ReviewsHole Plug Assortment Kit

Phillips Pan Head Self Tapping Sheet Metal Screws Zinc Plated Assortment Kit - 1421 Pcs!

  • 1421 Pieces - Phillips Pan Head Self Tapping Sheet Metal Screw Assortment Kit!.
  • #6, #8. #10, #12, #14 Diameters Included.
  • Includes: Durham 24 Hole Steel Compartment Tray (Made USA) Dim: 13-3/8"x9-1/4"x2".
Check Stock

TKIAEA Rubber Grommet 53 Pcs, 6 Sizes Double Sided Round Rubber Hole Plug Kit, 5/8' 13/16' 7/8' 1' 1-3/16' 1-1/2', Firewall Plug Grommet, for Protecting Cable Wire Hole Plug

  • Material: rubber grommets are made of high-quality rubber material, wear-resistant, corrosion-resistant, with strong insulation protection, dustproof, flame retardant, and good safety..
  • Size: grommets assortment kit available in 6 different sizes including 10pcs 5/8" Drill Hole, 10pcs 13/16"Drill Hole, 10pcs 7/8"Drill Hole, 10pcs 1" Drill Hole, 8pcs 1-3/16" Drill Hole, 5pcs 1-1/2" Drill Hole, and 1 telescopic cutter.
  • Usage: firewall grommets protect or cover holes and are suitable for electrical cabinets, to protect cables and wires from scratching.
  • Features: double-sided rubber gaskets are easy to use, cut from the center and inserted into the cable to prevent the wire from rubbing against the metal.
  • Package: 53 rubber grommets for wiring, packaged in a clear plastic case for your storage and use.
Check Stock

MCIGICM Potentiometer Assortment 1K 5K 100K 10K Ohm Breadboard Trim Potentiometer kit with Knob for Arduino

  • ☛ High Quality 3296W Multiturn Trimmer Potentiometers Assortment Kit..
  • ☛ Model : 3296W, Mounting Type: Through Hole (DIP), Resistive Material : Cermet..
  • ☛ Package Include: 60pcs, The Package Contains 12 Values of Each 5pcs, Packed in A Rugged Convenient Re-sealable Plastic Storage Case..
  • ☛ The Kit Resistance Value Include: 100Ω, 1KΩ, 10KΩ, 100KΩ, 200Ω, 2KΩ, 20KΩ, 200KΩ, 500Ω, 5KΩ, 50KΩ, 500KΩ.
  • ☛ Use for Device Interior or Printed Circuit Boards Which Adjustable the Resistance Less..
Check Stock

VIKITON Hole Saw Kit for Metal and Wood Plastic Project, Bi-Metal Hole Saw Set with Case from 7/8'' to 2-1/2'', Hole Cutter with Flat and Smooth Cutting Drilling Edge, Fast Chip Removal

  • Long Service Life : Hole Saw Kit, Bi-metal construction , special flexible steel saw body and high speed steel cutting teeth , for long service life , rust proof , great corrosion and heat resistance..
  • Superior Versatile Performance : High speed steel sharp cutting teeth effectively drills through metal , wood , PVC board , plastic and drywall , clean and smooth , high precision ..
  • Kit Includes: 7/8’’ , 1-1/8’’ , 1-3/8’’ , 1-3/4’’ , 2’’ , 2-1/2’’ hole saws , 1 pilot drill bits for replacement, 1 big arbor (1 drill bit), 1 small arbor (1 drill bit), 1 hex key..
  • High Efficiency : The deep gullets on the sides of hole saw provides fast chip removal , and the geometry funtional slot on the bottom of hole saw provides easy plug removal ..
  • Storage Conveniently : Kit box included for easy storage and carry , free of worry about losing small parts in the kit after handling, handy kit..
  • Suitable for: This kit is high performance cost ratio tool set, easy to operate, very suitable for DIYers to do some normal project around house and yard..
Check Stock

Cooler Drain Plug Replacement Kit, 1.5 " Shaft Length, for 50 58 & 82 Qt Xtreme Coolers, Cooler Parts, Replacement Quality Durable Standard Drain Plug Assembly. Drain Plug Compatible with Most Cooler.

  • QUALITY RAW MATERIALS - Cooler Drain Plug Replacement Kit Made of Quality ABS Plastic, Strong and Durable, Not Easy to Corrode..
  • COMPATIBLE MODELS - Cooler drain plug Compatible with Coleman 50 58 and 82 Quart Xtreme Coolers. You Need to Double Check the Cooler Drain Plug Hole Size and Cooler Wall Thickness As This is Not a Generic Cooler Drain Plug..
  • PACKAGE INCLUDES - 1.5 " Shaft Length Drain Spout x1, Drain Cap, x1, Gasket x1, Reusable Packaging x1..
  • EASY AND FAST INSTALLATION - You Can Easily Replace the Damaged Cooler Drain Plug. the Cooler Drain Plug Replacement Kit Contains the Parts You Need to Replace, Which Are Convenient and Quick and Can Also Be Stored As a Spare..
  • QUALITY AFTERSALES - With Fast Response and Quality Customer Service, We Are Committed to Providing Each Customer with a Practical Cooler Drain Plug Replacement Kit. if You Have Any Questions, Please Feel Free to Contact Us..
Check Stock

WoWSupM 6-3/8 ,4-3/8 inch Recessed Light Installation kit Carbide Grit Hole Saw Cutting Drywall, Ceilin Tile　for 6” ,4”Lights

  • 【Package】The Carbide grit hole saw Installation light kit includes:1pcs of 4-3/8”, 1pcs of 6-3/8" carbide drill bits(Black or Red), 1pcs of 0.43” hex shank arbor, 2pcs of Ø0.25”x 3.5" HSS pilot drill bits..
  • [Application] This Carbide grit installation light hole saw kit is For 4”, 6” recessed light, Cutting Drywall, Plaster, Ceiling ,Corn Hole Board, Acoustical Tile. Cutting depth: Up to 1” ..
  • [Advantage 1] The carbide grit teeth hardness over 80HRC.It is more sharp ,hard. It’s a longer life in abrasive material..
  • [Advantage 2] The specially back removes the plug easily. It’s faster than bi-metal hole saw 2 times..
  • [Advantage 3] The specially sharp teeth cuts more smooth,clean . It is more faster than tradition carbide grit hole saw up to 30%. It is more faster than tradition bi-metal hole saw up to 50%..
Check Stock

DIABLO Bi-Metal and Carbide Tipped Hole Saw Set (9-Piece)

  • The Diablo 9-Piece Hole Saw Kit features five hole saw cups (bi-metal and carbide tipped) and Diablo's four piece SnapLock PLUS mandrel system for quick and easy hole saw cup changes for maximum job performance. This new, high performance hole saw set delivers faster cutting performance and increased productivity versus standard bi-metal and carbide-tipped hole saws. Unlike anything on the market, Diablos hole saws and SnapLock Plus mandrel system simplify the attachment process for fast and efficient hole saw mounting. These radical new hole saws provide ultimate cutting length to bore deeper holes in a single pass.
  • and tool-free plug ejection and Variable Tooth Design for faster cuts..
Check Stock

Motorcycle Rubber Grommets, Motorcycle Rubber + Steel Grommets Kit Replacement Accessories Motorcycle Grommets Kit for Fairings Cowling

  • ...s from the sharp corners or edges on the firewall and the metal panel..
  • High-quality material selection: Motorcycle Grommet Kit is made of rubber and steel, which can effectively ensure maximum durability, reliable and practical in use, and the hole size is about 6 mm/0.24 inches..
  • Direct replacement : Rubber Grommet Assortment Kit can directly replace old or damaged old accessories, install directly, and hold the wires safely and effectively to prevent fire..
  • Easy to install : Rubber Grommet Eyelet Ring Gasket Assortment is simple and convenient to install and disassemble, and it can be buckled and fixed with a single click. The metal panel can create a neat appearance on furniture and electric boxes..
Check Stock

Elesunory 24 Values 240 Pcs Inductors Set I-Shaped Inductor 2.2uH to 100mH Cylindrical Plug-in Inductor Assortment Kit (Black)

  • ...ality】 The plug-in I-shaped inductor uses fine materials, meticulous craftsmanship, compression and corrosion resistance, durable and practical, low energy consumption, stable performance, and each value is produced under strict standards, allowing you to get a perfect product..
  • 【Quality Service】This inductors assortment kit is of good quality. In order to optimize your shopping experience, we provide a 180-day free replacement service. If you have any questions about our products, please feel free to contact us..
Check Stock

IVY Classic 26632 2' Carbide Grit Edge Hole Saw Kit, USA, 1/Card

  • Kit includes carbide grit hole saw, 3/8-inch mandrel and carbide masonry pilot bit.
  • Cuts ceramic tile, marble, slate and fiberglass.
  • Continuous rim of carbide grit ensures smooth cutting.
  • Carbide Grit Hole Saw Made in USA, Diameter 2-inch, Cutting Depth: 1-inch.
Check Stock

Spark Plug Thread Repair Tools, 16Pcs Carbon Steel 14mm x 1.25 Plug Tap Thread Repair Tool Kit M16 Tap W/Rethreading Set with Portable Case

  • For 14mm x 1.25mm Spark Plug Threads :This repair tool kit is suitable for repairing spark plug threads 14mm x 1.25mm..
  • 16 Pcs:This kit has 16pcs highly useful and top quality plug thread repair tools, it is a nice tool kit for repair damaged spark plug threads and lengthen spark plugs service time..
  • Hardened Steel:These tools are made of hardened steel, these accessories are of strong strength and long durability..
  • Easy to Use:With the tap M16 x 1.25 x 70 mm length you can enlarge the spark hole to fit the sleeve..
  • With a Case:All the tools are well organized in a blow molded case to protect the components and easy to carry and collect..
Check Stock