ReviewsHolding Tool

NexADD Fan Clutch Wrench Set 32mm & 36mm Water Pump Holder Tool Fit for BMW Ford GM Chevrolet,Fan Clutch Nut Wrench Set,Fan Clutch Removal Tool,Water Pump Pulley Holder,Clutch Fan Removal Tool Kit

REMOVE & REINSTALL AUTOMOTIVE FAN CLUTCHES ★- The NexADD 32mm & 36mm Fan Clutch Wrench Kit with Fan Pulley Holding Tool removes lock nuts on temperature-dependent thermo-viscous fans. The holder bar keeps the water pump pulley in place while loosening the radiator fan. It is a direct replacement and completely fit, wich could help you save much money..
FITS YOUR VEHICLE★-The NexADD Fan Clutch Wrench Set is compatible with BMW vehicles, including, but not limited to,the following applications: fan clutch wrench tool is kit compatible with BMW M4 M10 M20 M30 M40 M44 M50 M52 M52TU M54 M56 M60 M70 M73 S14 S38 S54 S50B30 S50B32 and compatible with Ford.Also compatible with some Ford, GM, and Chevy models..
BUILT TO LAST★- The 15" fan clutch wrench and holder are specially lengthened to provide extra leverage with sure grip when working on hard-to-get-to fan clutch nuts on metric thermo-viscous fans, letting you service your timing or water pump quickly and easily. The rubber handle covered in the middle helps prevent hand fatigue during prolonged us..
EASY TO USE ★- Attach the pulley holder bar with your bolts inserted through the holes, lock into place on water pump face, place wrench on fan clutch nut, and loosen the fan clutch nut by turning clock....

Check Stock

Milwaukee 49-16-2720 M18 FUEL QUIK-LOK 10 in. Pole Saw Attachment

Pole Mount - Designed for holding Pole Saws, this 5 piece set includes a saw scabbard, handle rack and 3 ratcheting straps. It has everything you need to safely secure your pole saw tool so you can do your trimming and cutting work with ease..
Ratcheting System - This 5 part kit mounts to the boom by securely locking the ratchet strap. This helps keep poles tight and secure. This pole trimmer holder works with round and square booms. It provides clearance when tools are not being used..
Universal Size - Designed for holding long reach chainsaws including Fairmont, Altec and Reliable polesaws. Check owner's manual for compatibility before using with other pole saws for tree trimming. This is a great choice for lawn and tree care..
Heavy Duty - Constructed with strong, durable metal materials that hold up over time. The nylon straps have strong, heavy duty webbing with a 1,100 pound load limit. This equipment is a great tool for an electric pole saw or gas powered pole saw..
Set Includes - This 5 piece set comes ready to go right out of the box. It can be installed in seconds. It includes: (1) 30-1/2 x 5-1/4 inch scabbard with 14-1/2 x 4 inch holding case.
(1) 8 x 4-1/2 inch handle rack and (3) locking ratchet straps..

Check Stock

ER11 CNC Collet 3Pcs 1/8 inch 3.175mm 4mm 6mm Spring Collet Workholding Engraving Collet Milling Lathe Tool

☑【Description】-These spring collets are made of high quality 65Mn spring steel for CNC milling lathe tool and work-holding engraving machine..
☑【High Quality】-This Spring Collet Fine workmanship, good elasticity, high precision and run-out tolerance is less than 0.008mm..
☑【Convience】-Each collet is marked clearly so you can easily distinguish them..
☑【Best Choice】-Great collet for CNC milling lathe tool and work-holding engraving machine..
☑【Note】-Collet must be placed into collet chuck nut before inserting into collet chuck..

Check Stock

2'' Tactical Tape Measure Belt Holster Measuring Tape Holder Tapes Pocket Clip Hook

Tape Measure Holder: The tape measure hook is mainly designed for holding most tape measures. It also works great for holding other hand tools, like small cordless drill and so on..
Heavy Duty Tape Measure Holster: Made by stainless steel tape clip and quality kydex construction, the tape belt holder is durable and strong enough for holding your heavy duty tools. With a tang on the clip bottom that secures it to tool belt and prevents it from dropping..
Extra Wider Tape Measure Clips for 2 inch Gun Belts: Our belt tape clips fit for mostly casual belt and tool belts, it can fits up to 2 inch tactical belt. The tape measure pocket clip can be also attached to your pants, pockets or vests..
Everyday Carry Tactical Measuring Tape Holders: The measure holder weights about 1.69oz, lightweight for everyday carrying. With flat-back clip design, it will not poke you in the hip,more comfortable for your tape daily wearing. The tape holster helps put the tape back on your hip a one handed deal, works both handy for either left handed or right handed..
Great Carpentry Tape Measure Holder Clip: The measuring tape belt clip allows fast assess to tape measure, extremely convenient for carpentry, craftsman, electrician and so on persons who needs carry tape measure all....

Check Stock

ATLIN Bicycle Chain Breaker Splitter Tool for 7 8 9 10 and Single Speed Chains

The chain breaker is specifically designed to remove and install pins in 7, 8, 9, 10 and single speed bicycle chains.
This bicycle chain tool includes a built-in hook for holding the bike chain in place while performing maintenance.
The chain splitter tool is small and lightweight for easy portability.
The bike chain removal tool is crafted from durable, long lasting materials.

Check Stock

Magnetic Wristband，with Strong Magnets for Holding Screws,Nails and Drill Bits,Tool Gifts for Men, Women, Dad ,Husband, Carpenters

STRONG TOOL- Each RIGEYTECH magnetic tool accessory contains 10 powerful magnets embedded in the wristband for holding screws, nails, bolts, washers, and drill bits,more storage space..
MULTI USE- This magnetic screw holder is very suitable for DIY projects such as home renovation, construction, carpentry, auto repair. Just strap it to your wrist, belt, or hang it above the workbench.
ONE SIZE FITS MOST- Our magnetic wrist straps for holding screws and other small tools are equipped with adjustable straps with breathable mesh, which can be worn comfortably according to your needs while working..
TIME SAVER- An extremely good helper, Greatly help you hold all the small metal objects. No worries from searching for small parts in the toolbox or your pockets, fully improving your work efficiency..
DURABLE- RIGERTECH magnetic tool wristband is Embedded with 10 super strong magnets, come with two pockets. It's made of 100% 1680D ballistic polyester, breathable material and lightweight design make this wrist magnetic screw holder perfect for you. The wrist band suit for everyone !.

Check Stock

Amazon Basics Locking Pliers - Welding Clamp 9-inch

9-inch locking pliers and welding clamp tool for welding applications and securing holding awkwardly shaped items.
Includes (1) 9-inch locking pliers and welding clamp tool made of alloy steel with a rust-resistant nickel-plated finish.
U-shaped jaws offer better visibility and more space to work.
Screw-adjustable locking mechanism ensures ultimate locking force.
Classic trigger release quickly and effortlessly unlocks the tool.

Check Stock

Dremel EZC483 1/32-Inch EZ Change Collett for the Dremel 4200

Unique designed replaceable collet for 4200 Rotary Tool with EZ Change mechanism This collet cannot be used in any other Dremel rotary tools.
Grooves designed around the outside diameter to identifies collet size (see 4200 Tool Manual for reference).
Provides the optimal grip for holding a bit in a Dremel 4200 rotary tool.

Check Stock

PSI Woodworking LCWIZSK Carbide Wizard Super Skew Chisel

All the benefits of a traditional skew with the results of a carbide tipped chisel. Overall length is 13. 5". Blade is 4" long. Includes a wrench for the tip screw and instructions. Replacement tip screw and wrench (LCWIZSY) are available..
Gentle 2" Radius edge and angled blade works closer to the slicing action of a traditional skew, lowering the stress on the turning material and tool. Slices through wood or acrylic for smooth, clean cuts. Reduces chipping. Less sanding needed..
Super sharp 4-sided replaceable carbide tip (LCWIZSX). ergonomic handle. Will wiz through wood and acrylic for faster results and eliminate the need for sharpening. The angled blade provides a consistent holding position..
Designed to solve a recurring issue with carbide chisels.
almost all carbide chisels are scrapers..
While the blade on a scraper maintains a sharp edge, the method of holding the blade causes the edge to drag across surface of material, which can promote tool chatter, chipping, and shattering of turning materials..

Check Stock

Husky 6 in 6-Compartment Semi-Transparent Heavy-Duty Waterproof Storage Bin Small Parts Organizer

SMALL TOOL BAG: husky tool bag small 3-bag combo is ideal for holding small parts, pens, pencils, utility knives and other small essentials. Each....
MATERIAL: Tool bag constructed of durable canvas with zippered closures. Carabineer included for quick-clip storage..
MESH WINDOW: Tool kit bag features front mesh insert to view contents of the bag. Heavy-duty mesh windows..
DIMENSIONS: Tool bags and pouches measure 8.5" L x 6" W, 7.5" L x 5.5" W, and 6.5" L x 5" W..
IDEAL FOR: Tool Bags is great for electrical, electrician, construction, contractor, carpenter, framer, plumber, and handyman..

Check Stock

Fiskars Eyelet Setters, 3 Piece Set (12-31337097)

Punch hole and set eyelets quickly and easily with one tool, no hammer needed.
Just pull up on one side while holding the other and let the spring action do the work for you.
Three sized included: 1/16", 1/8", 3/16".

Check Stock