ReviewsHoning Machine Parts

2X42 Super Strop Leather Honing Polishing Belt For 2X42 Belt Sanders (2X42 Leather Belt)

  • 2X42 Super Strop Leather Honing Polishing Belt Super Strop Leather Honing Stropping Belt is fantastic addition to sharpening with a 2X42 Belt Sander. Not only can you use this Leather Strop as the last stage of sharpening, but you can also use it to maintain an edge in between sharpening..
  • Premium Made in USA Buffing compound and brief instructions included. The White Buffing compound is an ultra fine abrasive that is specifically designed to be applied to the Leather Stropping Belt. The buffing compound will help to refine the edge of your knife, removing very small fragments of the Burr or Wire Edge. Removing these fragments can extend the life of the edge..
  • 2 in. X 42 in. Super Strop Leather Honing Belts are made slightly short and may require stretching to be installed. If you believe your belt is too small, Contact us today! We strive to provide the best customer service & support!!.
  • Sharpening with professional results has never been easier on a 2×42 inch belt sander. Fits Popular belt sanders the Harbor Freight, Wen, Rikon and nearly every other 2X48 sander..
  • SUPER STROP LEATHER HONING BELT GUARANTEE | SUPER STROP Premium Leather Honing Belts are guaranteed against manufacturer defects, material defects & User Error. If your Leather Honing Belt o....
Check Stock

Professional Knife Steel Magnetized for Safety Our Honing Rod Has an Oval Handle for a Firm Grip Honing Steel Built For Daily Use Perfect for Chefs and Home Cooks! 10 3 Stripe

  • MAGNETIZED FOR SAFETY: While honing steels (sometimes referred to as sharpening steels) realign your knife’s edge for a sharper cut, they can also....
  • BUILT TO LAST THROUGH YEARS OF USE: Our honing steels are made of high quality, hardened carbon steel. Every material in our honing rods was....
  • NO RUSTING: Once hardened, our honing steels go through our proprietary chromium plating process, which prevents rust and corrosion..
  • RETAINS MORE METAL ON YOUR KNIFE EDGE: Honing steels are designed to be used often, but without taking off too much of your knife’s edge metal. This....
  • DISHWASHER SAFE: While it is not necessary to wash honing steels after each use, it is recommended you wipe the stropping steel down with a wet cloth....
Check Stock

Professional Knife Steel Magnetized for Safety Our Honing Rod Has an Oval Handle for a Firm Grip and is Built For Daily Use Perfect for Chefs and Home Cooks Alike! 10 Luxury

  • MAGNETIZED FOR SAFETY: While honing steels (sometimes referred to as sharpening steels) realign your knife’s edge for a sharper cut, they can also....
  • BUILT TO LAST THROUGH YEARS OF USE: Our honing steels are made of high quality, hardened carbon steel. Every material in our honing rods was....
  • NO RUSTING: Once hardened, our honing steels go through our proprietary chromium plating process, which prevents rust and corrosion..
  • RETAINS MORE METAL ON YOUR KNIFE EDGE: Honing steels are designed to be used often, but without taking off too much of your knife’s edge metal. This....
  • DISHWASHER SAFE: While it is not necessary to wash honing steels after each use, it is recommended you wipe the stropping steel down with a wet cloth....
Check Stock

Professional Knife Steel Magnetized for Safety Our Honing Rod Has an Oval Handle for a Firm Grip and is Built For Daily Use Perfect for Chefs and Home Cooks Alike! 12 3 Stripe

  • MAGNETIZED FOR SAFETY: While honing steels (sometimes referred to as sharpening steels) realign your knife’s edge for a sharper cut, they can also....
  • BUILT TO LAST THROUGH YEARS OF USE: Our honing steels are made of high quality, hardened carbon steel. Every material in our honing rods was....
  • NO RUSTING: Once hardened, our honing steels go through our proprietary chromium plating process, which prevents rust and corrosion..
  • RETAINS MORE METAL ON YOUR KNIFE EDGE: Honing steels are designed to be used often, but without taking off too much of your knife’s edge metal. This....
  • DISHWASHER SAFE: While it is not necessary to wash honing steels after each use, it is recommended you wipe the stropping steel down with a wet cloth....
Check Stock

Osborn 77378SP NovoFlex Honing Tool Silicon Carbide 1200 Max RPM 2.5 Hole Diameter 2.75 Item Diameter 0.25 Shank Diameter

  • Honing Tool: NovoFlex Flexible Honing tools have round, abrasive beads fastened to the ends of flexible filaments.
  • Self-Centering Tool: This self-centering tool will conform to the bore surface providing a consistent, even surface finish over the life of the tool.
  • Flexible Honing Tool: The actual NovoFlex tool will be approximately 10% larger than the hole size but will easily fit in as it is extremely flexible.
  • Cylinder Hone Brush: The brush is perfect for honing brake cylinders.
  • the ATB NovoFlex Flexible Honing Tool will even provide an "edge break" which is....
  • Size: 1200 Max RPM, 2.5" Hole Diameter, 2.75" Item Diameter, 0.25" Shank Diameter.
Check Stock

6 3/4 Width Leather Honing/Stropping Wheel - Fits 1/2 Arbor - Buffing Compound Included

  • 6” (3/4" Width) All Leather Wheel for Stropping/Honing.
  • 1/2” Arbor Hole allows the wheel to fit all bench grinders with a 1/2” arbor.
  • Each of our leather honing wheels has a hand-polished honing surface.
  • Every Leatherbeltman Leather Honing Wheel is tested on a bench grinder at 3400 RPMs before leaving our shop.
  • Proudly Hand Crafted in the USA **We Stand Behind Every Product We Sell With a 100% Satisfaction Guarantee**.
Check Stock

TechDiamondTools 11” Long Leather Paddle Strop for Knife Sharpening, Double Sided Leather Strop, Leather Honing Strop for Sharpening Knives, Leather Strop Sharpener, Leather Stropping Block, 1 Piece H

  • Animal friendly double-sided vegan leather paddle strop for sharpening and honing. 2 sides to use with different polishing compounds and/or different blades. Use a knife strop as a final step in the sharpening process, if you want your tools to remain sharp, and cut smoothly.
  • Leather knife strop is suitable for: knife sharpening and honing, wood carving tools sharpening and honing, razor sharpening and honing, pocket knives and chef’s knives sharpening and honing, chisel sharpening, ax sharpening, etc..
  • One side of the leather strop is rougher than the other one. The dual surfaces in combination with diamond polishing compounds provide just the right amount of abrasion to allow you to sharpen your tools and blades to a micro bevel..
  • Use a rough side of knife honing strop with a polishing paste of lower Grit, and, then, a smooth side with a strop compound of higher grit..
  • Use TechDiamondTools double-sided knife sharpener to sharpen and hone your tools. It’s suitable for all kinds of knives and tools. It will suit a beginner as well as a professional..
Check Stock

3/4X12 Inch 2 Pack Leather Honing Polishing Belt Super Strop With White and Green Compound Fits Ken Onion Work Sharp

  • 3/4 X 12 in. Super Strop Leather Honing Stropping Belts now available in a 2 pack with 2 different buffing and polishing compounds included. This leather belt 2 pack includes both our traditional White Cutting Compound and our BRAND NEW Green Polishing Compound. Specially formulated and Made in the USA. 2 Pack includes 2 Super Strop Leather Honing Belts, the same high quality Leather Stropping Belts are included along with 2 types of sharpening compound.
  • 3/4X12 Super Strop Leather Honing Polishing Belts are designed and guaranteed to run on the Ken Onion Edition Work Sharp Knife and Tool Sharpener..
  • Premium Made in USA White & Green Buffing compound and brief instructions included. The White Buffing compound is an ultra fine abrasive that is specifically designed to be applied to the Leather Stropping Belt. The buffing compound will help to refine the edge of your knife, removing very small fragments of the Burr or Wire Edge. Removing these fragments can extend the life of the edge. The addition of the Green Polishing Compound will allow you to get the finest looking edge..
  • 2 Leather belts are included, One for each of the compounds. The 3/4×12 Leather Belt 2 Pack is our best value with the same great quality 3/4X12 Ken onion Leather belts and the same....
Check Stock

240 Grit, B Grade, Greased Based, Silicon Carbate, Loctite Clover Lapping Compound (1 Each)

  • Price For: Each Color: Gray Application: Lapping, Honing and Grinding Valve Seats, Gear Teeth, Dowel Holes In Dies, Bushings, Flat Surfaces On Seals and Castings, Machining Parts, Shafts, Knives and Cutting Blades Grit: 240 Grade: B Size: 1 lb. Item: Silicon Carbide Grease Mix Container Type: Can Country of Origin (subject to change): United States.
Check Stock

Shun TDM0790 Premier Combination Honing Steel, 9-Inch

  • 9-Inch premier combination honing steel by shun to maintain blade between professional sharpening.
  • Combination honing steel features smooth surface for everyday honing, micro-ribbed surface for weekly maintenance.
  • Walnut laminated PakkaWood d-shaped handle provides maximum comfort.
  • Place steel tip down on a sturdy surface, gently pull blade down from heel to tip 3-4 times and repeat on the other side.
Check Stock

Tormek T-4 Hand Tool Kit (Tormek T-4 Original + Tormek HTK-806 Hand Tool Kit) - sharpener that includes all the necessary jigs for knives, axes, scissors, and carving tools (US Version)

  • A complete sharpening system for hand tools – this bundle combines the Tormek T-4 water-cooled sharpening system with the HTK-806 hand tool sharpening jig and accessory kit.
  • The HTK-806 hand tool kit includes 6 jigs for sharpening hand tools like knives, scissors, axes, carving tools, and comes with its own storage case.
  • The Tormek T-4 Original is Tormek’s 8 inch sharpener. It is a low RPM, water-cooled sharpening system that is built for precision sharpening and long tool life. It will keep your tools and accessories razor sharp and always ready to work. Includes both a grinding and honing wheel.
  • Includes: WM-200 Angle Master, PA-70 honing compound, SP-650 stone grader, SVM-45 knife jig, SVM-00 small knife jig, SVM-140 long knife jig, SVA-170 axe jig, SVX-150 scissor jig, SVS-38 short tool jig, TC-800 storage case. It’s a sharpening shop in a box!.
  • Note: This low RPM machine operates at 115 volts and is designed to work exclusively in North America. If you plan on using this product in a country that operates at 220-240V, you will cause damage to the motor and machine..
Check Stock