to promote level towing with your own particular vehicle-trailer setup.
  • SECURE TOWING. Hitching up your trailer is easy with this ready-to-use trailer hitch ball mount. It comes with a welded 2-inch diameter tow ball for ready coupling and a trailer hitch pin to securely mount onto your hitch receiver.
  • CORROSION-RESISTANT. For long-lasting use, this ball hitch is protected with a durable black powder coat finish, and the trailer ball has a polished chrome plating. These finishes resist damage from rain, dirt, snow, road salt and other corrosive threats.
  • EASY TO INSTALL. To install the trailer hitch ball mount on your vehicle, simply insert the shank into your vehicle's 2-inch hitch receiver. The rounded shank, included hitch pin and welded trailer ball make installation easy.
Check Stock

Colorado State Flag Trailer Hitch Cover Plug CO

  • USA flag Trailer Hitch Cover Plug Insert, Fits standard 2" trailer hitch receivers *Hitch pin not included..
  • The Trailer Hitch Cover Made of Carbon Steel, the emblem made of Aluminum..
  • Keep your trailer hitch's receiver tube clean and protected when not towing..
  • Trailer hitch tube cover universal fit any 2" class 3 III and cass 4 IV 5 V receivers.
Check Stock

CURT 45036 Trailer Hitch Mount with 2-Inch Ball & Pin Fits 2-in Receiver 7,500 lbs 2 Drop GLOSS BLACK POWDER COAT

  • DEPENDABLE STRENGTH. Rated to tow 7,500 pounds gross trailer weight and 750 pounds tongue weight, this ball hitch offers dependability for your towing setup (weight capacity may change if trailer ball is removed).
  • VERSATILE USE. This trailer hitch ball mount comes with a 2-inch x 2-inch shank to fit virtually any industry-standard 2-inch receiver. The ball mount has a 2-inch drop, 2-inch diameter ball, 5/8-inch pin hole and 8-1/4-inch overall length.
  • READY TO TOW. Hitching up your trailer is easy with this ready-to-use trailer hitch ball mount. It comes with a pre-attached tow ball for ready coupling and a trailer hitch pin to securely mount onto your hitch receiver.
  • CORROSION-RESISTANT. For long-lasting use, this ball hitch is protected with a durable black powder coat finish, and the trailer ball has a polished chrome plating.
  • EASY TO INSTALL. To install the trailer hitch ball mount on your vehicle, simply insert the shank into your vehicle's 2-inch hitch receiver. The rounded shank, included hitch pin and pre-torqued trailer ball make installation easy.
Check Stock

CURT 45372 Forged Trailer Hitch Mount with 2-5/16-Inch Ball & Pin, Fits 2-1/2-Inch Receiver, 20,000 lbs, 4-in Drop , Black

  • DEPENDABLE STRENGTH. Rated to tow 20,000 pounds gross trailer weight and 2,000 pounds tongue weight, this ball hitch offers dependability for your towing setup (weight capacity may change if trailer ball is removed).
  • VERSATILE USE. This trailer hitch ball mount comes with a 2-1/2-inch x 2-1/2-inch shank to fit virtually any industry-standard 2-1/2-inch receiver. The ball mount has a 4-inch drop, 2-5/16-inch diameter ball and 5/8-inch pin hole.
  • READY TO TOW. Hitching up your trailer is easy with this ready-to-use trailer hitch ball mount. It comes with a pre-attached tow ball for ready coupling and a trailer hitch pin to securely mount onto your hitch receiver.
  • CORROSION-RESISTANT. For long-lasting use, this ball hitch is protected with a durable black powder coat finish, and the trailer ball has a polished chrome plating.
  • EASY TO INSTALL. To install the trailer hitch ball mount on your vehicle, simply insert the shank into your vehicle's 2-1/2-inch hitch receiver. The rounded shank, included hitch pin and pre-torqued trailer ball make installation easy.
Check Stock

CURT 45155 Fusion Trailer Hitch Mount with 2-Inch Ball & Pin Fits 2-In Receiver 7,500 lbs 2 Rise black

  • DEPENDABLE STRENGTH. Rated to tow 7,500 pounds gross trailer weight and 750 pounds tongue weight, this welded, one-piece ball hitch offers dependability for your towing (limited to lowest-rated towing component).
  • VERSATILE USE. This trailer hitch ball mount comes with a 2-inch x 2-inch shank to fit virtually any industry-standard 2-inch receiver. The ball mount also has a 2-inch rise to promote level towing with your own particular vehicle-trailer setup.
  • SECURE TOWING. Hitching up your trailer is easy with this ready-to-use trailer hitch ball mount. It comes with a welded 2-inch diameter tow ball for ready coupling and a trailer hitch pin to securely mount onto your hitch receiver.
  • CORROSION-RESISTANT. For long-lasting use, this ball hitch is protected with a durable black powder coat finish, and the trailer ball has a polished chrome plating. These finishes resist damage from rain, dirt, snow, road salt and other corrosive threats.
  • EASY TO INSTALL. To install the trailer hitch ball mount on your vehicle, simply insert the shank into your vehicle's 2-inch hitch receiver. The rounded shank, included hitch pin and welded trailer ball make installation easy.
Check Stock

CURT 45152 Fusion Trailer Hitch Mount with 1-7/8-Inch Ball & Pin, Fits 2-Inch Receiver, 5,000 lbs, 2-In Rise

  • DEPENDABLE STRENGTH. Rated to tow 5,000 pounds gross trailer weight and 500 pounds tongue weight, this welded, one-piece ball hitch offers dependability for your towing (limited to lowest-rated towing component).
  • VERSATILE USE. This trailer hitch ball mount comes with a 2-inch x 2-inch shank to fit virtually any industry-standard 2-inch receiver. The ball mount also has a 2-inch rise to promote level towing with your own particular vehicle-trailer setup.
  • SECURE TOWING. Hitching up your trailer is easy with this ready-to-use trailer hitch ball mount. It comes with a welded 1-7/8-inch diameter tow ball for ready coupling and a trailer hitch pin to securely mount onto your hitch receiver.
  • CORROSION-RESISTANT. For long-lasting use, this ball hitch is protected with a durable black powder coat finish, and the trailer ball has a polished chrome plating. These finishes resist damage from rain, dirt, snow, road salt and other corrosive threats.
  • EASY TO INSTALL. To install the trailer hitch ball mount on your vehicle, simply insert the shank into your vehicle's 2-inch hitch receiver. The rounded shank, included hitch pin and welded trailer ball make installation easy.
Check Stock

CURT 45131 Fusion Trailer Hitch Mount with 1-7/8-Inch Ball & Pin, Fits 2-Inch Receiver, 5,000 lbs, 2-In Drop

  • DEPENDABLE STRENGTH. Rated to tow 5,000 pounds gross trailer weight and 500 pounds tongue weight, this welded, one-piece ball hitch offers dependability for your towing (limited to lowest-rated towing component).
  • VERSATILE USE. This trailer hitch ball mount comes with a 2-inch x 2-inch shank to fit virtually any industry-standard 2-inch receiver. The ball mount also has a 2-inch drop to promote level towing with your own particular vehicle-trailer setup.
  • SECURE TOWING. Hitching up your trailer is easy with this ready-to-use trailer hitch ball mount. It comes with a welded 1-7/8-inch diameter tow ball for ready coupling and a trailer hitch pin to securely mount onto your hitch receiver.
  • CORROSION-RESISTANT. For long-lasting use, this ball hitch is protected with a durable black powder coat finish, and the trailer ball has a polished chrome plating. These finishes resist damage from rain, dirt, snow, road salt and other corrosive threats.
  • EASY TO INSTALL. To install the trailer hitch ball mount on your vehicle, simply insert the shank into your vehicle's 2-inch hitch receiver. The rounded shank, included hitch pin and welded trailer ball make installation easy.
Check Stock

CURT 21728 Rubber Trailer Hitch Cover with 4-Way Flat Wiring Holder, Fits 2-Inch Receiver

  • RELIABLE PROTECTION. Trailer hitch covers are the ideal way to protect your hitch receiver when not towing. It protects the receiver against dirt, water, debris and rust, while adding a finished look to your vehicle.
  • WIRING HOLDER. This trailer hitch receiver cover comes with an integrated holder bracket to securely and conveniently mount your vehicle's 4-way flat trailer wiring connector, keeping it protected and on-hand whenever needed.
  • STANDARD FIT. CURT trailer hitch covers come in industry-standard sizes to fit virtually any trailer hitch receiver. This hitch cover is designed to fit a 2-inch x 2-inch receiver tube, perfect for most class 3, class 4 and class 5 hitches.
  • CONVENIENT. To eliminate the need for tools or additional components, this trailer hitch cap installs with a friction fit. There is no need for a hitch pin or clip.
  • LONG-LASTING. This trailer hitch cover is made from quality black rubber, meaning it will never rust or corrode, in spite of frequent exposure to rain, snow, mud and other elements.
Check Stock

CURT 21500 Trailer Hitch Pin & Clip, 5/8-Inch Diameter, Fits 2-Inch Receiver

  • VERSATILE. The 5/8-inch diameter of this hitch pin is compatible with any ball mount or other trailer hitch accessories with a 2-inch shank and 5/8-inch pin hole, making this receiver hitch pin a perfect fit for most class 3, 4 and 5 trailer hitches.
  • EASY TO GRIP. The 105-degree bend in this trailer hitch pin creates a useful handle for easier use and allows the pin to stay securely engaged in the trailer hitch and ball mount.
  • CORROSION-RESISTANT. Protected by a durable zinc-plated finish, this tow hitch pin maintains excellent resistance to rust and corrosion for longevity and hassle-free use every time.
  • HIGH-STRENGTH. This 5/8-inch trailer hitch pin is made out of solid steel for reliable strength, safety on the road and confidence with every mile of your adventure.
  • SIMPLE TO INSTALL. To install this trailer hitch pin, simply insert your ball mount or other hitch accessory into the receiver on your vehicle. With the pin holes in the side of the receiver tube lined up, insert the hitch pin. Then, install the clip.
Check Stock

Sulythw Trailer Hitch Ball Mount, Towing Hitches with 2 Inch Ball, 7,500 lbs Trailer Hitch Receiver Standard Class Ⅲ, 2\ Drop and 1/2\ Rise

  • Which Ball Mount Do I Need? First determine if you need an Hitch Drop or Rise, the size of your Trailer Hitch Receiver, and last, the weight capacity of the gross trailer. Our Ball Mount has a 2 inch drop, fits 2-in Receiver and 7,500 lbs, with a 2 inch ball. Confirm these figures and you'll find a suitable Trailer Hitch Ball Mount..
  • Trailer Hitch Rated to tow 7500 pounds gross trailer weight and 750 pounds tongue weight. Ball is stamped the suggested 5000 pounds..
  • Ball mount has a 2 inch drop, 2 inch diameter ball, 0.7 inch pin hole..
  • 2 inch hitch ball, an excellent choice for towing most small boat trailers, utility trailers, pop up campers and some recreational vehicle trailers used for hauling dirt bikes, motorcycles and ATVs (NOTE: Do not exceed the maximum load capacity of 7500lb for any towing component.
  • Ball hitch offers dependability for your towing setup, engineering strong steel and precise welding, our trailer hitch extenders receive a gloss black powder coat for ongoing prevention of rust, corrosion..
  • Simple Installation: There is a pre-attached tow ball for ready coupling, and a trailer hitch pin to securely mount onto your hitch receiver..
Check Stock

CURT 45048 Trailer Hitch Receiver Adapter Reducer, 2-1/2 to 2-Inch, 34-In Extension, 4,500 lbs , Black

  • VERSATILE ADAPTER. This trailer hitch adapter easily inserts into your trailer hitch receiver whenever needed to adapt it from one size to another. This hitch adapter fits a 2-1/2-inch receiver and accepts a 2-inch shank.
  • ADDED CLEARANCE. This hitch receiver adapter also functions as a trailer hitch extension, adding 34 inches of extra length to your hitch receiver. It can also be trimmed to as little as 24 inches.
  • STANDARD FIT. This trailer hitch receiver adapter has a 2-1/2-inch x 2-1/2-inch shank to fit any industry-standard 2-1/2-inch trailer hitch receiver. It accepts an industry-standard 2-inch shank. It is equipped with built-in safety chain loops.
  • SOLID STRENGTH. This hitch receiver adapter is rated for 4,500 lbs. GTW and 450 lbs. TW (6,000 / 600 lbs. at 24 inches). It can also be used with a weight distribution hitch for 6,000 lbs. WD and 600 lbs. WDTW (8,000 / 800 lbs. at 24 inches).
  • CORROSION-RESISTANT. This trailer hitch reducer is finished in a highly durable black powder coat to withstand rain, dirt, UV damage and other corrosive threats.
Check Stock