ReviewsHole Saw For Tile Diamond 78

15 Pcs Diamond Drill Bits for Ceramic, Diamond Hole Saw Drill Bit Set Kit, Premium Glass Drill Bit for Bottles,Pots, Marble, Granite Stone, Tile Cutting 0.23 Inch - 2 Inch（6mm - 50mm）YLYL

  • 【15 Sizes】Diamond drill bits for ceramic, 6mm/0.23“，8mm/0.31“，10mm/0.39“，12mm/0.47”，14mm/0.55“，16mm/0.62”，18mm/0.7“，20mm/0.78” , 22mm/0.86”，25mm/0.98”， 26mm/1.02“，28mm/1.1“， 30mm/1.18“, 40mm/1.57in, 50mm/2“. Glass cutting drill bit to meet various demands!.
  • 【Wide Usage】Diamond hole saw drill bit set kit removes a complete circle from glass, marble, tiles,granite, ceramic or other., Perfect for drilling glass, porcelain tile, granite, bottles, Wood, Blocks Jars, ceramic marble and and other hard surfaces etc..
  • 【Super Material】Glass drill bit for bottles, are made of industrial grade carbon steel, sharp, fine workmanship and super wear-resistant, Extended service life. Glass cutting drill bit are high quality and good performance that excellent for making clean and accurate hole..
  • 【Tip】Diamond drill bits for ceramic, When you using the diamond hole saw, please use lubrication (water), lubrication will extend drill bits life..
  • SATISFACTION GUARANTEE: Our team is committed to providing every customer with good products a....
Check Stock

Drilax 2 3/4 inch Diamond Drill Bit Hole Saw Ceramic Porcelain Tiles Glass Granite Quartz 2.75 2-3/4 Single Pack

  • DIAMOND TIPPED HOLE SAW DRILL BIT 2-3/4 inch for drain holes, quartz, shower, faucet, kitchen and bathroom upgrades..
  • EASY TO USE Diamond Drill Bits. Start at an angle, go vertical, do not apply too much pressure. Keep the tool wet for cooling..
  • WORKS with STANDARD electric, cordless or upright drill presses. Shank size is 3/8 inch..
  • DRILL HOLES in glass, porcelain ceramic tiles, plant pots, fish tanks, granite, marble with diamond coated drill bit hole saw..
  • Tile installation, tiling made easy for Diamond Hole Saw Tools. Shank size is 3/8" - suitable for all standard cordless or drills..
Check Stock

Tile Cutter Hand Tool Cut Floor Tile Glass Tile Cut Tiles Straight or Quarter Curve Manual Tile Cutter Tool for Cutting Wall Tile Porcelain Tile and Glass Tile Faster and Cleaner than a Wet Tile saw

  • For Straight Lines And Up to A Quarter Circle Curve The Tile Cutter Is Great, For Semi Circles Inside Corner Cut Outs Around Outlets Doorways And Toilets You Will Want Kit 1 With Tile Hack Saw Blade For Wall Tile And 4 1/2" Grinder Diamond Tile Blade For Porcelain And Floor Tile, Kit 2 Has Tile Drill Bits For Ceramic And Diamond Drill Bits For Porcelain And Glass To Drill Holes For Grab Bars Shower Doors And Towel Rails, Kit 3 Includes Diamond Tile Hole Saw And Guide For Shower Head Or Faucets..
  • No Wet Saw Rental No Messy Tile Saw, Even Professional Tile Setters Don't Like the Mess a Wet Tile Saw Makes and Even the Best Diamond Blades Can Chip the Edges of The Tiles Forget About Cutting Glass Mosaic Backsplash Tiles on Mesh with Water Saw They Chip Scrunch Up Fly Away and When They Get Wet, They Fall Off Anyway. So, You End Up Pushing Each Tiny Tile Through the Wet Saw with What’s Left of Your Fingers. So, No More Running in And Out the House with Every Tile for Every Single Cut..
  • Not the Old-Fashioned Glass and Tile Cutter It's Not Sharp Its Hard, You Must Apply Pressure to Tile Cutting Wheel to Work Only Work If You Soak Cutter Wheel in Oil and Keep Oiling. Score Tile at Waist Height Not on a Floor. Must Use 2 Hands to Score Hard Tile Never Hold Cu....
Check Stock

Diamond 4 inch Concrete Hole Saw Masonry Core Drill Bit Heavy Duty for Brick, Cinder Block Standard Shank Drilling Holesaw Tool

  • Durable 4 core drill bits for concrete, exactly 4 inches diameter. Tool Life: 7 to 10 holes in concrete. Not for Hammer or Impact drilling..
  • Concrete hole saw 4 inch with 2 inch depth of cut and standard 3/8 inch shank for standard cordless or electric drill. Not for hammer action.
  • 4 in concrete hole saw dry or wet use drilling holes in concrete block, brick, stones, basement walls, foundations, tile, marble, granite countertop, ceramic, porcelain.
  • Sintered diamond 4 in concrete core saw bits for concrete..
  • Diamond is sintered, not visible. Laser welded diamond concrete hammer core bit fits your standard drill. If abused, this hole saw will no last more than a few uses..
Check Stock

Tile Cutters Tile Tools for Cutting Ceramic Tile Glass Tile Cut Straight Lines and Curved Lines Cleanly No Wet Saw No Mess Cut Faster and Cleaner than a Wet Tile saw Replaceable Blade Cuts 1000 Feet

  • For Straight Lines And Up to A Quarter Circle Curve The Tile Cutter Is Great, For Semi Circles Inside Corner Cut Outs Around Outlets Doorways And Toilets You Will Want Kit 1 With Tile Hack Saw Blade For Wall Tile And 4 1/2" Grinder Diamond Tile Blade For Porcelain And Floor Tile, Kit 2 Has Tile Drill Bits For Ceramic And Diamond Drill Bits For Porcelain And Glass To Drill Holes For Grab Bars Shower Doors And Towel Rails, Kit 3 Includes Diamond Tile Hole Saw And Guide For Shower Head Or Faucets..
  • No Wet Saw Rental No Messy Tile Saw, Even Professional Tile Setters Don't Like the Mess a Wet Tile Saw Makes and Even the Best Diamond Blades Can Chip the Edges of The Tiles Forget About Cutting Glass Mosaic Backsplash Tiles on Mesh with Water Saw They Chip Scrunch Up Fly Away and When They Get Wet, They Fall Off Anyway. So, You End Up Pushing Each Tiny Tile Through the Wet Saw with What’s Left of Your Fingers. So, No More Running in And Out the House with Every Tile for Every Single Cut..
  • Not the Old-Fashioned Glass and Tile Cutter It's Not Sharp Its Hard, You Must Apply Pressure to Tile Cutting Wheel to Work Only Work If You Soak Cutter Wheel in Oil and Keep Oiling.....
Check Stock

1 1/4 Inch Diamond Hole Saw Drill Bit Ceramic Porcelain Tiles Quartz Granite Countertop Glass Bottle 1.25 inch Tile Drill Bit 1-1/4 inch Hole Cutter

  • 1-1/4 inch Premium Quality Diamond Hole Saw Solid Steel Body: Spins True, Cools Better, Lasts Longer.
  • Standard 3/8" Shank for Standard Drills - No Special Tools Needed.
  • Drills Through Quartz, Granite, Porcelain, Ceramics, Tiles, Glass High quality, diamond drill bits, glass drill bit, hole saw drill bit diamond - DRILL THROUGH TILES and Backer Cement Board.
  • Increased Body Height for Deeper Cuts Clean, Precise, Fast, and Dustless Cuts Every Time.
  • Diamond Drill Bit Tile Hole Saw Ceramic Porcelain Quartz Granite Glass Fish Tank Kitchen Bathroom Shower Faucet Installation.
Check Stock

Diamond Drill Bit Tile Hole Saw Set, 16 PCS Hole Core Drill Hole Saw Kit with Adjustable Hole Saw Guide Jig Fixture and Ultimate Triangle Drill Bits Set for Tile, Ceramic, Glass, Porcelain, Marble

  • Diamond Drill Bit Set Various Sizes - Set include 10 holes saw drill bits+1 hole saw guide clamp+1 screwdriver driver + 4 triangle bit. 10 Sizes Diamond hole saw : 6mm, 8mm, 10mm, 12mm, 20mm, 25mm, 30mm, 35mm, 40mm, 50mm,made of high-strength carbon steel, the integrated steel structure makes these diamond drill bits more durable. Diameter of triangle bit: 6mm, 8mm, 10mm, 12mm..
  • Rustless & Durable: This diamond drill bits are made of high strength Carbon Steel with smooth nickel plating surface. Each diamond hole saw was coated with high quality Diamond to enhance the drilling speed and creates a sharp, high precision and smooth cut with no broken edges In Seconds. Reduced drill speeds, low drill pressure and increased use of water lubrication will extend drill bit life considerably..
  • Adjustable Fixture - Adjustable hole saw drilling guide fixture with suction cup-the maximum opening length of the board is 3-1 / 4 ", which is large enough to fit in all size hole saws. Movable ball bearings, two modes (fixing 3 or 4 bearings) are your choice, just flip the board..
  • The large clearance holes along the drill bit help the entry of cooling water and the escape of chips and other particles from the borehole, ensuring smooth punching and making the drilling pro....
Check Stock

Diamond Hole Saw 50mm 2 inch with Center Drill Bit for Ceramic,Porcelain,Tile,Glass,Granite Quartz,Marble,Gemstone

  • Diamond drill bit is diameter of 50mm 2 inch.the cutting depth is 1.06 inch..
  • The shank of the diamond hole saw is round of 3/8" can fit for the 3/8" chuck..
  • Good quality of diamond,and with special design,there is a center drill bit for positioning function, which is convenient to guide the hole saw,after form the hole..
  • Beautiful appearance,excellent antirust function by chrome plating treatment..
  • Excellent results in Ceramic,Porcelain,Tile,Glass,Granite Quartz,Marble,Gemstone.
  • We suggest using water to cool the diamond drill bit to prevent overheating..
Check Stock

Delta Diamond Piranha Premium 10 Inch Tile Saw Diamond Blade, 5/8\ Arbor, Continuous Rim, Wet Cutting Porcelain Tile, Ceramic Tile, Stone (10\)

  • PREMIUM TILE SAW BLADE - Made with higher levels of diamond compared to standard blades to provide excellent cutting and performance on a wide range of materials. Use on porcelain tile, ceramic tile, granite, marble, slate, terrazzo, or any similar material..
  • MINIMAL CHIPPING - Thin .090 cutting rim allows for the best combination of cutting speed and blade life while producing a first-class cut!.
  • EXTRA TALL RIM - 11MM tall to maximize blade life and prevent downtime during blade changes..
  • SPECIFICATIONS - 10" diameter X .090 wide X 5/8" arbor. Will fit any tile saw with 5/8" arbor shaft. Max safe rpm is 6,115..
  • LIFETIME WARRANTY & FREE RETURN SHIPPING - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properly, or if the bond between the diamond segment and the steel core becomes separated at any time, the diamond tool will be replaced free of charge..
Check Stock

Diamond Hole Saw 60mm 2-3/8 inch with Center Drill Bit for Ceramic,Porcelain,Tile,Glass,Granite Quartz,Marble,Gemstone

  • Diamond drill bit is diameter of 60mm 2-3/8 inch.the cutting depth is 1.06 inch..
  • The shank of the diamond hole saw is round of 3/8" can fit for the 3/8" chuck..
  • Good quality of diamond,and with special design,there is a center drill bit for positioning function, which is convenient to guide the hole saw,after form the hole..
  • Beautiful appearance,excellent antirust function by chrome plating treatment..
  • Excellent results in Ceramic,Porcelain,Tile,Glass,Granite Quartz,Marble,Gemstone.
  • We suggest using water to cool the diamond drill bit to prevent overheating..
Check Stock

Diamond Hole Saw with Center Drill Bit for Ceramic,Porcelain,Tile,Glass,Granite Quartz,Marble,Gemstone (110mm 4.33inch)

  • Diamond drill bit is diameter of 110mm 4.33inch.the cutting depth is 1.06 inch..
  • The shank of the diamond hole saw is round of 3/8" can fit for the 3/8" chuck..
  • Good quality of diamond,and with special design,there is a center drill bit for positioning function, which is convenient to guide the hole saw,after form the hole..
  • Beautiful appearance,excellent antirust function by chrome plating treatment..
  • Excellent results in Ceramic,Porcelain,Tile,Glass,Granite Quartz,Marble,Gemstone.
  • We suggest using water to cool the diamond drill bit to prevent overheating..
Check Stock