ReviewsHole Saw Mandrel

WORKPRO Hole Saw Kit, 11 Piece, Bi-Metal Hole Drills, 3/4\ to 2-1/2\ High Speed Steel M42 Drill Hole Cutter with Mandrels in Hard Case for Cutting Stainless Steel, Brass, Aluminum, Steel and Wood

  • Fast loading mechanism - The hole saw adapts a new type of quick loading mechanism that allows fast loading without any installation of washers or nuts. The thread design keeps the hole saw more stable when cutting, which makes the cutting hole more standard..
  • Convenience - The saw features a small quick change mandrel, a large quick change mandrel, all wrapped up in a convenient carrying case, which allows you to keep all of your parts organized. Saws are marked with both Imperial and Metric measurements..
  • What you get - The set comes in a strong storage case. It contains many popular hole sizes, including 3/4”, 7/8”, 1-1/8”, 1-3/8”, 1-1/2”, 1-3/4”, 2”, 2-1/4”, 2-1/2”.
  • In addition there are a large pilot drill and a small size pilot drill. The entire set of hole saw can meet your needs, ideal for cutting workpieces like sheet metal, Aluminium, wood, plastic, plasterboard, etc.
Check Stock

Klein Tools 31906 Hole Saw Arbor With Pins, 7/16-Inch

  • For use with Klein hole saws 1-3/8-Inch to 6-3/8-Inch (35 mm to 162 mm).
  • Pins lock the saw to prevent over-tightening.
  • Fast and easy to engage and disengage hole saw.
Check Stock

6 Inch Carbide Hole Saw Bit Concrete Hole Saw 152mm Carbide Hole Cutter Drill Stucco Brick Fiberglass Reinforced Plaster And Ceramic Tile Saw Through Cement Block and Drywall For Recessed Lighting

  • ...o Point Having A Hole Saw That Can Cut Holes In Brick If The Pilot Drill Set Will Not..
  • MANY SIZE GRIT HOLESAW BITS Available Either As Carbide Hole Saw Kit Or Individually From 5/8 16mm To 7" 178mm, These Tungsten Holesaw Bits Are Also Available Including Hex Hole Saw Arbor Or Including Sds Plus Hole Saw Arbor Mandrel inc TCT Pilot.
  • WHO USES OUR CARBIDE HOLE SAWS Plumbers Electricians Contractors for Masonry Tools Home Builders Boat Builders Aviation FiberGlass Car Body Installers Fiberglass Pool and Fiberglass Tub Manufacturers Carbon Fiber Modellers Hobbyists..
Check Stock

4 Inch Carbide Hole Saw Bit Concrete Hole Saw for Dryer Vent and Drywall for Recessed Lighting 102mm Carbide Hole Cutter for Stucco Brick Fiberglass Reinforced Plaster Ceramic Tile and Cement blocks

  • ...o Point Having A Hole Saw That Can Cut Holes In Brick If The Pilot Drill Set Will Not..
  • MANY SIZE GRIT HOLESAW BITS Available Either As Carbide Hole Saw Kit Or Individually From 5/8 16mm To 7" 178mm, These Tungsten Holesaw Bits Are Also Available Including Hex Hole Saw Arbor Or Including Sds Plus Hole Saw Arbor Mandrel inc TCT Pilot.
  • WHO USES OUR CARBIDE HOLE SAWS Plumbers Electricians Contractors for Masonry Tools Home Builders Boat Builders Aviation FiberGlass Car Body Installers Fiberglass Pool and Fiberglass Tub Manufacturers Carbon Fiber Modellers Hobbyists..
Check Stock

Chainsaw Chain Saw Cut Cutting Sawing Wood Tree Forest Horror Halloween Powertools Woodcutter Motor Rev Revving Sound Effects Sound Effect Sounds EFX Sfx FX Tools Power Tools - Chainsaws [Clean]

  • GET THE COMPLETE HOLE SAW KIT: Upgrade your woodwork, craft and power drill equipment with this complete hole saw bundle that includes 8 high carbon steel hole saws, a mandrel, a hex key and case..
  • THE SIZES OF THE HOLE SAW SET: The diameters of the 8 hole saw cutters are 1", 1-1/4", 1-1/2", 1-3/4", 2", 2-1/8", 2-1/4", and 2-1/2", and they have a cutting depth of 1 inch..
  • FLAWLESS PRECISION DRILLING: Thanks to their high speed steel teeth and smooth cutting edges, these hole saws can cut through wood, PCV and plastic with high precision and create super clean cuts..
  • BUILT TO LAST A LIFETIME: Made with premium quality carbon steel and a nickel-plated coating, these drill hole saws are impact and wear resistant, durable and robust..
  • KEEP EVERYTHING ORGANIZED: This 10-piece power drill hole saw set comes in a practical, portable case that allows you to keep the drill hole saws organized and within easy reach when needed..
Check Stock

JIECHENG 6 inch Hole Saw for Cornhole Boards,Metal,Drywall,Plasterboard,Wood and Plywood

  • High grade hole saw 6 inch with 3/8'' Hex shank Mandrel,the cutting depth is about 1.24 inch (32mm),it can make 6 inch diamteter holes..
  • Heavy duty for making Cornhole Boards,air ducts,ceiling light,speakers,duct work,it can drill in drywall,wood ,plastic, gypsum board,aluminium,soft thin metal and rubber. very useful for Interior decoration, DIY tools, downlight installation.
  • Good material:High Speed Steel M42 Bi-metal. with sharp teeth,cut the wood very easy and non binding clean edge..
  • Notice: Please keep safe when operate the drilling work. it is better firstly slow speed,then higher. wear safety glasses it important for safe of eyes. and big hole should be low rotation speed..
  • Rich configuration,Include 1pcs bimetal hole saw 6 inch,1pcs mandrel with pilot drill bit,1pcs extra pilot drill bit,1pcs wrench,1pcs spring..
  • This item is mainly for all kinds of woods and soft material, but not for thick steel plate..
  • The shank of arbor is hex,3/8"(9.5mm),it is distance between two sides. so it is for 10mm (3/8") drill chuck or larger chuck..
Check Stock

GoSports 6\ Hole Saw - Heavy Duty Steel Design - Great for Making Cornhole Boards

  • CONSTRUCTION GRADE: Heat treated carbon steel alloy 6 inch hole saw blade, non-binding clean edge design.
  • PROFESSIONAL CUTTING: Hole saw cuts smooth and even 6 inch diameter holes through wood, drywall, plaster and thin metal.
  • PROJECT TOOL: Built tough for repeat use and handy for working on cornhole boards, air ducts, ceiling lights, speakers and more.
  • DIY READY: Includes everything you need to do-it-yourself, mandrel and drill bit work with any 3/8" or 1/2" drill.
Check Stock

4-1/4 Inch 108mm HSS Bi Metal Hole Saw Cutter with Arbor for Wood , MDF,Metal

  • This hole saw kit includes 1 of 4-1/4” (108mm) hole saw, 1 of 0.43”(11 mm) hex shank large mandrel , 1 of Ø 1/4” (6.35mm) x 3.5" (89mm) Sliver HSS pilot drill bit for wood and soft metal, 1 of Ø 1/4” (6.35mm) x 3.5" (89mm)Black HSS pilot drill bit for hard metal. Max cutting depth: 1-1/2”(38mm).
  • 二,The set includes the most popular hole saw sizes on the market to meet your different demands. Ideal for Wood, Plasterboard, PVC, Drywall, Aluminum, Sheet Metal. Special kit for DIY projects and household maintenance and repair, utilizes alignment window and taller bushings to deliver accurate height placement and straight drilling with the hole saw set...
  • Bi-metal strip is made by laser welding machine and vacuum heat treatment, providing better hardness, strength, and longer life..
  • 100% Satisfaction Guarantee: If you are not satisfied, Free return..
Check Stock

Acekit 2 1/4 inch Hole Saw With 3/8 Arbor HSS Bi-Metal Hole Saw Blade And Variable Teeth Pitch For Wood,Plastic Board,Pipe,Plywood,And Soft Metal Sheet (57mm)

  • 【HIGH PERFORMANCE】the hole saw made of M42 high speed steel and bi-metal ,dual slots for quick remove the chipped material,heavy duty and durable with large and sharp variable teeth pitch for fast and precisely cutting.
  • 【DIMENSIONS】diameter of the hole saw about 57mm for 2 1/4 inch hole cutting, depth of the hole saw about 1 inch (25mm).
  • 【QUICK CHANGE ARBOR】size of the screw in arbor is 3/8 inch for quick change mandrel, fits both 3/8 and 1/2 inch drills.
  • 【BONUS】the hole saw came with a allen wrench for drill bits installation , so you need not to pay extra money for it, and 1 pack of extra drill bits for long term usage.
  • 【WIDE APPLICATION】With the hole saw, you can easily cut precise hole for wood/plywood/laminated/PVC board, plastic pipe, ceiling ,kitchen cabinet hole cutting, you can also use it to cut hole for soft metal sheet (kind remind: for metal sheet cutting constant cooling with water will be good for long-term usage and fast cutting).
Check Stock

Diablo Arbor Hex 3/8in W/Pilot-2nuts

  • Snap lock mandrel system for a quick and easy change with no down time.
  • 3/8" Diablo hole saw mandrel quick change with pilot.
Check Stock

7/16” Hex Shank Hole Saw Arbor, Fits 1-1/4” to 6” Hole Saw Quick Change Heavy Duty Alloy-Steel Mandrel with 3 BONUS 1/4” Precision Drill Bits Replacement

  • 7/16 inches shank hole saw adapter made of top alloy-steel material ensure heavy duty capability and super-fast to attach to speed all your jobs improve your work efficiency.
  • This hole saw arbor fit most brand 1-1/4 to 6 inches hole saw such as Dewalt, Bosch, milwaukee, Cle-Line etc. as long as the hole saw can fit 1/2 thread with 2 pins.
  • One order comes with 1 x Mandrel, 1 x Hex Wrench, and 3 BONUS 1/4” precision HSS Pilot Drill for replacement in order to work smoothly every time without worry of rusting or corrosion slowing or sticking the operation.
  • 0.43 inch Hole Saw Arbor with PIN DRIVE Positive Lock and Quick Change function helping prevent the hole saw from locking on the arbor. This is the preferred design is fast and easy to engage and disengage.
  • 24 MONTHS WARRANTRY: 90 days refund or replacement for no reasons. All your product problems in these 2 years warranty will be solved promptly. Just contact us whenever you have troubles or suggestions.
Check Stock