ReviewsHole boring Tool

Shankly Dial Bore Gauge 0.001m Deep Engine Hole Cylinder Measurement Inside Micrometer Gage Cylinder Tool Kit 2m to 6m Comes with Carrying Case for Bore Measure

  • ✅ ACCURATE & PRECISE: This dial bore gauge is primarily used by machinists to precisely measure the inner diameter of bores in motor engines. When measuring cuts or hole sizes, a dial bore gauge's speed and accuracy can save a lot of time.
  • ✅ MEASURING RANGE: With this dial gauge, you can easily and accurately measure cylinder bores for taper. They have a measuring range of 2-6m and 0.001m and are equipped with a self-centering guiding protective bridge for dependable and repeated use.
  • ✅ WELL-CONSTRUCTED ENGINE TOOL: A dial bore gauge that is built to be irreplaceably reliable and precise, allowing for more efficient and trouble-free repairs. This premium bore gauge is built to last.
  • ✅ HEAVY-DUTY CARRYING CASE: Our bore gauge comes neatly in a tidy blow molded case with a built-in handle and slide latches that will make it simpler for you to keep track of each tool and arrange the entire set.
  • ✅ SATISFACTION GUARANTEED: We stand by the term "quality," and all of your items will arrive in good condition when you order from Shankly. Please contact us if you have any questions about your purchase. We will gladly assist you.
Check Stock

Osborn 77283SP NovoFlex Honing Tool, Silicon Carbide, 1200 Max RPM, 3.5\ Hole Diameter, 3.75\ Item Diameter, 0.25\ Shank Diameter

  • Honing Tool: NovoFlex Flexible Honing tools have round, abrasive beads fastened to the ends of flexible filaments.
  • Self-Centering Tool: This self-centering tool will conform to the bore surface providing a consistent, even surface finish over the life of the tool.
  • Flexible Honing Tool: The actual NovoFlex tool will be approximately 10% larger than the hole size but will easily fit in as it is extremely flexible.
  • Cylinder Hone Brush: The hone brush is perfect for honing brake cylinders.
  • the ATB NovoFlex Flexible Honing Tool will even provide an "edge break" which is not possible with conventional honing stones.
  • Size: 1200 Max RPM, 3.5" Hole Diameter, 3.75" Item Diameter, 0.25" Shank Diameter.
Check Stock

Osborn 77240SP NovoFlex Honing Tool, Silicon Carbide, 1200 Max RPM, 1.5\ Hole Diameter, 1.75\ Item Diameter, 0.25\ Shank Diameter

  • Honing Tool: NovoFlex Flexible Honing tools have round, abrasive beads fastened to the ends of flexible filaments.
  • Self-Centering Tool: This self-centering tool will conform to the bore surface providing a consistent, even surface finish over the life of the tool.
  • Flexible Honing Tool: The actual NovoFlex tool will be approximately 10% larger than the hole size but will easily fit in as it is extremely flexible.
  • Cylinder Hone Brush: The hone brush is perfect for honing brake cylinders.
  • the ATB NovoFlex Flexible Honing Tool will even provide an "edge break" which is not possible with conventional honing stones.
  • Size: 1200 Max RPM, 1.5" Hole Diameter, 1.75" Item Diameter, 0.25" Shank Diameter.
Check Stock

OSCARBIDE 3/4 Shank 8 Pieces/Set Indexable Boring Bars,90 Degree Round Shank Boring Bars with Indexable Carbide Inserts 4 Pieces TCMT21.51 & 4 Pieces TCMT221

  • OSCARBIDE Boring Bar Set ,Bar holders are made of high quality steel with coated, inserts with Tin-coated are made of carbide,for moistureproof, rust-proof,for long time use.
  • Round shanks allow the operator to set positve or negative rake,chip breaker eliminates long stringer chips.
  • Carbide Inserts can be indexed, when it is dull use another sided,It is not necessary to remove tool from chuck or tool post.
  • Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • Replacement insert for this kit ,please search the Asin of item: B07Q2HNGVF & B07R6M1F3H.
Check Stock

Face End Mill Set,MT3-FMB22 Holder Extension,400R-50-22 Face End Mill Cutter,10pcs APMT1604 CNC Carbide Inserts,Good Impact Resistance,High Hardness,for Plate Cutting,Steel Material

  • EMBEDDED TOOL HOLDER: The lathe tool holder is embedded, which is easier to control than the flat-tail type tool holder, with high precision, and the threaded connection hole is connected more closely, which reduces the machining error.
  • HIGH PRECISION PROCESS:Our Mill Cutter kit adopts high-precision machining technology. The high-carbon steel material improves the hardness and durability of the surface, providing a comfortable feeling and beautiful appearance.
  • PROCESSING RANGE: This MT3-FMB22 holder has better cleanness and more stable accuracy, can be used for plate cutting, harden insert used for steel material.
  • WIDELY USED: The lathe holder extension is a commonly used main accessory for mill CNC machine tools, fixture mill cutter machines, horizontal boring machines, ordinary boring and milling machines, drilling machines, bench drills and small machine tools.
  • GOOD IMPACT RESISTANCE: Our face end mill cutter is a good ideal tool for heavy CNC milling cutting,Model: 400R--Inner hole: 22--Number of blades: 4--Inserts type: APMT1604--Inserts quantity: 10pcs.
Check Stock

DIABLO Bi-Metal and Carbide Tipped Hole Saw Set (9-Piece)

  • The Diablo 9-Piece Hole Saw Kit features five hole saw cups (bi-metal and carbide tipped) and Diablo's four piece SnapLock PLUS mandrel system for quick and easy hole saw cup changes for maximum job performance. This new, high performance hole saw set delivers faster cutting performance and increased productivity versus standard bi-metal and carbide-tipped hole saws. Unlike anything on the market, Diablos hole saws and SnapLock Plus mandrel system simplify the attachment process for fast and efficient hole saw mounting. These radical new hole saws provide ultimate cutting length to bore deeper holes in a single pass.
  • and tool-free plug ejection and Variable Tooth Design for faster cuts..
Check Stock

Accusize Industrial Tools 1\ 9 Pieces/Set, Indexable Carbide Turning Tools and Boring Bar, 2988-0001

  • ...ool hardness (HRC up and down 48 degrees) and has nice accuracy.
  • Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
  • Tight impact bolts, simple structure, often applied for small hole processing.
  • Note: due to the slight color change of manual measurement and different display settings, please allow a difference of 1-3 cm.
  • Due to the difference between different monitors, the picture may not reflect the actual color of the item.
Check Stock

This is Not A Drill Funny Carpenter Woodworking Mens T-Shirt

  • ... 4 Flute cutter, 5 size drill bits sets with countersink #4(7/64") #6(9/64") #8(11/64") #10(3/16") #12(7/32") 2 Stop Collar, 1 Allen Wrench. Counter-bore, and wood plugs size 3/8" and 1/2".
  • Bits Secured with Pin Never Come Loose from shank. Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits designed as to work as wood drill bits.
  • DRILL PERFECT tapered hole drill bit every time. Wood drill bit set with counter bore chamfer angle 82-degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality-built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood countersink drill bits set ideal for woodworking. Countersink tool set made with countersink bits for wood.
  • THIRD-PARTY TESTED by US Accredited Lab - HSS M2 Grade 6542 countersink drill bit for wood with tapered drill bits. Wood countersink bit with wi....
Check Stock

OSCARBIDE 1/2'' x 7''Indexable Boring Bar,Right-Hand Sclcr Boring Bar with Carbide Insert CCMT09T304(CCMT32.5),1 Piece

  • Sclcr Boring Bar 1/2" Shank Diameter, Overall Length 7”.
  • Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
  • Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • CCMT09t304(CCMT32.5) Carbide Inserts 80 degree,negative 5 degree end & side cutting angle.
  • Replacement insert for this kit ,please search the Asin of this item:B07W7PVWR1 to buy it.
Check Stock

TJATSE 1/2\ Round Shank Boring Bar Set Premium Indexable Carbide Inserts with Boring Bars CNC Turning Lathe Tool Set for Metal Lathe - 4 Pieces/Set

  • 【Industrial Quality Boring Bar Set】: TJATSE Boring Bar Set are made of Chilled Steel bar holders combine with Tin-coated carbide inserts, sturdy and durable for long time use. Great for semi-finishing on the existing hole cutter, fit boring machine, lathe machine..
  • 【Round Shanks Bar Holder】: Designed with round shank holders which allow the operator to set positve or negative rake, chip breaker eliminates long stringer chips. Positive rake 90-degree lead. Supplied with wrench..
  • 【Indexable Inserts Included】: Come with TCMT21.51 inserts and it can be indexed, when it is dull use another sided, a new cutting edge may be presented by simply indexing the insert. It is versatile and economical..
  • 【Easy Organization And Storage】: Easy reference guide for insert number, screw and other accessories is printed on the tool shank, and The entire turning tool set is contained in a alumium carrying case that protects and organizes each tool and stacks and stores easily..
  • 【TJATSE BRAND WARRANTY】: TJATSE provides an one-year no questions asked replacement warranty and friendly customer service. We aim to provide solutions for industry through both our products and professional service..
Check Stock

Ryker Hole Saw Kit with Arbors and Replacement Drill Bits, Heavy Duty Steel Construction for Boring Wood, Aluminum, Metal, or PVC, Plumbing and DIY Carpentry (Bi Metal - Metal Hole Saw Kit)

  • General Purpose Bi-Metal Hole Saw Set This professional-grade hole saw kit for construction, woodworking, plumbing, and DIY carpentry includes versatile tools for drilling or boring holes including 7 hole saws, arbors, and replacement drill bits..
  • Ultra-Sharp Steel Teeth Our metal hole saws are designed with strong, precision cobalt steel to withstand heavy-duty use on metal, wood, PVC pipes, drywall, plywood, sheet metal, aluminum, plastic, pipes, and other non-ferrous materials..
  • Optimized Hole Saw Cutting Sizes Not every job needs the same size hole which means you need a quick solution to get the job done right the first time. We included 25/32, 1, 1 , 1 9/16, 1 , 2 3/8, and 2 11/16 saws in every tool kit..
  • Low RPM to High-Torque Reliability We use long-lasting cobalt steel in our hole saws to ensure smoother drilling and boring on almost any surface. That makes them ideal for plumbers working with a variety of different metals and materials..
  • Compact, Protective Storage Case Every Ryker Hardware bi-metal hole saw set comes with a rugged storage case to help keep your tools neatly organized and protect them from weather and dirt on the jobsite. A smart choice for home or construction use..
Check Stock