ReviewsHole Diameter

JINGLING 100mm 4\ inch Tile Diamond Hole Saw Drill Bits for Glass Stone Ceramic

  • The diamond coated hole saw suitable for use in drill hole on glass, marble, tile or granite.
  • Use with water as a lubricant, holes require No futher work as cutting is clean.
  • Start drill at 45 degree to surface and align to 90 degree as hole forms.
  • Product Name: diamond hole saw, diamond drill bit for tile, hole saw ceramic tile.
Check Stock

JINGLING 63mm 2-1/2\ inch Diamond Drill Bit Tile Hole Saw for Glass Ceramic Stone

  • Product Name: diamond hole saw, diamond drill bit for tile, hole saw ceramic tile.
  • The diamond coated hole saw suitable for use in drill hole on glass, marble, tile or granite.
  • Use with water as a lubricant, holes require No futher work as cutting is clean.
  • Start drill at 45 degree to surface and align to 90 degree as hole forms.
Check Stock

Heyiarbeit 10pcs Hole Plugs 3/4 / 19mm Nylon Plastic Round Snap in Type Locking Hole Tube Furniture Fencing Post Pipe Insert End Caps White Tone

  • [Material] - The hole plug is made of high-quality engineering plastic material, with good cushioning and vibration reduction performance, soft texture, light weight, wear-resistant and durable, and good waterproof and dustproof sealing.
  • [Easy to Use] - The hole plug is easy to install and use and can be completed without special tools. Choose the correct size plug according to the diameter and thickness of the hole and press it into the hole.
  • [Application] - Plastic hole plugs are mainly used to cover, hide and decorate holes, and are widely used in steel furniture, table and chair legs, cabinets and electric boxes reserved holes, outdoor equipment, etc.
  • Also can be used as waterproof plugs, sealing plugs, test tube plugs, rubber bulkheads, caps, cylinder plug heads, threaded rubber plugs.
  • Note: All sizes are measured by manual, please allow 0.5-1mm deviation.
  • Please check the hole plug size you need before buying, it may easily fall off if your panel is too much thicker than the plug.
Check Stock

4 Pcs Flange Two Hole Pin - Stainless Steel- 1-1/8'' 1-5/8'' Diameter

  • 【Set 2 Hole Pins】1-1/8'' Diameter, work with Bolts Holes Recommended 3/8'' to 1.0''.
  • 【Set 2 Hole Pins】1-5/8'' Diameter, work with 1/2 '' to 1-1/2'' Bolt Holes Up to 3'' Thickness of Flange.
  • 【Easy installation】The 2 hole pins pipe fitting tools is ergonomically designed for lightweight construction and easy installation with removable threads to accommodate different lengths. By using this two hole flange alignment pin set, you can easily install and level the pipe.
  • 【Package Included】4Pcs/1set, 1-1/8'' two hole pins and 1-5/8'' 2 Hole Pins.(As the picture shows).
  • 【Note】Professional installation is highly recommended (No Instruction Included).For any needs please contact us and got an reply within 24 hours.
Check Stock

RHKING Two Stage Auger Adapter Precision Durable Alloy Steel for use with Auger Drill

  • ✅ APPLICATION:The adapter allows you to use your Power drill with Auger Drill. Suitable the 3/4 inch internal diameter of the auger shaft and 7/8inch internal diameter of the auger shaft..
  • ✅ MANUFACTURE:Auger adapter are made of alloy steel with high strength, Quenching treatment, being hard chrome plated and good wearing resistance. good impact resistance and good deformation resistance..
  • ✅ SIZE:Auger adapter Overall Length: 5inch,Body Diameter: 0.71inch and 0.86inch.Bolt hole is 0.25inch hole and 0.31 inch hole. Fits drill chucks 1/2 inch and larger..
  • ✅ EASY TO USE:Three flat milled sides to fit in 1/2 inch drill chuck,flat surfaces large enough，Longer shank for the Power drill to clamp securely without slipping..
  • ✅ DIY DESIGN:If you use it for an ice auger, you can DIY make a Auger Stop plate, install it on the step of the adapter, and clamp it with the inner hole internal diameter 5/8 Shaft Collar, so as to prevent the auger from falling into the water..
Check Stock

OMB Warehouse Pit Parts Split Sprocket - 60 Tooth - 35 Chain

  • ✿【Compatibility】Will fit perfectly with Go Carts and Mini Bikes and work with #40/41/420 Chain. Great alternative and very easy to install. Fit up to Wheels with the Same 4 Bolt Pattern..
  • ✿【Product Dimensions】60 Tooth sprocket with 9-3/4" Overall diameter - 1-5/8" Central hole diameter - 3/8" Mounting hole diameter - 3-1/8" Mounting hole distance (across) - 2-1/4" Mounting hole distance (side-by-side) - 3.4 lbs Weight..
  • ✿【Premium Materials】The Go-kart Sprocket is designed with 4 holes and 60 tooth. Made of high quality steel, Strong and will not wear out easily, it has a long service life and can even serve you all the time..
  • ✿【100% Satisfaction Guarantee】You can decide the quality and performance. If you are not satisfied with your purchase for any reason, simply contact us for our 100% satisfaction guarantee, which means there is no risk for you to try today!.
Check Stock

Flange Wizard 42050-TL Large Threaded Two Hole Pins, 1/2" - 1-15/16"

  • 【Set 2 Hole Pins】1-1/8'' Diameter, work with Bolts Holes Recommended 3/8'' to 1.0''.
  • 【Set 2 Hole Pins】1-5/8'' Diameter, work with 1/2 '' to 1-1/2'' Bolt Holes Up to 3'' Thickness of Flange.
  • 【Easy installation】The 2 hole pins pipe fitting tools is ergonomically designed for lightweight construction and easy installation with removable threads to accommodate different lengths. By using this two hole flange alignment pin set, you can easily install and level the pipe.
  • 【Package Included】4Pcs/1set, 1-1/8'' two hole pins and 1-5/8'' 2 Hole Pins.(As the picture shows).
  • 【Note】Professional installation is highly recommended (No Instruction Included).For any needs please contact us and got an reply within 24 hours.
Check Stock

Mason Jar Lids with Straw, ECO Reusable Bamboo Lids, Wide Mouth Mason Jar Tumbler Lids, Mason Jar Tops with 2 Reusable Stainless Steel Straw - 2 Packs

  • ...on Jar Drinking Compatibility – With the detachable silicone ring below, the bamboo lid is flexible to fit wide mouth mason Jar, and other canning jars perfectly, like Ball, Kerr and Bernadine. The wide mouth jar lid can also work with smoothie cup, Mason jar Coffee Mug & Boba Cup, Mason drinking jar with 72-82mm diameter mouth..
  • ♻️Safe and Reusable – All items in the package are easy to clean and reusable. With a diameter 15mm straw hole, the bamboo lids are compatible with any straw smaller than 13mm. The straws can also work with any lid with larger straw hole. All those compartments are BPA, phthalate and PVC free..
  • ♻️Work with Mason jar Coffee Mug & Boba Cup – Differ from other plastic or stainless steel lids, this bamboo mason jar lid is made of pure natural material. Taken from naturally grown bamboo, this bamboo lids are light, and not easily deformed. It is great for coffee mason jar. Please clean and keep dry every time after using..
  • ♻️Design for Mason Jar – Mason jar lids: Bamboo Mason jar lids with straw hole: diameter 88 mm with same 15mm straw hole. Bamboo straw: length 200-230mm. Stainless steel straw: Size L length 240mm, diameter 12mm.
  • Size S length 210mm, diameter 8mm. Silicone straw: length 250mm, diameter 11mm..
Check Stock

Ocean Mist 360 RGB LED Color Changing Floating Fountain Pump & Light Ring with 66' Cords

  • Ring inside step diameter: 4" Ring inside hole diameter: 1 3/4".
  • Center fixture hole: 1.5"(Max. nozzle or pipe diameter).
  • 12VAC Transformer with 65' cord included. Pump size: 10"(L) x 6"(W) x 7"(H), tube connector 1"(diameter) Pump Output 1584 gph, 190W, cable length 65 ft..
Check Stock

YXQ AC 400V 200A Double Pole Electric Brake Open Type Safety Knife Switch DPST

  • Installing Hole Diameter : 6.4mm / 0.25”.
  • Installing Hole Distance(Center) : 137mm / 5.39”.
  • Thread Diameter for Connecting Cable : 7.7mm / 0.3'.
  • Size(approx.) : 160 x 115 x 100mm / 6.3' x 4.5' x 3.9' (L*W*H).
Check Stock

EUDAX 82 pcs Plastic Gear Package Kit DIY Gear Assortment Accessories Set for Toy Motor Car Robot Various Gear Axle Belt Bushings

  • The Gear Package included: spindle, single/double crown gear, pulley, rack, bevel gear, copper gear, bushings, axles, tires, rubber bands and so on, more accessories that you need for diy toy cars/robots/motors..
  • Axle length of 30mm, 50mm, 70mm, 100mm, shaft diameter is 2mm, 2pcs / kind, for a total of 8 Pcs.
  • Five wheel wheels: outer diameter 30mm, inner hole 2mmfor a total of 4 Pcs.
  • The characteristics of gear: 36MM yellow 2mm hole belt wheel, rack, four-wheel drive, 28 tooth 2mm hole Fan teeth and 30-100mm gear axle, five wheel wheel diameter 30mm!Multi-uses, you can use it to fix the toys,Great for diy science and small production, product design and mechanical model..
  • Most gear is 2mm aperture (tight or loose), in addition to one 81.5A spindle hole is 1.5mm, there are 2 crown is 2.5mm, there are 1 crown gear C303A is 3mm, one 15 teeth 2.3mm hole and 3.17mm hole..
Check Stock