ReviewsHome Automation Remote Control

Remote Control duplicator 315MHz/433MHz Multi-Frequency 4-Key Enhanced Cloning Remote Control Wide Applications Wireless Remote Control Duplicator

  • Hold the copied remote control in one hand and the copying remote control in the other hand. The two remote controls should be as close as possible. Press the buttons of the two remote controls at the same time. After 3 seconds, the LED indicator flashes.
  • Press and hold the two buttons on the front (top) of the remote control. After the lamp flashes in 3 seconds, release one of the C or D keys, and continuously press the C or D button for three times. The LED light continues to flash, indicating that the.
  • Recovery method description: If the useful data is cleared by mistake, you can press the two buttons on the back (below) of the remote control at the same time without re-copying the other remote controllers. After the indicator flashes rapidly for 3 tim.
  • High accuracy and effectiveness of copying, easy and convenient to operate..
  • Wide applications. Wireless remote control duplicator, duplicate your existing remote controllers for car, car sunroofs, garage doors, gate doors, electric doors and windows, heating systems, home automation lighting and alarm system, etc..
Check Stock

Diydeg Remote Controller, Copy Duplicator 315M 433M 4-Key with LED Light Wireless Remote Control, Copying Transmitter for Garage Doors Car

  • Recovery method description: If the useful data is cleared by mistake, you can press the two buttons on the back (below) of the remote control at the same time without re-copying the other remote controllers. After the indicator flashes rapidly for 3 tim.
  • Clear code: Press and hold the two buttons on the front (top) of the remote control. After the lamp flashes in 3 seconds, release one of the C or D keys, and continuously press the C or D button for three times. The LED light continues to flash, indicati.
  • High accuracy of copying and high effective of copying, easy and convenient to operate..
  • Copy: Hold the copied remote control in one hand and the copying remote control in the other hand. The two remote controls should be as close as possible. Press the buttons of the two remote controls at the same time. After 3 seconds, the LED indicator f.
  • Wireless remote control duplicator, duplicate your existing remote controllers for car, car sunroofs, garage doors, gate doors, electric doors and windows, heating systems, home automation lighting and alarm system, etc..
Check Stock

Smart IR Remote Control,All in One IR Blaster Control, Universal WiFi Infrared Remote Control for TV DVD Air Conditioner STB etc,Compatible with Alexa, Google Assistant

  • ...go home to enjoy a comfortable temperature in advance.
  • [Voice control and IFTTT]: Use with Alexa or Google Assistant and IFTTT ("Smart Life" skills/services). The ideal Alexa/Google home furnishings. Use Amazon Echo or Google Nest for simple settings to easily voice control your IR equipment, IFTTT can add more home automation settings. Siri voice control is also available on the iPhone..
  • [Function]: Create multiple timers and custom scenes as needed to control smart home devices. Simple and easy setup can create a smart house for you. NOTE: Require a secured 2.4GHz Wi-Fi networks. It is a remote control (38K kHz) for IR equipment, not a remote control for RF control..
  • [Quality and technical support]: Watch the video to learn how to connect to your phone and how to connect to Alexa. If you have any questions about this project, please contact Frankever customer service to provide professional installation and use instructions. We will make it easy for all customers to use this functional device..
Check Stock

Jimfoty 315M 433M Cloning Remote Controller, Wireless Remote Control, Copy Duplicator Copying Transmitter for Garage Doors Car Sunroofs Car Gate Doors

  • Copy: Hold the copied remote control in one hand and the copying remote control in the other hand. The two remote controls should be as close as possible. Press the buttons of the two remote controls at the same time. After 3 seconds, the LED indicator f.
  • Clear code: Press and hold the two buttons on the front (top) of the remote control. After the lamp flashes in 3 seconds, release one of the C or D keys, and continuously press the C or D button for three times. The LED light continues to flash, indicati.
  • High accuracy of copying and high effective of copying, easy and convenient to operate..
  • Recovery method description: If the useful data is cleared by mistake, you can press the two buttons on the back (below) of the remote control at the same time without re-copying the other remote controllers. After the indicator flashes rapidly for 3 tim.
  • Wireless remote control duplicator, duplicate your existing remote controllers for car, car sunroofs, garage doors, gate doors, electric doors and windows, heating systems, home automation lighting and alarm system, etc..
Check Stock

GE Enbrighten Z-Wave Plus Smart Motion Light Switch, Compatible with Alexa, Google Assistant, SmartThings, Wink, Zwave Hub Required, Repeater/Range Extender, 3-Way Compatible, Black, 35547

  • ... on its own or seamlessly integrates into multi-switch setups with required add-on switches – models 12723, 12728, 46199 or 46200. Up to four add-on switches can be connected to the same device..
  • FULL-HOME COVERAGE – Z-Wave Plus works with all previous Z-Wave generations to allow continued expansion of your home-automation network. The switch is capable of controlling indoor or outdoor fixtures for whole-home automation and repeats your Z-Wave signal from your hub or other devices to extend your range by up to 150ft. Extended signal range increases your home automation coverage to enhance your control..
  • EASY INSTALLATION – Requires indoor in-wall installation with hardwired connections. NEUTRAL WIRE REQUIRED. Includes black, white and light almond cover buttons (wall plate not included). Works with all LED, CFL, incandescent and halogen bulbs as well as other devices. Operating temperature range 32-104 degrees Fahrenheit..
Check Stock

Enbrighten Z-Wave Plus Smart Motion Sensor Light Switch, On/Off, Vacancy / Occupancy Sensor, Includes White and Lt. Almond, Zwave Hub Required, Works with SmartThings, Wink, and Alexa, 26931

  • ...eamlessly integrates into multi-switch setups with required add-on switches – models 12723, 12728, 46199 or 46200. Up to four add-on switches can be connected to the same device.Voltage:120 volt.
  • FULL-HOME COVERAGE – Z-Wave Plus works with all previous Z-Wave generations to allow continued expansion of your home-automation network. The switch is capable of controlling indoor or outdoor fixtures for whole-home automation and repeats your Z-Wave signal from your hub or other devices to extend your range by up to 150ft. Extended signal range increases your home automation coverage to enhance your control..
  • EASY INSTALLATION – Requires indoor in-wall installation with hardwired connections. NEUTRAL WIRE REQUIRED. Includes white and light almond cover buttons (wall plate not included). Works with all LED, CFL, incandescent and halogen bulbs as well as other devices. Operating temperature range 32-104 degrees Fahrenheit..
  • Please refer user guide below for better use.
Check Stock

SunTouch ConnectPlus Programmable Smart Thermostat for Electric Floor Heating with Home Automation

  • This Wi-Fi smart home thermostat enables you to set your clock, read outdoor temperatures, automate temperature control, and program remotely through....
  • Smart home compatible with Amazon Alexa and Hey Google for home automation voice control and you can enable remote software updates.
  • three home screen options: clock, control settings, or weather.
  • This floor heating thermostat can compensate for outdoor weather conditions, auto shut-off for warm weather temperatures, and there is also a maximum....
  • Track your energy use, receive email/text notifications, and access away terminal features at home or remotely as a well as connect to optional....
Check Stock

Enbrighten, White & Light Almond, GE Z-Wave Plus Smart Motion Light Dimmer, Works with Alexa, Google Assistant, SmartThings, Wink, Zwave Hub Required, Repeater/Range Extender, 3-Way Compatible, 26933

  • ...ates perfectly on its own or seamlessly integrates into multi-switch setups with required add-on switches – models 12723 or 46199. Up to four add-on switches can be connected to the same device..
  • FULL-HOME COVERAGE – Z-Wave Plus works with all previous Z-Wave generations to allow continued expansion of your home-automation network. The dimmer is capable of controlling indoor or outdoor fixtures for whole-home automation and repeats your Z-Wave signal from your hub or other devices to extend your range by up to 150ft. Extended signal range increases your home automation coverage to enhance your control..
  • EASY INSTALLATION – Requires indoor in-wall installation with hardwired connections. NEUTRAL WIRE REQUIRED. Includes white and light almond cover buttons (wall plate not included). Full-range dim ability for use with dimmable LEDs and CFLs as well as incandescent and halogen bulbs. Supported wattage – 600W incandescent.
  • 150W LED/CFL. Supported voltage – 120VAC. Operating temperature range 32-104 degrees Fahrenheit..
Check Stock

Deegoo-FPV NEW 12pcs NRF24L01+ 2.4GHz Arduino Wireless RF Transceiver Module

  • Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability, Particularly suitable for industrial control applications..
  • 125 Communications channels, Multi-point communication and frequency hopping to meet the communication needs..
  • Built-in hardware CRC error detection, Multipoint communication address control. Built-in 2.4Ghz antenna..
  • nRF24L01 is a single chip radio transceiver for the worldwide 2.4 - 2.5 GHz ISM band. Compatible with Arduino and Raspberry Pi..
  • Applications: wireless peripherals, remote control systems such as RC vehicles and consumer remote electronics, wireless voice transmission such as VoIP, wireless sensor networks, wireless networks, home and commercial automation..
Check Stock

MChoice❤️Wltoys 12428 12423 FY-01/02/03/04/05 RC Car Parts Rear Drive Shaft Silver

  • ...Pen Stylus Universal For iPhone Ipad For Samsung Tablet Phone PC Amazon Fire TV Stick 4K TV Stick Remote Silicone Case.
  • ???? For Wltoys 12428 12423 FY-01/02/03/04/05 RC Car ???????????? ———– Smart Home Controller Home Home & Living Home & Kitchen Remote Remote Controls Android Home Automation Devices Allone Intelligent Home Furnishing Wireless Remote Switch Intelligent Center IOS Android Mobile Smart Home Automation wireless Orvibo smart home Phone wifi Smartphones squishies slow rising whale squishy 8 plus iphone case 8plus flip cases accesorios for iphone 6 plus accesorios para iphone x apple iphone 8 case.
  • ???? Package Includes：1X Drive Shaft + 6xMachine screw + 1x hex wrench ???????????? ———– Universal Folio Leather Stand Cover Case For 10 10.1 Inch Android Tablet PC MChoice for 7 inch Android Tablet New Universal Leather Flip Stand Case Cover MChoice for Barnes & Noble Nook GlowLight 3 eReader 2017 BNRV520 Slim Case Leather Cover Tablet Cases Tablet Bags, Cases & Sleeves Laptop Sleeves Tablet Accessories Tablet Keyboard Cases Tablet Sleeves Computer External Components Tablet Mounts Tablet Stands Laptop Bags, Cases & Sleeves.
  • ???? Helicopter Toy Remote Controls Remote Qua....
Check Stock

KONOz LUX w Z-Wave Thermostat ((zigbee 3.0))

  • Works with Alexa for voice control (hub required, Alexa device and hub sold separately).
  • 7 day programmable with up to 4 schedules per day. Only supports single stage (Y1) cooling.
  • Remote Control: Monitor and adjust your home's temperature and reduce energy consumption through your smartphone, tablet, or PC.
  • Easy install: Most people install the Trane XR524 thermostat in 30 minutes or less. NOTE: A 24 Volt common and hot wire MUST be connected to the control for operation. See manual for more details..
  • Use It On The Go: The XR524 is Z-Wave compatible for use with leading home automation systems such as Nexia Home Intelligence. Communications: 908.42 MHz (Z-Wave RF).
  • Filter and Maintenance Reminders: Send maintenance notifications and filter alerts to help extend the life of your HVAC system.
Check Stock