ReviewsHole Saw For Stainless Steel

Rocaris 10 Pcs Hole Saw Kit for Hard Metal 16-53mm, Tungsten Carbide Tipped Carbide Hole Saw Set with Titanium-Plated Pilot Drills for Stainless Steel, Metal, Iron, Wood, Plastic

【Top Quality】 Made of high quality Tungsten Carbide Tipped Carbide, High-grade Titanium-plated cemented carbide Tooth are sharp, anti-rust and sturdy..
【Innovative Three-blade Design】 Designed as Three-blade, The Carbide Hole Saw Kit‘s teeth is sharper and more efficient, ideal for cutting hard metals..
【Chip Hole design】 Design chip hole to Prevent clogging, the Hole Saw Kit for Metal improve hole-opening efficiency without blocking..
【Multipurpose Tools】The Metal Hole Saw Kit can be applied to electric drills, bench drills and hand drills.Widely used in stainless steel plate, hard metal, iron, mild steel, alloy steel, aluminum, FRP, and plastic to drilling holes. Not recommended for tile, glass, concrete, stone..
【Great variety】Include 10Pcs Tungsten Carbide Tipped Hole Saw Set with 1Pcs hex wrenches(Size:16, 18, 20, 22, 25, 30, 35, 45, 50, 53mm). To prevent rust, each drill bit must be oiled. All drills are packed in an exquisite aluminum box, which would be a excellent present for you, your family and friernd..
【Tips】For your safty, please make sure you wear SAFETY equipment such as a face shield (or Full Coverage Goggles) and gloves..

Check Stock

HSS Hole Saw Kits, High Speed Steel Drill Bits Hole Saw Opener Cutting Tool for Metal, Copper, Stainless Steel, Iron Plate (thick less than 1/9\(3mm)) Big Size 9/15”(15mm) ~ 2-4/25”(55mm) Set of 8

Material: These metal hole saw arbors made of high speed steel, and carbide steel saw teeth, highly hardness, strong toughness, low abrasion, wear resistance, long using life.
Available application: These hole saw kits can be used for stainless steel sheet, iron plate, thin aluminum, copper, pipes, wood, plastic etc(less than 3mm). And it can compatible with pistol drill, bench drill, vertical electric drilling machine etc.
Set of 8 different size: 9/15”(15mm), 25/32”(20mm), 1-1/10”(28mm), 1-8/45”(30mm), 1-11/30”(35mm), 1-13/20”(42mm), 1-22/25”(48mm), 2-4/25”(55mm). Multi different size HSS hole saw set for your choose, it will meet most of your needs..
Attention: When you use the hole saw drill bit, you should fixed the plate first, and make the angle of drill and plate at 90 degree. Also, the rotating speed should be increased slowly, the bigger of saw, the slower of the speed, and add the fresh water to cool the saw when it working..
Warranty: We promise to provide satisfied service for all of client, if there is any quality issue, we can give you a new replacement or full refund..

Check Stock

Rannb 38mm/1.5 Inch Hole Saw Carbide Tipped Hole Saw for Cutting Stainless Steel Plate, Iron, Steel

⭐【Material】Our hole saw adopts premium Tungsten Carbide Tipped(TCT) with high hardness and good wear resistance..
⭐【Dimension】Cutting Dia: 38mm/ 1.5".
⭐【Ideal Design】Split tip pilot drill prevents damage by gradually guiding cutter to material..
⭐【Package Content】1 x Hole Saw + 1 x L Wrench + 2 x Pilot Drill Bit.
⭐【Applicable Material】You can easily to drill on the stainless steel plate, iron, steel, castings, aluminum alloy and other metal plate drilling..

Check Stock

LIUDAINC Diamond Drill Bit Set Hole 5PCS Steel Hole Saw Cutter Tool Saw Tooth HSS Drill Bit Hole Saw Set Stainless Steel Metal Alloy Kit 16Mm 18.5Mm 20Mm 25Mm 30Mm

➤ Widely Used: The hss hole saw kit is able to cut round holes in stainless steel, mild steel, iron, aluminum plate, alloy plate, plastic sheet,....
➤ HSS Hole Saw Kits: Package Included 5 pcs hole saw: 16/18.5/20/25/30mm.
➤ Wide application: Our Hole saw set is suitable for hand-held electric drill, vertical electric drill and mobile belt magnetic drilling machine..
➤ Special Design: This hole cutter set applies central spring design. It can control the amount of feed and helps chip removal, avoiding damage to....
I wish you a good day, a good life and a safe life, cordial greetings, sincere blessings, my best regards！.

Check Stock

uyoyous TCT Hole Saw Set 23 PCS Carbide Hole Cutter Set 16-100mm Drill Tips TCT Bit Metal Alloy Hole Saw Kits for Wood Stainless Steel Copper Iron with Separate Small Box

1.【CUTTING DIAMETER】:16-100mm，16mm/0.63'', 18mm/0.71'', 20mm/0.79'', 22mm/0.87'', 25mm/0.98'', 26mm/1.02'', 28mm/1.1'', 30mm/1.18'', 32mm/1.26'', 35mm/1.38'', 38mm/1.5'', 40mm/1.57'', 45mm/1.77'', 48mm/1.89'', 50mm/1.97'', 53mm/2.09'', 55mm/2.17'', 60mm/2.36'', 65mm/2.56'', 70mm/2.76'', 75mm/2.95'', 80mm/3.15'', 100mm/3.94''..
2.【MATERIAL】:The gears is made from carbide steel and the rigidity varies from the hole saw has a twist drill bit inside, which is undetachable..
3.【FEATURES】:TCT Drill Bit sets cut quick, precise holes in stainless steel plate, mild steel, alloy steel,iron,copper,aluminum,castings,plastic and brass. And the hole saw cutting kits are available for lots of different sizes to meet most of your needs..
4.【TIPS】When processing stainless steel, please keep the drilling rig running evenly at a low speed, or punch the center hole in advance, which can better extend the service life of the product. for PVC and wood materials, the maximum cutting depth is 0.98 inches, and the cutting depth for thin steel plates is 0.04 inches..
5.【APPLICATION】: The hole saw kit is suitable for hand held electric drill, stand motor-driven drilling machine and mobile ribbon type magnetism drilling machine..

Check Stock

ArtisanShow 6PCS Diameter 22-65mm Tip Hole Saw Drill Bits Kit Carbide Alloy Hole Saw Set for Cutting Thick Stainless Steel, Sheet Metal, Cast Iron, Copper, Brass, Steel Plate, Fiberglass and FRP.

✅[Specifications] Equipped with 6 different sizes of hole saws. Able to meet your various demands. High hardness stainless steel ensures durable use. The hole saw has a twist drill bit inside, which is undetachable..
✅[Parameters] Drill Bit Size Details: Diameter: 22 - 65mm( 22mm 30mm 35mm 45mm 50mm 65mm), total Length: about 68mm, shank diameter: about 9mm..
✅[Wide application] These Circle hole saw drill bit can be clamped on hand drill and bench drill, can be used for thick steel plates, cast iron, stainless steel, non-standard angle iron and other metal open hole..
✅[Material] Made of high-quality stainless steel. the blade is extremely sharped and resistance to cutting..
✅[Quality] High quality. All our products are extensively tested to comply with rigorous and strict QC standards. We offer a 60-day refund guarantee..

Check Stock

Lenox Tools - T29964-64CG LENOX Tools Hole Saw, Carbide Grit, 4-Inch or 102mm (2996464CG)

Carbide grit hole saw cuts through a wide range of abrasive materials.
Hole saw has a clean-cutting carbide grit edge that won't snag or chip when cutting thin materials.
Use the hole saw with a 2L or 7L standard arbor or a 2L SNAP-BACK arbor.
Heat resistant carbide teeth for long life in tile and stainless steel..

Check Stock

TCT Hole Saw Set, 16-53mm Tungsten Carbide Tipped Hole, 13 Pcs Carbide Hole Saw Kit with Titanium Plated Pilot Drill Bit for Stainless Steel, Metal, Iron, Wood and Aluminum

Safe & Durable: This carbide hole saw set uses variable teeth technology with 3 distinct cutting edge to balance the cutting and make the blades more durable, sharp and more efficient for cutting hard metal..
Fasting Cutting: Carbide technology and optimized tooth geometry make hole cutter cut fast in most applications. This carbide hole cutter can precisely cut very smooth holes due to the concentricity rate..
Wide Application: 1/2 inch cutting depth makes this stainless steel hole cutter easy to pass through thick material such as: thick metal, stainless steel, iron pipes, aluminum, brass and sheet metal plate..
QUALITY MATERIAL: Our hole saw set are Made from high quality TCT Carbide( Tungsten Carbide Tipped Cutters), Top-grade Titanium-plated cemented carbide Teeth ensures its high hardness, rust proof, sturdy and durable..
PACKAGE INCLUDES: The package includes 13 Pcs carbide hole saw: 16mm(5/8”), 18mm(45/64”), 20mm(25/32”), 22mm(55/64”), 25mm(63/64”), 26mm(1-1/32”) 28mm(1-7/64”), 30mm(1-3/16”), 35mm(1-3/8”), 40mm(1-37/64”), 45mm(1-49/64”), 50mm(1-31/32”), 53mm(2-3/32”). A variety of sizes to meet your different needs..

Check Stock

EZARC Carbide Hole Cutter Set 9 Piece for Stainless Steel Long Life Hole Saw Kit for Hard Metal

Industrial grade metal drilling hole cutter, more than 10 times longer life than Bi-Metal hole saw on hardened metal drilling..
Extremely long lifetime and no teeth breakage for any tough job with high-end tungsten carbide technology..
Provide fast and precise cuts into stainless steel, sheet metal, cast iron, mild steel, aluminum and FRP smaller than 5mm..
Smooth cut with perfect cutting quality for every hole..
This hole saw set includes : 5 pcs hole cutters with dimensions 7/8 inch, 1-1/8 inch, 1-3/8 inch，1-3/4 inch, 2 inch, 3 pcs pilot drill bits and 1 pc....

Check Stock

6-3/8 Inch Hole Saw with Heavy Duty Arbor, 6 3/8”Recessed Lighting Hole Saw with 1-1/2 Inch Cutting Depth, Bi-Metal Hole Cutter for Smoothly Cutting Ceiling Tile Drywall Plywood Plaster Metal Plastic

【Bi-Metal 6-3/8-Inch Hole Saw】The 6 3/8in hole saw made of HSS carbon steel & Bi-metal steel, heavy-duty steel construction and carbide grit edge, ensuring perfect drilling performance and providing the fastest, most consistent and longest lasting cutting.
【Recessed Lighting Hole Saw】The 6 3/8inch recessed lighting hole saw can drill precise holes fast in varied ceiling materials like drywall, plywood, ceiling tile, fiberglass, cement board, plaster and MDF.
6Inch recessed light fixtures requiring the 6-3/8" hole saw that suitable for most major brands of 6-Inch (162 mm) recessed lighting fixtures.
【Wide Applications 162MM Hole Drilling Cutter】Made with a continual rim, Bi-Metal hole saw cut metal and wood quickly and cleanly without tearing the material, widely used for cutting 6inch holes in metal, plaster, wood, plastic, acrylic-board, steel and aluminum.
Essential home hole cutter for ceiling lights, recessed light, cornhole board, air ducts, speakers, range hood.
【Smooth and Fast Cutting】Designed with the non-binding clean edge and sharp carbide teeth, the heavy duty 6-3/8” hole saw can cutting faster, smoother, and more precise holes than most hole saw on the market.
Widely used in plate holes, household wood, galvanized pipe, gy....

Check Stock

HSS Hole Saw Kits for Metal, Rocaris 23 pcs High-Speed Steel Hole Saw Cutting Kit Drill Bits Opener Cutter Tool for Stainless Steel,Copper, Iron 16~100mm

【Innovative three-blade design】Designed as Three-blade for layered cutting, the Hole Saw Kit for Metal can make the cutting resistance smaller and chip evacuation smoother.It can extend the service life..
【Top Quality】Made of High Speed Steel, the Titanium-plated cemented carbide Tooth are sharp, anti-rust and durable.Ideal for hand held electric drill, stand motor-driven drilling machine and mobile ribbon type magnetism drilling machine..
【Fast Cutting】The teeth of metal hole saw kit are designed as front and rear low top tooth profile and Three-blade, which make it more efficient than flat tooth drilling..
【Multipurpose Tools】The carbide hole saw set are widely used in stainless steel plate, hard metal, iron, mild steel, alloy steel, aluminum, FRP, and plastic to drilling holes. Not recommended for tile, glass, concrete, stone..

Check Stock