ReviewsHole Saw For Concrete

4-1/2 inch Concrete Hole Saw SDS Plus Shank for Cinder Block Stucco Cement Brick Poured Concrete Basement Wall Floor Foundation Pavement Blocks Hole Cutter for Pipes Outlets

  • 4-1/2 inch Concrete Hole Saw with SDS Plus Connection.
  • Drills Through Concrete, Brick, Stucco, Pawer Stones, Walls, Floors, Cinder Blocks.
  • 4.5 inch Concrete Hole Saw, SDS Plus Connector, and Pilot Drill Bit Included.
Check Stock

8Pcs Concrete Hole Saw Kits, 40mm 65mm 80mm 100mm 125mm 5pcs SDS Plus Shank Masonry Hole Saw Cutters, 110mm Connecting Rod, 2 Center Drill Bits for Cement Brick Wall

  • This Concrete Hole Saw Kit has 8 pieces included. 5 pieces hole saw cutters: 40mm, 65mm, 80mm, 100mm, 125mm. One piece connecting rod 110mm, and 2 pieces drill bits..
  • The wall hole saw cutter kit are made of high quality alloy metal for long time use..
  • This Cement Hole Saw Drill Bit is Very easy to use with fast speed..
  • These Hole Saw Cutters are Mainly used in drilling walls, stones, bricks or installing air conditioners, range hoods, pipeline opening, etc..
Check Stock

Aracombie 4PCS 1-1/4 Inch to 2-1/8 Inch Hole Saw Kit for Wood, 1.2 Inch Cutting Depth Hole Cutter Drill Bit with Mandrel, Round Hole Saw Set for Cornhole Boards Plastic Drywall Soft Metal (Black)

  • ...held or vertical drill, Colour: Black..
  • Wide Range of Application: Plastic hole saw has sharp teeth, which can quickly drill a smooth edge hole in wood, plastic, PVC, cornhole boards, drywall, fiberglass, thin metal and other materials. Round hole saw cannot be used to cut concrete..
  • Cost-Effective: The fiberglass hole saw cut to a depth of approximately 1 inch / 25.4mm. A set contains 4 pack circle hole saw cutter, which is very suitable for woodworking, decorators, DIY enthusiasts, and craftsmen to buy and use..
  • Material: Drywall hole saw kit is made of high quality carbon steel, which is wear-resistant and durable. This fiberboard hole saw surface is painted and the side chip hole is designed to further extend the service life..
  • After-Sales Guarantee: Aracombie has a 24-hour human customer service. If you have any questions before purchasing or are not 100% satisfied with the product, please feel free to contact us, and we will provide you with solutions as soon as possible..
Check Stock

Acrux7 Concrete Hole Saw Kits Set for SDS Plus Shanks, Wall Hole Saw 30mm 50mm 65mm, Hole Saw Drill Bit Set for Brick Concrete Cement Stone Wall Drilling Hole Saw Cutter for Cement Masonry Tile Brick

  • ⭐High quality---The concrete hole saw kit made of tungsten steel and alloy, high-frequency welding technology, welding openings is very strong, smooth inside and outside welding mouth. Ultra-sturdiness and durable, easy to operation, and long service life..
  • ⭐3 Different Size---The wall hole saws(65mm, 50mm, 30mm ) are prepared for different cutting diameters, an all-in-one choice for daily use..
  • ⭐Long SDS Plus Shank---Package come with a SDS plus shank for this cement drill bits, male thread adapter design, match your drill chuck fastening and much more improve speedier drilling..
  • ⭐Widely Used---The concrete hole saw Mainly work on the Opening Hole Operation of Wall and Brick structure, such as Red brick and Cement,lathe and plaster, brick, and cinder block..
  • ⭐Simple Operation---This Hole Saw Drill Bit Set easy to use, and fast perforated, stable and reliable performance. Great for installing the Air Conditioner, Oil Fume exhauster and Sewer Pipeline Hole Open etc..
Check Stock

Angle Grinder Attachment M14 Adapter 5/8 inch 11 Female to M14 Male 12,000 RPM Rated Wire Wheel Drill Adaptor Compatible with Dewalt, Makita, Milwaukee, Hitachi, Ryobi Tools

  • Heavy-duty, solid steel, commercial grade adapter for using a European attachment (Metric 14) on North American 5/8"-11 angle grinder, grinder saw, concrete angle grinder. 12,000 RPM rated. Female side is 5/8"-11 and male side is M14 threaded. Mortar rake adapter.
  • M14 side is 0.75 inch long. You can use M14 Threaded Mortar Rake, Diamond Tools, masonry hole saw, drill grinder attachment, polishing rake, polisher attachment, diamond wire saw, hole saw drill attachment with your standard American 5/8" 11 threaded power tools..
  • This wheeler angle grinder drill chuck adapter has a water hole in the center for cooling diamond tools, diamond hole saw, diamond core drill bits..
  • If you have a 5/8"-11 standard North American power tool, this american to european adapter will help you use M14 (metric 14) a female threaded wheel polisher drill attachment, diamond core drill bit, hole drill attachment, angle grinding wheel, angle grinder polisher..
  • Standard small hand polisher can utilize this angle grinder arbor adapter or M14 drill adapter for a polishing spindle, metric hole saw, mortar rake..
Check Stock

RVIQI 9PCS Concrete Hole Saw Set,Tungsten Steel SDS Plus Shank Masonry Wall Hole Opening Drill Bits for Brick, Concrete, Cement Stone

  • PACKAGE INCLUDED- 5 PCS Hole Opener：1-2/11”(30mm), 1-3/5”(40mm), 2-9/16 “(65mm), 3-5/32”(80mm), 3-15/16”(100mm).
  • 2PCS SDS connecting rod: SDS 11-13/16”(300mm), SDS max 11-13/16”(300mm).
  • HIGH MATERIAL- Our concrete hole saw set is made of tungsten steel and carbide, durable and works under rough conditions,but also super safe to use and simple..
  • UNIQUE BLADE DESIGN- The concrete hole saw’s blade is made of raw materials, thicker and sharper than other ordinary blade. Can easily penetrate steel bar up to 6mm..
  • WIDE APPLICATION- The masonry wall cutter bit kit fits SDS plus hammer drills. Perfect used for Brick, concrete, cement, stone, mixed brick wall, foam wall and installation of air-conditioner..
  • LIFETIME GUARANTEE- We focus on the quality of products and care about your satisfaction. If you have any question, please contact us by email or Q&A, the reply will be provided within 24 hours..
Check Stock

Mollom Heavy Duty Carbide Hole Saw, Hole Cutter cuts Stainless Steel, mild Steel, Iron, Copper, Brass, Plastic ( 3'' 76mm )

  • ✔️┋【More Teeth】Includes 15 teeth for faster cutting and more teeth than other brands..
  • ✔️┋【Dimension】Cutting Dia: 3'' | 76mm.
  • ✔️┋【Extremely Long Life】Carbide hole saw last 10X Long Life over standard bi-metal hole saw, and even can bore up to 0.1 inch thick stainless steel..
  • ✔️┋【High Quality Material】Made from high quality TCT Carbide( Tungsten Carbide Tipped Cutters), High-grade Titanium-plated cemented carbide Tooth, ensuring its high hardness, rust proof, sturdy and durable..
  • ✔️┋【Multipurpose Tools】This Carbide Hole saw set apply to Bench drill, magnetic drill, gun drill, drill percussion and so on. Perfect for hard metal, stainless steel plate, square tube, iron, cast iron, wood, F.R.P and other general sheet metal；Note: Cannot be used for concrete, tiles and stone..
  • ✔️️┋【Perfect Cutting】The spring loaded pilot bit ejects the cut slug, saving time. The cutter body then cuts a clean, burr-free hole faster than conventional twist drills or hole saws..
Check Stock

HLOFIZI 4 Inch Carbide Grit Hole Saw for Recessed Lights and Dryer Vent, Cuts Through Stucco, Ceiling Old Plaster, Drywall, Cement Board, Hard Wood with 1-1/2\ Depth, Up to 6X Faster

  • 4 inch hole saw ideal for installing recessed lighting, dryer vent hole, and other roof vent.
  • Drilling holes through lots of abrasive materials, ceiling stucco, old plaster, drywall, hard wood, plywood, sheetrock, cement board, plastic, PVC. Not recommended for cutting metal sheet, brick, concrete block, cement tile.
  • Constructed with long-lasting tungsten carbide grit edge, 4 in. hole saw easy and fast cuts thick wood, plaster stucco ceiling & wall. Cutting depth 1-1/2 inch.
  • Clean and smooth cutting, slot for easy plug removal. Comes with arbor and carbide-tipped pilot drills. Hole saw arbor: fit 3/8" chuck.
  • 100% SATISFACTION GURANTEED: If you are dissatisfied with our 4" carbide hole saw for any reason, return your order within 90-Days for full refund, we will always go above and beyond to ensure you are happy with your customer experience. We appreciate all your remarks and comments. They are the key tools to develop and improve our hole saw.
Check Stock

Mollom Heavy Duty Carbide Hole Saw, Hole Cutter cuts Stainless Steel, mild Steel, Iron, Copper, Brass, Plastic ( 1-3/4'' 45mm )

  • ✔️┋【More Teeth】Includes 10 teeth for faster cutting and more teeth than other brands..
  • ✔️┋【Dimension】Cutting Dia: 1-3/4'' | 45mm.
  • ✔️┋【Extremely Long Life】Carbide hole saw last 10X Long Life over standard bi-metal hole saw, and even can bore up to 0.1 inch thick stainless steel..
  • ✔️┋【High Quality Material】Made from high quality TCT Carbide( Tungsten Carbide Tipped Cutters), High-grade Titanium-plated cemented carbide Tooth, ensuring its high hardness, rust proof, sturdy and durable；.
  • ✔️┋【Multipurpose Tools】This Carbide Hole saw set apply to Bench drill, magnetic drill, gun drill, drill percussion and so on. Perfect for hard metal, stainless steel plate, square tube, iron, cast iron, wood, F.R.P and other general sheet metal；Note: Cannot be used for concrete, tiles and stone..
  • ✔️️┋【Perfect Cutting】The spring loaded pilot bit ejects the cut slug, saving time. The cutter body then cuts a clean, burr-free hole faster than conventional twist drills or hole saws..
Check Stock

tonchean 6PCS Drill Bits Hole Saw Set Carbide Hole Cutter Set 5/8-2inch(16-51mm) Heavy Duty Hole Saw Kit for Plastic, Stainless Steel, Metal, Iron, Aluminum, Alloy, Wood, with Aluminum Case

  • ...it to use. At tonchean, we provide a high-quality hard and tough aluminum case for each hole saw kit for easy storage and convenience..
  • 【Wide Application】Widely used in stainless steel plate, hard metal, iron, mild steel, alloy steel, aluminum, FRP, and plastic to drilling holes. Not recommended for tile, glass, concrete, stone..
Check Stock

1 3/8 Diamond Hole Saw Core Heavy Duty Diamond Drill Bit Concrete Granite Quartz Porcelain Slab Countertops Ceramic Tile Brick Brazed with 5/8″-11 Thread 1-3/8 in

  • Heavy duty. pro grade, vacuum brazed diamond hole saw for quartz, granite, concrete, cinder block, brick drilling..
  • Diameter is 1-3/8 inch with 5/8 inch – 11 threaded connection, maximum depth of cut is 1-3/8 inches..
  • Diamond vacuum brazed commercial grade, long life diamond core drill bit hole saw. For heavy duty professional applications..
  • Tile core bits used with core hole drill tools with 5/8 inch -11 threaded angle grinder or other tools..
  • Commercial grade, professional quality heavy duty diamond bits for drilling stone, diamond hole saw bits, diamond drill bit for granite bits for drill.
Check Stock