ReviewsHoneycomb Breadboard

Vilros Breadboard and Battery Holder Panel for Raspberry Pi Pico (Full Size (800 Hole) Breadboard Compatible)

  • Acrylic board holds a breadboard and a 3 aa Battery Holder for an easy neat setup for your Pico Projects..
  • Designed to Hold a 3 AA Battery Holder and a with Full size 800 Hole Breadboard.
  • Important: Includes Acrylic Panel and velcro strap ONLY.
  • Does NOT Include Battery Holder, Batteries, Breadboard Or Raspberry Pi Pico Board.
Check Stock

AITRIP 10PCS for Nano V3.0 ATmega328P Nano Board CH340 5V 16M Microcontroller Board, Compatible with Arduino Electronics Development Board

  • This board is using the chips ATmega328P and CH340, not FT232 as official Arduino.
  • More Breadboard Space:Nano's got the breadboard-ability of the Boarduino and the Mini USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND ）on one top, power and ground on the other..
  • The Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source..
  • It is a smallest, complete, and breadboard friendly board. It has everything that Diecimila/Duemilanove has (electrically) with more analog input pins and onboard +5V AREF jumper..
  • you will get 10pcs Mini Nano V3.0 ATmega328P 5V 16M Microcontroller.
Check Stock

EPLZON Gold Plated PCB Solder-able Breadboard for DIY Electronics Projects Compatible with DIY Arduino Soldering Projects 2.05"x3.5" (5 Pack + 2 Mini Board, Black)

  • ✅This board is especially useful for preserving a prototype or experiment you just created on a solder-less breadboard by soldering all the pieces in place..
  • ✅Suitable for a variety of MCU boards, compatible with Arduino Nano, ESP8266, NodeMCU, etc.
  • suitable for various DIP type components.
  • suitable for any type of Raspberry Pi GPIO breadboard PCB..
  • ✅Gold plated finish to prevent oxidation, high quality gold finish for easy soldering,and all holes are through-plated for mounting strength.
  • ✅5pcs 2.05"x3.5" PCB Solder-able Breadboard + 2pcs 2.0"x1.5" mini PCB Solder-able Breadboard for prototyping and transferring,Black.
  • ✅Lead-free and RoHS compliant for longer shelf life.
Check Stock

Testeronics 7 in 1 Breadboard Power Module Kit Compatible for Arduino/Raspberry Pi| 2PCS 3.3V/5V Power Supply Modules | 9V/1A Power Adaptor | 2PCS Solderless Breadboard 400 Points|65 PCS Jumper Wires

  • [Breadboard Power Module] Input voltage: 6.5-9V (DC Jack) or USB power supply.
  • [9V / 1A Power Adaptor] Output 9V / 1A DC, Input: 100~240V AC. US Plug 5.5mm x 2.5mm.
  • Compatible for Arduino UNO R3 Mega 2560 1280 ..
  • [400 Breadboard] 400 Points Solderless Breadboard, ABS Plastic Body, Fit for 21-26 AWG (0.4-0.7MM) wire. Compatible for Arduino Nano, ESP32, Raspberry Pi Pico..
  • [DC Power Splitter Cable] 1 Female to 2 Male 5.5mm x 2.1mm DC Power Adapter Splitter Cable.
  • [65 Jumper Wires] 65 PCS 24AWG Breadboard Solid Multi colors pure Copper Jumper Wires Kit.
Check Stock

Vilros BBC Micro:bit V2 Project Starter Kit

  • Includes the BBC micro:bit v2 With 8 accessories to get you started with all kinds of Microbit Projects.
  • The BBC micro:bit v2 (launched November 2020) is the same size and shape as the original micro:bit with many upgrades.
  • Great Introduction to the world of coding.
  • Includes USB cable to code and power and a Battery Holder to power on the go (Batteries NOT included) and 6 Alligator clips, Breadboard, a selection of Jumper wires, a Breakout board to be used with the breadboard and a Panel to hold the battery holder and breadboard and keep your projects neat.
  • All Parts Covered for 1 year under the Vilros Warranty.
Check Stock

Gikfun Large Solder-able Breadboard Gold Plated Finish Proto Board PCB DIY Kit for Arduino GK1008

  • It is the Large Gikfun Solder-able Breadboard.
  • This board is especially useful for preserving a prototype or experiment you just created on a solderless breadboard by soldering all the pieces in place.
  • Gold plated finish prevents oxidation, High quality Gold finish for easy soldering.
  • All holes are through-plated for strength.
  • Pack of 3PCS, Breadboard PCB for any type Raspberry Pi GPIO.
Check Stock

Yahboom Breadboard Dupont Wire Multicolored Jumper Wires 40pin M-F, 40pin M-M, 40pin F-F, 3PCS 830 Point Solderless Prototype PCB Board for Arduino Raspberry Pi Electronic Project

  • 【Pure Copper Breadboard Jumper Wires】40 colored 1 row, 40 composed of 10 colors, can be disassembled for use, PVC material, high temperature resistant wire, more safe and durable.The two ends of the wire are designed with quick wiring ports, which can be used for circuit quickly without soldering..
  • 【120pcs 3 Types M-F M-M F-F】Separable multicolored (10 colors) softness ribbon cables, Each cable length: about 20cm /8-inch.
  • 【3PCS Spliceable Breadboards Kit 830 Point】165×55×10mm,630+200=830 holes，1 terminal strip: 630 jacks，2 distribution strips: 200 jacks，Matching jumper, wire diameter 0.8mm.
  • 【MB-102 ABS Recyclable Experimental Connection Board】White ABS Plastic Body with Black Printed Legend. Color Legend on Distribution Strips.With Self-Adhesive Tape on the Back, Easy to Stick on the Arduino Prototype Shield..
  • 【Application】Good for A-rduino Breadboard Jumper Wires kit Project and other Electrical DIY kits.DIY experiment / Electronic projects / Breadboard / PC motherboard / PCB project.
Check Stock

Treedix 4 Sets GPIO Breakout DIY Breadboard PCB Shield Red Expansion Board Kit Compatible with Raspberry Pi 4 3 2 B+ A+

  • The breadboard can provide a good prototype development platform for Raspberry Pi, and you can build your own circuit on this breadboard and have enough room for more complex circuit designs.
  • Combining the functions of Raspberry Pi GPIO pins to achieve many different functions, you can build an electronic experiment environment.
  • Easy to assemble, prototype breadboard, compatible with GPIO, with write-protected ID EEPROM.
  • With high-quality material, gold plated finish prevents oxidation，all pads from the top to the bottom are plated with holes.
  • We strive to make our 100% meet your requirements, and do our best to satisfy you.
Check Stock

BOJACK 3 Values 130 Pcs Solderless Breadboard 4 Pcs 830 Tie Points & 400 Tie Points & 126 Pcs Flexible Breadboard Jumper Wires

  • BOJACK high quality Solderless Breadboard Assortment Kit.
  • Breadboard is a solderless device for temporary prototype with electronics and test circuit designs. Most electronic components in electronic circuits can be interconnected by inserting their leads or terminals into the holes and then making connections through wires where appropriate..
  • The breadboard has strips of metal underneath the board and connect the holes on the top of the board. Note that the top and bottom rows of holes are connected horizontally and split in the middle while the remaining holes are connected vertically..
  • The Breadboards Can be Spliced According to the Unit, the Structure is Clear in Color..
  • Material: ABS Plastic Panel, Tin Plated Phosphor Bronze Contact Sheet..
Check Stock

Mini Nano V3.0 ATmega328P Microcontroller Board w/USB Cable for Arduino

  • ...ou need an older driver, pls get it from GitHub—please read the link that follows immediate. http://sparks.gogo.co.nz/ch340.html.
  • More detals on how to use it please refer to: http://audiodiwhy.blogspot.com/2018/05/one-cheap-arduino-nano-clone-o-plus-one.html.
  • Small Arduino UNO Board:It is a smallest, complete and breadboard friendly board. It has everything that Arduino/Genuino UNO has (electrically) with more analog input pins and onboard +5V AREF jumper.More Breadboard Space:Nano's got the breadboard-ability of the Boarduino and the Mini+USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other)..
  • Specification:The Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.Usage: The Nano is 100% compatible with Arduino, with the same chips ATmega328P and CH340 with the official version..
Check Stock

Breadboard Solderless Prototype PCB Board ALLUS BB-009 (3pcs) 400 Pin with 4 Power Rails and Double Sided Tape for Raspberry Pi and Arduino

  • Solderless breadboard is convenient for the prototypes and circuit design experiment and other DIY projects. Perfect for Arduino, Raspberry Pi, and other programming boards.
  • Easy to use: the breadboard is made of ABS plastic, each row and columns has corresponding letters and numbers, reduce the mistake handling.
  • Self-adhesive back tape makes it easy to stick on a platform, like the Arduino prototype shield.
  • With tight plug-in contacts, the components will sit well after assembly and nothing will wobble..
  • The jumper wires are easy to insert into the breadboard..
Check Stock