ReviewsHole Saw Bit

4-1/2” Diamond Drill Bits Glass Hole Saw Drill Bit Set for Glass Ceramics Porcelain Ceramic Tile Marble

  • SMALL DRILL BIT: Hole diameter: 115mm(4-1/2"),total length: 56mm(2.2").Package includes 1 pcs 115mm diamond hole saw drill with a transparent box..
  • HIGH QUALITY: Diamond ceramic hole saw are made of industrial grade carbon steel and have a nickel-plated coating to resist corrosion..
  • LARGE CLEARANCE HOLE: These glass hole saw set along the drill bit facilitate the entrance of cooling water and escape of chips and other particles from drilling. Makes the drilling process easier..
  • APPLICATION: Suitable for drilling glass, ceramics, porcelain, ceramic tile, porcelain tile, limestone, marble, light stone and fiberglass..
  • WARM TIPS: Start drill at 45 Degree to surface and align to 91 Degree as hole forms.Water is required to cool down the drill when using them which will greatly extend the life of the bit..
Check Stock

6 Inch Carbide Hole Saw Bit Concrete Hole Saw 152mm Carbide Hole Cutter Drill Stucco Brick Fiberglass Reinforced Plaster And Ceramic Tile Saw Through Cement Block and Drywall For Recessed Lighting

  • 152mm 6" CARBIDE GRIT HOLE SAW For Drilling Holes In Tough To Drill Materials, Regular Toothed Hole Drill Bit Would Go Dull If Used As A Drywall Hole Saw But With Carbide Tipped Tool Bits They Are Tougher And No Teeth To Snag And Go Dull..
  • TUNGSTEN CARBIDE GRIT Hole Saws Are Professional Tools Construction Tools Electrician Tools And Plumbing Tools Whether It Be For Diy Home Improvement Or Remodelling. Drill Holes Through Brick Walls To Run Conduit For Electric Cables And Pvc Water Pipes And Waste Pipes..
  • TILE HOLE SAW Drill Ceramic Wall Tiles And Low Density Subway Tile Without Hammer Drill Setting, When Used As Concrete Tools Hammer Drill Is A Must So The Tct Hole Saws Are Best Used With Our Hole Saw Abors That Already Come With Tct Masonry Drill Bits For Pilot Bit No Point Having A Hole Saw That Can Cut Holes In Brick If The Pilot Drill Set Will Not..
  • MANY SIZE GRIT HOLESAW BITS Available Either As Carbide Hole Saw Kit Or Individually From 5/8 16mm To 7" 178mm, These Tungsten Holesaw Bits Are Also Available Including Hex Hole Saw Arbor Or Including Sds Plus Hole Saw Arbor Mandrel inc TCT Pilot.
  • WHO USES OUR CARBIDE HOLE SAWS Plumbers Electricians Contractors for Masonry Tools Home Builders Boat Builders Aviation FiberGlass Car Body Installers Fib....
Check Stock

4 Inch Carbide Hole Saw Bit Concrete Hole Saw for Dryer Vent and Drywall for Recessed Lighting 102mm Carbide Hole Cutter for Stucco Brick Fiberglass Reinforced Plaster Ceramic Tile and Cement blocks

  • 102mm 4" CARBIDE GRIT HOLE SAW For Drilling Holes In Tough To Drill Materials, Regular Toothed Hole Drill Bit Would Go Dull If Used As A Drywall Hole Saw But With Carbide Tipped Tool Bits They Are Tougher And No Teeth To Snag And Go Dull..
  • TUNGSTEN CARBIDE GRIT Hole Saws Are Professional Tools Construction Tools Electrician Tools And Plumbing Tools Whether It Be For Diy Home Improvement Or Remodelling. Drill Holes Through Brick Walls To Run Conduit For Electric Cables And Pvc Water Pipes And Waste Pipes..
  • TILE HOLE SAW Drill Ceramic Wall Tiles And Low Density Subway Tile Without Hammer Drill Setting, When Used As Concrete Tools Hammer Drill Is A Must So The Tct Hole Saws Are Best Used With Our Hole Saw Abors That Already Come With Tct Masonry Drill Bits For Pilot Bit No Point Having A Hole Saw That Can Cut Holes In Brick If The Pilot Drill Set Will Not..
  • MANY SIZE GRIT HOLESAW BITS Available Either As Carbide Hole Saw Kit Or Individually From 5/8 16mm To 7" 178mm, These Tungsten Holesaw Bits Are Also Available Including Hex Hole Saw Arbor Or Including Sds Plus Hole Saw Arbor Mandrel inc TCT Pilot.
  • WHO USES OUR CARBIDE HOLE SAWS Plumbers Electricians Contractors for Masonry Tools Home Builders Boat Builders Aviation FiberGlass Car Body Installers Fib....
Check Stock

Koopi 2 Inch BI-Metal Hole Saw with Arbor and Replacement Pilot Drill Bit, 51mm Dia Hole Cutter for Easily Drilling Wood, Plastic, Thin Metal

  • This 2" Hole Saw Drill Bit is designed for wood / plastic cutting..
  • Arbor shank diamater- 3/8 in (fit for all 1/2"&3/8" drill).
  • Non-binding clean edge design make the hole saw blade cuts smooth and fast.More than that,the spring on the drill bit is nice because it automatically pushes the disc out of the saw immediately after completing the hole..
  • It is made of M42 BI-Metal and High Speed steel, Durable and cuts clear.
Check Stock

Kyoffiie Diamond Drill Bits, 16Pcs Diamond Hole Saw Set with 10Pcs Tile Hole Saw Set & Adjustable Hole Saw Guide Jig Fixture 6mm-50mm for Glass, Porcelain, Ceramic, Marble, Tile, Granite

  • 【Premium Material】- These hollow drill hole saw set are made of high speed steel and have a nickel-plated coating to resist corrosion. The thickened diamond coating on the top provides excellent cutting strength for high-precision, smooth cuts without hemming for maximum drilling results..
  • 【Multiple Sizes】- 10 Sizes tile drill bits to meet various needs. Including 6mm, 8mm, 10mm, 12mm, 20mm, 25mm, 30mm, 35mm, 40mm, 50mm, diameter of triangle bit: 6mm, 8mm, 10mm, 12mm. Set include 10 holes saw drill bits+1 hole saw guide clamp+1 screwdriver driver + 4 triangle bit..
  • 【Ergonomic Design】- The large clearance holes along the drill bit help the entry of cooling water and the escape of chips and other particles from the borehole, ensuring smooth punching and making the drilling process easier. When debris gets stuck in the small hole saw. We can use our screwdriver to pull it out. Ceramic drill bit to provide you with the perfect experience..
  • 【Adjustable Fixture】- Adjustable hole saw drilling guide fixture with suction cup-the maximum opening length of the board is 3-1 / 4.
Check Stock

VIKITON 6 Inch Hole Saw with Arbor for Metal Wood and Plastic Cutting, 152mm Bi-Metal Hole Cutter for Different Project with Smooth and Flat Drilling Edge, Fast Chip Removal, Handy Hole Saw Kit Set

  • 【Long Service Life】Bi-Metal construction , special flexible steel saw body and high speed steel cutting teeth , makes longer service life , rust proof , great corrosion and heat resistance..
  • 【Superior Versatile Performance】High speed steel sharp cutting teeth effectively drills through metal , wood , corn hole boards, PVC board , plastic and drywall , clean and smooth , high precision..
  • 【Easy to Use】Rotate the arbor and hole saw until it's very close (don't need tight), then line up the locking pins with the hole at the hole saw and screw them tightly..
  • 【High Efficiency】The deep gullets on the sides of hole saw provides fast chip removal, and the geometry funtional slot on the bottom of hole saw provides easy plug removal..
  • 【Package Include】1 pc 6'' hole saw, 1 pc arbor(with 1 drill bit), 1 pc drill bit for replacement, 1 pc hex key..
Check Stock

VEVOR Concrete Hole Saw Kit, 1-2/11', 1-3/5', 2-9/16', 3-5/32', 3-15/16' Drill Bit Set SDS Plus & SDS MAX Shank Wall Hole Cutter w/a 4-1/3' Connecting Rod for Concrete, Cement, Stone Wall, Masonry

  • Hole Saw Tools in One Kit: Our concrete hole saw kit provides 10PCS, including 1-2/11" to 3-15/16"(30-100 mm) of hole saws, SDS PLUS and SDS MAX shanks, 2 pcs 4-1/3"(110mm) pilot drill bits. Easily store and carry our hole saw tool kit in our zip-up storage case made of aluminum..
  • 135° Sharp Pilot Drill Bit: The 135-degree pilot drill bit ensures you open the wall hole in precisely the right place every time. And the multi-edged blades of the hole saw are designed to make your drilling cleaner, faster, and more efficient. The chip removal hole can quickly remove dust, thus preventing clogging..
  • Premium Material: Hole saw for masonry is made of high-quality carbon steel. It is sturdy and durable. They are sharp enough to open the wall and wear-resisted. And the connecting rods with 40CR steel are rigid and not easy to break..
  • For most Hammer Drills: The shank of the connecting rod adopts SDS PLUS and SDS MAX design, which is compatible with four-hole and five-hole electric rotary hammer drills. They are compatible with hammer drills of Bosch, DeWalt, Hiltex, Makita, Goplus, etc..
  • Wide Application: This masonry hole saw can drill through common walls and floors made of brick, concrete, cement, and stone. It makes installing air conditioners, water pipes, ....
Check Stock

1 1/4 Inch Diamond Hole Saw Drill Bit Ceramic Porcelain Tiles Quartz Granite Countertop Glass Bottle 1.25 inch Tile Drill Bit 1-1/4 inch Hole Cutter

  • 1-1/4 inch Premium Quality Diamond Hole Saw Solid Steel Body: Spins True, Cools Better, Lasts Longer.
  • Standard 3/8" Shank for Standard Drills - No Special Tools Needed.
  • Drills Through Quartz, Granite, Porcelain, Ceramics, Tiles, Glass High quality, diamond drill bits, glass drill bit, hole saw drill bit diamond - DRILL THROUGH TILES and Backer Cement Board.
  • Increased Body Height for Deeper Cuts Clean, Precise, Fast, and Dustless Cuts Every Time.
  • Diamond Drill Bit Tile Hole Saw Ceramic Porcelain Quartz Granite Glass Fish Tank Kitchen Bathroom Shower Faucet Installation.
Check Stock

VIKITON 1 inch Hole Saw with Arbor for Cutting Metal Wood and Plastic, 25mm Bi-Metal Hole Cutter for Different Project with Smooth and Flat Drilling Edge, Fast Chip Removal, Handy Hole Saw Kit Set

  • Longer Service Life: Bi-Metal construction , special flexible steel saw body and high speed steel cutting teeth , makes longer service life , rust proof , great corrosion and heat resistance.
  • Superior Versatile Performance: High speed steel sharp cutting tooth can effectively drills through metal , wood , PVC board , plastic and drywall , flat and smooth , high precision.
  • Easy to Use: Pass the pilot drill bit on the connecting arbor through the center circular hole on the back of the hole saw, and rotate the connecting arbor until it is tightened..
  • High Work Efficiency : The deep gullets on the sides of hole saw provides fast chip removal.
  • Tool Kit Includes: 1" hole saw, 1 pilot drill bit for replacement, 1 arbor(contain 1 drill bit), 1 hex key.
Check Stock

4-1/4 Inch 108mm HSS Bi Metal Hole Saw Cutter with Arbor for Wood , MDF,Metal

  • This hole saw kit includes 1 of 4-1/4” (108mm) hole saw, 1 of 0.43”(11 mm) hex shank large mandrel , 1 of Ø 1/4” (6.35mm) x 3.5" (89mm) Sliver HSS pilot drill bit for wood and soft metal, 1 of Ø 1/4” (6.35mm) x 3.5" (89mm)Black HSS pilot drill bit for hard metal. Max cutting depth: 1-1/2”(38mm).
  • 二，The set includes the most popular hole saw sizes on the market to meet your different demands. Ideal for Wood, Plasterboard, PVC, Drywall, Aluminum, Sheet Metal. Special kit for DIY projects and household maintenance and repair， utilizes alignment window and taller bushings to deliver accurate height placement and straight drilling with the hole saw set...
  • Bi-metal strip is made by laser welding machine and vacuum heat treatment, providing better hardness, strength, and longer life..
  • 100% Satisfaction Guarantee: If you are not satisfied, Free return..
Check Stock

Rokrou Diamond Drill Bits Diamond Brazed Hole Saw Kit 10PCS Tile Drill Bit with Hole Saw Guide from 6 -50mm /1/4\-2\ for Tile, Drill, Glass, Marble, Granite …

  • 【10 ᴛɪᴍᴇs ʟᴏɴɢᴇʀ ʟɪғᴇ ᴛɪᴍᴇ】Processed with brazing technology, premium level super fine diamond sand is attached to the coated steel body. Our Brazed Hole Saw can last 10 times longer than an ordinary hole saw..
  • 【ᴍᴜʟᴛɪᴘʟᴇ sɪᴢᴇs】The diamond hole saw contains ten different sizes, including 6mm/0.24" 8mm/0.31" 10mm/0.39" 14mm/0.55" 18mm/0.71" 22mm/0.87" 25mm/1" 32mm/1.26" 40mm/1.57" 50mm/1.97"..
  • 【ғᴀsᴛᴇʀ ᴅʀɪʟʟɪɴɢ ᴡɪᴛʜ ʙᴇᴛᴛᴇʀ ᴅʀɪʟʟ】Compared to the ordinary material hole saw, our drill with fine diamond sand can drill holes on hard materials such as tile, drill, glass, marble, granite, much faster..
  • 【ᴅʀɪʟʟ ɢᴜɪᴅᴇ】No need to worry about scratching your tile when drilling the hole. Our Adjustable hole saw drilling guide with a suction cup and 4 bearings will hold the diamond hole saw still during the process. From 6mm to 50mm all the hole saws can fit in this guide..
  • 【ᴛɪᴘs】When the diamond drill bit is working, continuous cooling with water is key to reduce the chance of burning your bit, extending the life of the drill..
Check Stock