ReviewsHome 3d Printer

15g 3D Printer Glue Sticks, Aitrip 2Pcs Solid Stickers for 3D Printer Hot Bed Print Filament PLA ABS PET PETG and Other More

  • ▌Compatibility: 3D printer glue perfect for all 3D printer hot bed, include build surface sheet plate, aluminum and glass plate,PEI, 3D printer stickers, Kapton etc..
  • ▌Easy to Use : You just need to twist 3D printer adhesive up, spread on an active printing area only, no need to cover the whole surface.
  • ▌Easy to Clean: 3D printer glue stick with water soluble formula, you can just clean it with water after drying.
  • ▌Multi-function: 3D printer bed adhesive not only for 3D Printing, but also for arts and crafts, school projects, and more.
  • ▌Long-lasting: PLA glue Lasts for 100+ average prints.
Check Stock

Tattoos

  • ✪【Easy installation and simple operation】: For beginners, if you don't know how to use 3D slicing software, you can directly download the model file (Gcode file) to the TF card, insert it into the printer, and start printing. Press the "+" button to put the material in. If you need to replace or remove the material, press the "-" button and wait for a while to pull it out. After the material is put in, press the play button to start printing. The X1 3D printer is also suitable for children, but it needs to be done under the guidance of parents..
  • ✪【Important steps】: Leveling is the most important part of using this printer. Press the home button to start leveling, when the nozzle touches the magnetic plate, disconnect the power and start leveling. If the printer is not leveled properly, the magnetic plate may be damaged by being squeezed by the nozzle. If the nozzle is too far from the magnetic plate, the printed model will not stick to the magnetic plate. Please watch the leveling manual or video carefully.
  • ✪【HIGH PRECISION PRINT HEAD】: 3D printer's nozzle uses a professional all-metal nozzle to ensure the best printing tem....
Check Stock

Creality Ender 3 Glass Bed Upgraded Build Surface Plate, 235x235x4mm

  • No Edge Curling - 3D printer coated glass bed, molds could stick on bed firmly without glue, avoiding the issue of print edges curling. A necessary 3d printer upgrade parts..
  • No-indentation Printing - Upgraded Ender 3 glass plate has a much smaller CREALITY logo than older version, avoiding leaving logo indentations on molds surface during 3D printing..
  • Excellent Flatness - Improved 3D printer glass plate provides more flat and more smooth build surface than magnetic mat or pei sticker, ensuring high flatness for the bottom of model..
  • Super Convenient - Very easy to take off the model, no tools needed. This borosilicate glass bed could be fixed with middle sized clips and cleaned with alcohol or acetone at room temperature..
  • Compatibility - The 3D printer parts is applicable with Creality 3D printer Ender-3, Ender-3 Pro, Ender-3S, Ender-3X, Ender-3 V2, Ender-5, Ender-5 Pro and CR-20, CR-20 Pro, pls confirm if this borosilicate glass bed compatible with your printer..
Check Stock

The Cheap Detective

  • ✪【Easy installation and simple operation】: For beginners, if you don't know how to use 3D slicing software, you can directly download the model file (Gcode file) to the TF card, insert it into the printer, and start printing. Press the "+" button to put the material in. If you need to replace or remove the material, press the "-" button and wait for a while to pull it out. After the material is put in, press the play button to start printing. The X1 3D printer is also suitable for children, but it needs to be done under the guidance of parents..
  • ✪【Important steps】: Leveling is the most important part of using this printer. Press the home button to start leveling, when the nozzle touches the magnetic plate, disconnect the power and start leveling. If the printer is not leveled properly, the magnetic plate may be damaged by being squeezed by the nozzle. If the nozzle is too far from the magnetic plate, the printed model will not stick to the magnetic plate. Please watch the leveling manual or video carefully.
  • ✪【HIGH PRECISION PRINT HEAD】: 3D printer's nozzle uses a professional all-metal nozzle to ensure the best printing tem....
Check Stock

ANYCUBIC Mega X FDM 3D Printer and ANYCUBIC PLA 3D Printer Filament(Grey + Black) Bundle

  • ① ANYCUBIC MEGA X 3D Printer, Large Metal FDM 3D Printer with Patented Heatbed and 1kg PLA Filament, Build Size 11.81in(L) X 11.81in(W) X 12in(H).
  • ② ANYCUBIC PLA 3D Printer Filament, 3D Printing PLA Filament 1.75mm Dimensional Accuracy +/- 0.02mm, 1KG Spool (2.2 lbs), Grey.
  • ③ ANYCUBIC PLA 3D Printer Filament, 3D Printing PLA Filament 1.75mm Dimensional Accuracy +/- 0.02mm, 1KG Spool (2.2 lbs), Black.
Check Stock

Introduction to Play Analysis

  • ✪【Easy installation and simple operation】: For beginners, if you don't know how to use 3D slicing software, you can directly download the model file (Gcode file) to the TF card, insert it into the printer, and start printing. Press the "+" button to put the material in. If you need to replace or remove the material, press the "-" button and wait for a while to pull it out. After the material is put in, press the play button to start printing. The X1 3D printer is also suitable for children, but it needs to be done under the guidance of parents..
  • ✪【Important steps】: Leveling is the most important part of using this printer. Press the home button to start leveling, when the nozzle touches the magnetic plate, disconnect the power and start leveling. If the printer is not leveled properly, the magnetic plate may be damaged by being squeezed by the nozzle. If the nozzle is too far from the magnetic plate, the printed model will not stick to the magnetic plate. Please watch the leveling manual or video carefully.
  • ✪【HIGH PRECISION PRINT HEAD】: 3D printer's nozzle uses a professional all-metal nozzle to ensure the best printing tem....
Check Stock

Creality 3D Printer CR-10 S5 CR Touch auto Leveling 3D Aluminum DIY Printer with Resume Print Open Source Large Print Size 500*500*500MM

  • 【THE LARGEST CREALITY 3D PRINTER】 Creality 3D printer CR10 -S5 is the largest 3d printer. The Creality CR-10 S5 desktop 3D printer offers the....
  • 【CR TOUCH AUTO BED LEVELING SENSOR KIT】The Creality Largest FDM 3D printer CR10-S5 new version comes with CR touch. High Precision Intelligence....
  • 【DUAL Z-AXIS AND DUAL MOTOR】Creality CR10S 3d printer has Dual Lead Screw Z-axis design, give much stability and accuracy than single lead screw....
  • 【POWER LOSS RECOVERY AND FILAMENT SENSOR FEATURES】The function of CR10S-5 detecting filament run-out or breakage/power loss and resume printing....
  • 【SOLID GLUE STICK INCLUDED IN PACKAGE 】Creality CR10S 5 has comes with large hot bed, preheating time make longer than others, and there is the....
Check Stock

Youyoute Mini Heater for 3D Printer, Resin 3D Printer Temperature Controller Heating Thermostat Temp Control for LCD DLP 3D Printers

  • 【Use for】Resin 3D printer mini heater designed for Resin 3D printers, it is small but powerful, for use in cold weather. It helps you to heat up the resin and rise the ambient temperature. Make your 3D printer work well, save your time and Resin material..
  • 【Professional design】Our temperature controller use in cold weather,when temperature lower than 75F/24C, will cause so many problems in LCD DLP 3D print. Such as Print not sticking to the bed, Layer adhesion, warming, and so on. Finally, printing fails..
  • 【Professional design】Our 3D printer heater built in high-precision temperature sensor, accurate to 0.1 ℃. Fireproof case, high-quality power cord, all professionally designed for your safe printing..
  • 【Small size】Our 3D printer Thermostat 10.8x5.7x3.2cm/4.25x5.24x1.25 in, 117grams, Prefect for 8-15 inch Resin 3D printer, It only takes 10 minutes from 40F to 80F, for use in cold weather..
  • 【Function】3D printer air controller contains three functions, one is heating, one is Air circulation, and the other is filtering. When the temperature is lower than the set t....
Check Stock

TRONXY X5SA PRO 3D Printer with Glass Bed Upgrade, Full Metal Frame CoreXY Printer with Auto Leveling, OSG Guide Rail+Titan Extruder+Silent Board, Large Build Volume 330×330×400mm

  • [New Upgraded Version] - Professional industrial grade DIY FDM 3D printer, Core XY structure + Square structural support, higher stability. 3D printer large build volume 330×330×400mm. Configuration boost - OSG Dual Guide Rail+Titan Extruder+Glass Bed+Black TR-Sensor, improve the printing effect of the model, small error, high speed and low noise, more smooth to use.
  • [Main Function] - Black Auto Leveling Sensor, one-key leveling,16 points data collection, compensate Z-axis for height deviation, can be detected opaque materials, use with glass beds.
  • Multiple strong timing belts drive, adjustable tension, stable operation and printing accuracy.
  • Filament detector + Resume print function, avoid time and filament waste.
  • [Core Components] - Highly wear-resistant, silent pulley to ensure printing speed.
  • Titan extruder reduces the risk of poor extrusion, support TPU filaments.
  • Dual Z-axis and upgraded motor, precise positioning transmission, stable performance.
  • Two-way fan, maintain better cooling efficiency. Reduce errors in printing, easy to achieve high-precision printing.
  • [Interesting] - DIY assembly type industrial-home dual-purpose 3D machine, suitable for manual skills and experienced large 3D printer enthusiasts, transforming machines and building she....
Check Stock

Sindoh 3DWOX 1 Education Curriculum Bundle – Includes a 3DWOX 1 3D Printer and a Sindoh Success Pack Lesson Plans 18 Month Access to Online Resources

  • Fully assembled: The 3D printer is fully assembled and can be used out of the box without any assembly steps. Build Volume:120 x120x120(mm). And it....
  • Application: suitable for education, animation design, film props and other fields. Especially suitable for beginners, kids. It can be used as....
  • Silent Printing: It uses silent driver chip TMC2208 motherboard and prints with a low decibel, the science education, home use, personal office are....
  • Dual Optical Axis: Professional small 3D printer supported by dual optical axis, which greatly improves the stability of 3D printer frame....
  • After Sale:Technical support and professional customer service(Chinese time,Monday to Friday 8:30-17:00).
Check Stock

MakerBot SKETCH Large Desktop 3D Printer Kit, ISTE-Certified Online Training Teachers and Students, Heated Flex Build Plate, Enclosed Chamber, Access Certified Lesson Plans, 8.7x7.9x9.8in Print Size

  • IDEAL CLASSROOM 3D PRINTER: The MakerBot SKETCH supplies you with what you need to integrate bigger and bolder 3D printing into the new school year successfully including ISTE-Certified self-paced training for one teacher and fifteen students, cloud-based printing file management and 600+ certified lesson plans from educators all across the country.
  • ISTE-CERTIFIED ONLINE TRAINING: With over 15 hours of online student curriculum and a cloud-based software to manage your students’ projects, you can unlock students.
  • creative potential with accessible 3D printing covering printer operation, design-thinking and more.
  • RELIABLE, TINKER-FREE DESIGN: Classroom and home friendly design with enclosed chambers, built-in particulate filters, heated, flexible build plates and intuitive touchscreen controls for easy 3D printing and navigation.
  • WHAT’S INCLUDED: (1) MakerBot SKETCH Large Printer, (3) Spools of classroom-safe MakerBot PLA filament, (2) Build Plates, (1) Spatulas, (1) Snips, (1) Replacement Nozzles, (1) Seats in Teacher Certifications, (15) Seats in Student Certifications, MakerBot Cloud with Print Queuing.
Check Stock