ReviewsHonda Motors Crank Case

Oh L'amour - Thomas Tank Engine Sleeve

Material: stainless steel 304. The crankshaft is made of stainless steel, which is more durable than ordinary iron products. Never rust, better protect the crank..
Bushing inner diameter 5/8", outer diameter 3/4", sleeve length about 3", keyway 3/16', stepped key length about 3".
The sleeve key and stepped key are designed to fit perfectly into the 3/16-inch keyway and fit on a 5/8-inch diameter crankshaft, and enlarged to 3/4-diameter through a 3/16-inch key seat.
Replace motors with shafts of different diameters, and replace pulleys with different speeds or belts..
Used in conjunction with gas engine crankshafts to enlarge the crank diameter to fit pulleys, gearboxes, etc..

Check Stock

Yoursme 77080 19mm Harmonic Balancer Socket & 50mm Crankshaft Crank Pulley Wrench Holder Removal Holding Spanner for Honda and Acura Engines

【19mm Harmonic Balancer Socket】Honda engines that use a 19mm hex pulley damper bolt or other 19mm applications. Install/remove Honda 19mm damper....
【Using of 19mm Tool】OAL 89mm, Used with 1/2” square drive.Designed with more than 3 x the mass of standard impact sockets to reduce flex and....
【50mm Removal Holding Spanner】Fits for Honda (most) and Acura engines. Used to maintain the harmonic damper pulley position while....
【Using of 50mm Tool】Used with a 1/2inch breaker bar or ratchet, this crank pulley removal tool prevents the harmonic damper pulley from rotating....
【Premium Support: 】Our focus on products and customer services is 2nd to none. We provide friendly 1 years’ warranty support, easy-to-reach....

Check Stock

YiheoZux YM08 Transom Saver for Boat Outboard Motor Trailering Support with Steering Cylinders Stabilizer Stop Clips

Transom Saver Dimension Length 8.65 Inches.
2 Locks Hydraulic Steering Cylinders Stop Dimension Length 4.15 Inches.
Material with Highest Marine Grade Rubber and Plastic.
Fit Yamaha Suzuki Mercury Honda Evinrude Tohatsu with 3 Rams Trim and Tilt Outboard Motors.

Check Stock

MOSTPLUS Damper Crankshaft Crank Pulley Holder Wrench Holder Removal Tool Compatible with Honda Acura Harmonic 50mm

MOSTPLUS 50mm crankshaft pulley holder tool is designed to aid in the removal and installation of the crank bolt compatible with Honda and compatible....
Used with a 1/2 inch breaker bar or ratchet, this crank pulley removal tool prevents the harmonic damper pulley from rotating while you're removing....
The tools design features a hexagonal shape with a hole in the center of the tool that allows the use of a socket and extension to help loosen or....
Used when loosening/tightening the retaining bolt.
Detailed fitment below, pls check it before purchase.

Check Stock

Zinger Mercury Mariner Outboard Lift,Flywheel Puller Removal Tool 91-849154T1,Lift Ring 91-90455-1

Flywheel puller with crank shaft protector 91-849154T1,Lifting Ring 91-90455-1.
A must have tool when changing Mercury outboard motors on boats and lifting the engine off transom.
Nice craftsmanship and solid. 5/8"-18 TPI Bolt and Lift Ring Threads.
For Most 45HP+ Mercury, Mariner, Force and Yamaha outboard motors with 1 1/2"-16 TPI threads units from the 1960s to present,but pls check thread diameter to verity.
Warm tips: please apply some lube oil on the flywheel and puller tool before use it.Thank you !.

Check Stock

VMS RACING 99-05 Light Weight Billet Aluminum Crankshaft CRANK PULLEY Compatible with Mazda Miata MX5 1999-2005 1.8L BP-4W Engines ONLY OEM SIZE (uses same belts)

Function: This crank pulley tool is used to maintain the harmonic damper pulley position while removing/installing the pulley bolt.
Feature: Used with a 1/2inch breaker bar or ratchet, this crank pulley removal tool prevents the harmonic damper pulley from rotating while you're removing and setting the final torque specification on the pulley bolt..
Design: This 50 mm crank pulley tool socket designed with a hexagonal shape with a hole in the center of the tool that allows the use of a socket and extension to help loosen or tighten the pulley bolt..
Compatibility: This crankshaft pulley wrench holder tool compatible for Honda (most) and Acura engines..
Material: Made of hardened chrome molybdenum steel with great durability to long-lasting service your engine..

Check Stock

Wadoy 3/4 to 1 Inch w/Step Key Gas Engine Pulley Crank Shaft Sleeve Adapter Predator

This steel shaft sleeve adapts a crankshaft from 3/4 inch to 1 inch diameter, it comes with step key that offsets from 3/16 inch to 1/4 inch..
Alters motors with a different diameter shaft and alters pulleys for a different speed or belt..
Reduces the necessity of buying a new motor or pulley to maintain existing components and speed/power requirements..
Adapts larger wheel bores to smaller axles, works with Gas Engine Crank Shafts to enlarge the crank diameter to fit pulleys, gear boxes etc..
Made from cold rolled steel, precision machined and tumbled, high durability..

Check Stock

All Balls Racing 85-1044 Wheel Stud and Nut Kit

Honda TRX200 1990 - 1991. Honda TRX200D 1990 - 1997. Honda TRX200SX 1986 - 1988. Honda TRX250 Recon 1997 - 2001. Honda TRX250TE Recon 2002 - 2018. Honda TRX250TM Recon 2002 - 2018. Honda TRX300 Fourtrax 1988 - 2000. Honda TRX300FW Fourtrax 4x4 1988 - 2000. Honda TRX350FE 2000 - 2006. Honda TRX350FM Fourtrax Rancher 2000 - 2006. Honda TRX350TE 2000 - 2006. Honda TRX350TM Fourtrax Rancher 2000 - 2006. Honda TRX400FA 2004 - 2007. Honda TRX400FGA Fourtrax Rancher 4x4 2004 - 2007. Honda TRX400FW Fourtrax Foreman 4x4 1995 - 2003. Honda TRX420 FA IRS 2009 - 2018. Honda TRX420 FA Solid Axle 2014 - 2018. Honda TRX420 FE 2007 - 2018. Honda TRX420 FM 2007 - 2018. Honda TRX420 FPA IRS 2009 - 2014. Honda TRX420 FPA Solid Axle 2014. Honda TRX420 FPE 2009 - 2013. Honda TRX420 FPM 2009 - 2013. Honda TRX420 TE 2007 - 2016. Honda TRX420 TM 2007 - 2018. Honda TRX450ES 1998 - 2001. Honda TRX450FE/FM 2002 - 2004. Honda TRX450S 1998 - 2001. Honda TRX500FA 2012 - 2018. Honda TRX500FE 2005 - 2018. Honda TRX500FM 2005 - 2013. Honda TRX500FM IRS 2015 - 2018. Honda TRX500FM Solid Axle 2014 - 2018. Honda TRX500FPA 2012 - 2014. Honda TRX500FPE 2007 - 2013. Honda TRX500FPM 2008 - 2013. Honda TRX500TM 2005 - 2006. Honda TRX680 Rincon 2017 - 2018..

Check Stock

All Balls Racing 85-1043 Wheel Stud and Nut Kit

arctic cat 150 utility 2009 - 2018. arctic cat 250 2x4 2006 - 2009. arctic cat 250 dvx 2006 - 2008. arctic cat 300 2x4 2010 - 2016. arctic cat 300 dvx 2009 - 2015. honda atc250r 1985 - 1986. honda atc350x 1985 - 1986. honda trx250r 1986 - 1989. honda trx250x 1987 - 1992. honda trx250x/ex sortras 2001 - 2018. honda trx300 ex 1993 - 2008. honda trx300 x 2009. honda trx400ex 1999 - 2008. honda trx400x 2009 - 2014. honda trx450er 2006 - 2014. honda trx450r 2004 - 2009. honda trx700xx 2008 - 2009..
kit contains all of the components required to properly rebuild the swing arm bearing assembly..
needle bearing shafts are made with scm415/42 bearing steel that has been hardened and precision ground..
all metal bushings are case hardened and plated to prevent wear and corrosion..
pom composite washer bearings replace thru needle washers increased service life and super resistance to water and dirt..

Check Stock

Darton 300-018 Dry Cylinder Sleeve Kit for H22 & H23

[Shaft Sleeve Adapter Kit] This stainless steel shaft sleeve adapts a crankshaft from 3/4” to 1” diameter. It comes with 1.77"" step key..
[ ] Made from stainless steel, precision machined and tumbled, high durability. It is durable in use, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage..
[Applications] Alters motors with a different diameter shaft. Alters pulleys for a different speed or belt. Reduces the necessity of buying a new motor or pulley to maintain existing components and speed/power requirements. Adapts larger wheel bores to smaller axles. Works with Gas Engine Crank Shafts to enlarge the crank diameter to fit pulleys, gear boxes etc..
Perfect Performance] Allows you to use your old clutch or pulley on a new engine, you may need to use a small hammer to gently tap it in to place for tightly fit..
[Package Include] 1 Set Shaft Sleeve Adapter Kit.

Check Stock

Capri Tools 21000 Honda Crank Pulley Removal Tool Black

Easily remove crank pulley bolts on Honda and Acura engines with this tool.
Hardened Chrome-Molybdenum steel is used to form a damage resistant body.
This professional grade tool is compatible with a 50 mm socket with a 1/2-inch drive breaker bar.
Tight hard-to-reach engine spaces are made easily accessible.

Check Stock