ReviewsHolley 213

NEW NOS SNIPER WET NITROUS PLATE KIT,150-250 ADJUSTABLE HORSEPOWER,10 LB ORANGE BOTTLE,COMPATIBLE WITH 4 BARREL HOLLEY 4150 SQUARE FLANGE),4500 DOMINATOR,SPREAD BORE QUADRA JET & CARTER AFB

  • Brand New NOS Sniper Wet Nitrous Plate Kit, 150-250 Adjustable Horsepower, 10 lb Orange Bottle, Compatible with 4 Barrel Holley 4150 Square Bore & Carter AFB (Holley Part #07002NOS).
  • NOS have built on the very popular, budget friendly, Sniper nitrous kits for those who need a little more power from their engines. The new Sniper 250 kits step up the power potential to an additional 250 horsepower, in a low cost single nitrous plate kit, for the popular carburetors, Holley 4150 (Square Flange) Part #07002NOS, 4500 (Dominator) Part #07003NOS & Spread Bore (Quadra jet) Part #07007NOS..
  • These single stage wet kits have everything needed to add some extra power to your engine. Includes a 10 lb. Sniper orange nitrous bottle, 14 ft. -4AN feed line, stainless bar nitrous plate & the new, large body, Sniper Solenoids. Also included is all the hardware required as well as nitrous & fuel jetting for power levels of 150, 175, 200 & 250 HP..
  • Features: Budget Friendly | Easy to install | All installation hardware included | Up to 250 additional horsepower | Large Nitrous & Fuel Solenoids | Included jetting for 150, 175, 200 & 250 HP | 14' long -4 AN Hose Length.
  • NOTE: It is important to follow the install instructions & to insure the fuel system has the capacity to sup....
Check Stock

3-200 Carburetor Rebuild Kit 37-119 for Holley Vacuum Secondary CFM fit 390-750 cfm 3906 0750 1841849,1850,3310 6619,6909,8007,9834,80457,80463,80508,80529 ROAD DEMON JR tm ROAD DEMON tm

  • Fit:Quick Fuel 3-200 Holley 4160 Carburetor..
  • Fit:390 600 750 CFM,such as 1841849,1850,3310,6619,6909,8007,9834,80457,80463,80508, 80529..
  • Fit:ROAD DEMON JR tm,ROAD DEMON tm,and vacuum secondary SPEED DEMON tm..
  • Includes:O-rings,pump diaphragm,needle and seat,and power valve..
  • Replace:Barry Grant kit P/N 190003 and Holley kits P/N 37-119,37-720,37-754,37-1542..
Check Stock

Banks Power 2020 GM 2500/3500 6.6L L5P Derringer Tuner Gen 2 w/ 1.8in iDash

  • Brand New Edge Insight CTS3 Digital Gauge, Compatible with 1996 & Up OBD-II Vehicles, Produced by Holley Performance Products (Holley Part #84130-3).
  • Upgrade from bulky gauges with this multi-gauge, touch-screen data logger to track important vehicle parameters including EGT, regen cycles, trans....
  • The Insight is the #1 preferred digital gauge monitor in the market today, used by daily drivers and enthusiasts everywhere. The Insight is the most....
  • This is the perfect tool for those who want to monitor their vehicle performance and prefer not to program their vehicle, or for those who already....
  • NOTE: Compatibility with 1998-2005 Dodge/Ram has not been released yet..
Check Stock

WENJTP For Holley 4500 Series Carburetor Throttle Cable Bracket Billet Aluminum Carburetor Bracket with Dual Return Springs Black

  • Function:The Throttle Cable Bracket can helps to solve common engine throttle installation issues, improves your efficiency.The dual return stainless steel springs are adjustable, which is designed to ensure your carbs operation..
  • Compatible: Work great compatible with Chevy Ford Mopar vehicles as you are running for Holley 4500 Dominator carburetor..
  • High Qualitu Material: Made by premium quality billet aluminum material, high temperature and corrosion resistance, ensures its longevity..
  • Fitment: Compatible With Holley 4500 Dominator carburetor..
  • Simple Installation: The dual return stainless steel springs are adjustable, which is designed to ensure your car's operation. Mounting hardware included for simple installation, mount to the carburetor base..
Check Stock

HOLLEY MODULAR LO-RAM EFI MANIFOLD KIT,TOP-FEED PLENUM,BLACK FINISH,COMPATIBLE WITH GM LS1,LS2 & LS6 GEN III & IV ENGINES

  • Brand New Holley Modular Lo-Ram EFI Manifold Kit, Top-Feed Plenum, Black Finish, Compatible with LS1, LS2 & LS 6 Gen III & IV Engines (Part #300-620BK).
  • The 300-620 top-feed plenum entry configuration is designed to allow the included Hi-Ram 105mm plenum top to be fitted to a low-profile base intake manifold. The short runner, low-profile base intake manifold intended for forced induction applications was conceived to package with an air to water plenum mounted intercooler with a shorter overall height than possible with other existing intake manifolds..
  • The Holley LS1/2/6 Lo-Ram intake manifold kits are designed for GM LS Gen III & IV engines equipped with GM LS1/2/6 (cathedral port) cylinder heads. These intake manifolds will work with OE or aftermarket cylinder heads. The fuel rail kits come with 2 sets of brackets: A set for long (usually standard length) fuel injectors & set for short (such as Pico, or LS7) fuel injectors..
  • NOTE: Total Height: Top-Feed Plenum Configuration w/105mm Long. Mount EFI Plenum Top - 9.07" (without intercooler installed) | Top-Feed Plenum Configuration w/105mm Long. Mount EFI Plenum Top, w/ intercooler installed - 9.07" + intercooler thickness.
  • Specs: Brand: Holley EFI | Color: Black | Construction: Cast | Emission Code: 3 ....
Check Stock

Polyseamseal, All Purpose Caulk Sealant, Almond, 10 oz.

  • USB Cable and Charger Head for SC330, SC213BV2, SC118V2, SC628, SC213B, SC118, SC051, SC418 Universal Charging Kit For SC330, SC213V2, SC118, SC628, SC051, SC418.
Check Stock

Red Seats, Volume 2 [Explicit]

  • Brand New Quick Fuel Technology Brawler Street Carburetor, Mechanical Secondaries, 750 CFM, 4150, Red Billet Color (Holley Part #BR-67320).
  • Brawler continues to lead the pack with their newest family of carburetors in a black with red billet color combination. While the look is new, the out of the box performance is the same that you have come to expect from Brawler..
  • Brawler Street carburetors come with red billet metering blocks with the latest technology in air/fuel calibrations for modern street or race engine demands. They also come with red billet throttle bodies for superior durability and throttle shaft stability..
  • Brawler Street models offer all of the options and tunability that you would find from more expensive carburetors in the market, including an electric choke, a beautiful finish, and 4-corner idle adjustment on all mechanical secondary models..
  • NOTE: This model of carburetor has the square bore flange bolt pattern. It can replace Holley, Edelbrock, Carter AFB & Autolite style carburetors with 5 3/16" x 5 5/8" bolt pattern. If you have a spreadbore style intake manifold, you will need an adapter to install this carburetor. Similar to the Mr. Gasket #1932..
Check Stock

ConnectoRF Heavy Duty Quick Change Ratchet Crimping Tool Kit for Coaxial Cable With Crimper Cutter Stripper and 4 Die Sets

  • Crimp Die (HT-3K) for RG8, 11, 174, 179, 213, LMR400 (.100"/ .128"/ .429".
  • Crimp Die (HT-A4) for RG58, 59, 62, 174 (.255"/.187"/.068/213".
  • Crimp Die (HT-3C) for RG58, 59, 62, 6 (.256"/.319"/.068"/.213".
  • Crimp Die (HT-3G) for RG58, 59, 62, 174, Fiber Optic (043"/.068"/.100"/.137"/.213"/.255".
  • Crimp Die (HT-3J) for RG174, 179,, Belden 8218, Fiber Optic (042"/.068"/.078"/.128"/.151"/.178".
Check Stock

Jethro [Universal] Charging Kit for Jethro Model SC490, SC330, SC213V2, SC118, SC628

  • USB Cable and Charger Head for SC330, SC213BV2, SC118V2, SC628, SC213B, SC118, SC051, SC418 Universal Charging Kit For SC330, SC213V2, SC118, SC628, SC051, SC418.
Check Stock

NEW WEIAND OIL PAN KIT,7 QUARTS,GOLD ZINC,8.25" DEPTH,DRAG RACING,COMPATIBLE WITH 1958-1979 SMALL BLOCK CHEV.

  • Brand New Weiand Drag Racing Oil Pan Kit, 7 Quarts, Gold Zinc Finish, Fits 1958-1979 Small Block Chevy Engines, Produced By Holley (Holley Part #5001WND).
  • Fits: 1958-1979 Small Block Chevy | Includes: Application specific oil pan | Oil pan gasket | Oil pump pickup | Pan mounting bolt kit.
  • Features: Trap door baffles keep oil under control during hard acceleration | Increased oil capacity to keep high performance engine oil systems fed properly.
  • Specs: Application: 1958-1979 Small Block Chevy | Brand: Weiand | Crank Scraper Included: No | Dipstick Location: Driver | Emission Code: 5 | Finish: Gold Zinc | Material: Stamped Steel | Oil Pan Capacity: 7 Quarts | Oil Pan Depth: 8.25" | Oil Pan Type: Fabricated | Product Type: Oil Pan Kit | Sump Location: Rear | Windage Tray Included: No.
  • NOTE: Kit designed to work with standard volume oil pumps..
Check Stock

NEW HOLLEY SNIPER EFI SELF-TUNING KIT,800 CFM,BLACK,4BBL,FUEL INJECTION CONVERSION

  • Brand New Holley Sniper EFI Self-Tuning Kit – Black Ceramic Finish, 4 Barrel Fuel Injection Conversion – Self Tuning Kit plus Handheld EFI Monitor. (Part #550-511).
  • Holley just brought EFI within range! Introducing Sniper EFI! It’s economically priced so you can have all the benefits of EFI and still have money to finish or upgrade the rest of your ride! Perfect for street rods, muscle cars, off road trucks or nearly any carbureted vehicle. Put an end to cold start issues, hesitations, vapor lock, and flooding. Upgrade to Sniper EFI and get the tactical accuracy of EFI today!.
  • Specs: CFM: 800 | Coast Guard Approved: Yes | Finish: Black | Flange Style: Dual Bolt Pattern | Fuel Pressure: 58.5 PSI | Height: 3.28″ | Injector Size: 100 lb./hr @58.5 PSI.
  • Inlet/Outlet Size: 9/16-18 Female O-Ring (AN 6) | MAP Sensor: 2Bar | Max Horsepower Rating: 650 Naturally Aspirated | Model: 4150 EFI Conversion Throttle Body | Product Type: EFI | Transmission: 700R4/200R4.
Check Stock