ReviewsHoning Machine Universal Joint

HOYIN 2-1/2Inch Wire Cup Brush, 0.020In Stainless Steel,Twist Knotted,5/8inch-11UNC for Angle Grinders

*Feature: 0.020in(0.5mm) high quality stainless steel, 3/4 in.(22mm) trim,Universal 5/8-11 in. threaded arbor,12,500 RPM max..
*ADVANTAGE1:*100% inspected to meet demanding quality specifications,and improve the lifetime and grinding efficiency..
*ADVANTAGE2:Constructed with internal holding plate and oversize UNC thread with the cover between the thread and outer holding plate to ensure consistency and safety and balance which provides smooth performance..
* APPLICATION:Roughening,planing,deburring,edge honing,structuring,descaling,paint stripping,weld seams, derusting, grinding,finishing,polishing and bigger surface treatment of metals, cast steel,non-ferrous metals, steel and alloys ,soft wood and hand wood materials,stainless steel.
MACHINE:Most suitable for angle grinders 4-1/2 to 5 inch..

Check Stock

HORUSDY 3-Piece Impact Universal Joint Swivel Socket Adapter Set, 1/4', 3/8”, 1/2' Drive, 360° degree Chrome Moly steel U Joint Sockets.

Made of heat treated chrome molybdenum steel with a corrosion-resistant black phosphate finish. These universal joints meet and exceed ANSI/ASME standards..
This 3-Piece Impact Universal Joint set includes 1/4, 3/8 and 1/2-inch Drive U-Joints..
The universal joint adopts the innovative ball design to evenly distribute the torque load on the larger surface area and improve the operation range, Full 360° degree motion allows U joint swivel sockets to access complete rotation to reach tight spaces, access hard to reach fasteners..
Spring-loaded detent balls securely latch and through-hole in the drive end locks onto drive tang, It can effectively make up for the defects that the traditional universal joint may be stuck or broken..
High contrast size marking is a permanent laser marker, which can be identified accurately even in weak light..

Check Stock

Surgi-Sharp 1 x30 Leather Belt Knife Sharpening Kit with Surgi-Sharp Universal Angle Guide SS10 and Abrasive Belts High Grit 400 600 800 1000 with Compound

1" x 30" leather honing belt is the key to deburr and hone to a surgical edge, it doesn't get any sharper than this..
3-400 grit abrasive belts, 3-600 grit abrasive belts, 3-800 grit abrasive belts and 3-1000 grit abrasive belts.
Universal Angle Guide ensures you get the right angle every time.
The belts are well suited for many polishing jobs in addition to the outstanding job they do honing tools and knives.
This kit is a must have for pros, small shops and hobbyists.

Check Stock

Comfecto Whetstone Sharpening Stone Holder Sink Bridge with Anti Slip Rubber Material, Adjustable from 5-1/2 to 9 Inch Works with Water Diamond Oil Stones

LONG LASTING USAGE – This diamond stone sharpener is made of durable and high-quality chrome plating steel. Our honing stone holder can endure any harsh sharpness tampering session for years. And to further ensure no rust, you can use sharpening stones oil every once in a while..
UNIVERSAL SINK STONE HOLDER – You can use this sharpening stone stand as waterstone holder or diamond sharpening stone holder. Our sharpening stone sink bridge also works with most standard size oil stone, diamond sharpening stones, whetstone flattening stone, Arkansas, and Japanese stone..
SAFE SHARPENING – Get the most convenient and safe way of honing your knives and sharp home tools by using our sharping stone holder. It's a stable base for any sharpening stones. It's a perfect addition for your waterstone sharpening set! Plus the sharpening stone holder stainless steel adjusting nuts that twist smoothly lets you comfortably change stones as you wish..

Check Stock

Joint Coupling Metal Shaft Coupling Motor Connector - 0.5in×0.9in×2in

CONNECT RIGID RODS-This joint or coupling connects rigid rods whose axes are inclined to each other..
DURABLE-The universal joint is made of premium metal material, which is durable and has a long service life..
COMMON USE-The shaft joint is commonly used for shafts that transmit rotary motion..
BLACK-Our universal coupling is black and has simple appearance, which is not only practical but also beautiful..
WIDE APPLICATION-The U-joint motor connector is widely used for connecting model cars, model ships, robots, etc..

Check Stock

Universal Joint Coupling Metal Shaft Coupling Motor Connector (0.5in×0.9in×2in)

【CONNECT RIGID RODS】This joint or coupling connects rigid rods whose axes are inclined to each other..
【DURABLE】The universal joint is made of premium metal material, which is durable and has a long service life..
【COMMON USE】The shaft joint is commonly used for shafts that transmit rotary motion..
【BLACK】Our universal coupling is black and has simple appearance, which is not only practical but also beautiful..
【WIDE APPLICATION】The U-joint motor connector is widely used for connecting model cars, model ships, robots, etc..

Check Stock

MAEXUS Universal Joint Socket, 1/4\

【Set of 3 Sizes】 MAEXUS universal joint socket, swivel extension drive u-joints drive universal joints, 3 size suitable for connecting various sleeves: 1/4 inch (6.3mm), 3/8 inch (10mm), 1/2 inch (12.5mm). 360° universal rotation, can be used in various spaces, widely used in vehicle transmissions..
【CR-V Material】 The universal joint socket has a mirror polished chrome plating, which is easy to wipe and clean, and is highly corrosion-resistant. Rockwell hardness003e 60 HRC, with good wear resistance. after forging, cold compression, heat treatment, polishing, electroplating exquisite craftsmanship treatment. 20% increase in torque, not easy to break under strong force..
【Secure Connection】 4 detent grooves provide a secure connection with the drive tool, it is suitable for the 4 square hole grooves of all hexagonal side handles, and is suitable for maintenance, car modification, and transformation of wrench sockets, increases flexibility for sockets and drive tools..
【Professional Quality】 Universal Joints are made of high-quality chrome vanadium steel, can provide professional quality work, allowing you to get twice the result with half the effort. Spring-loaded retaining ball latches into sockets and holds them securely in place. Bev....

Check Stock

Universal Joint Coupling Connector, 12mm/0.47in Inner Dia Steering Shaft U Joint Coupler, Metal Motor Connector Coupler for RC Boat Car

Usage: The universal joint coupling is usually used to transfer the axis of rotation.
Ideal Accessories: Ideal accessories for remote control model motors, such as model airplanes, boats and robots.
Connect Joint: This kind of universal joint or coupling connects a rigid rod whose shafts are inclined to each other.
Metal Made Durable: The motor joint is made of high quality metal material, which is durable and has a long service life.
Good Quality: The steering joint is 100% brand new and high quality.

Check Stock

Walfront Motor Shaft Coupling U Joint Coupler Universal Joint Shafts Transmit Rotary Motion Connector ID 12mm OD 24mm

✅【1PC UNIVERSAL JOINT】-- 100% brand new and high quality. Package List: 1 * Universal Joint.
✅【PREMIUM METAL MADE】-- Made of premium metal material, it is durable and has long service life.
✅【COUPLING CONNECT JOINT】-- This joint or coupling connects rigid rods whose axes are inclined to each other.
✅【SHAFTS ROTARY MOTION】-- Material: Metal. It is commonly used for shafts that transmit rotary motion.
✅【MOTOR IDEAL ACCESSORIES】-- Ideal accessories for RC model motor, such as model airplane, boats and robots.

Check Stock

Shun Cutlery Kanso Utility Knife 6\

... corrosion-resistant, razor-sharp cutting edge supported by 420J stainless steel on the blade upper..
Product 1: COMFORTABLE, DURABLE HANDLE: Full-tang handle design made from a textured PP/TPE polymer blend for an easy-to-maintain contemporary look and offers a secure grip with strength and balance..
Product 2: SHUN HONING STEEL: Keep your knife collection in perfect condition with the Shun 9-inch Classic Combination Honing Steel..
Product 2: PROFESSIONAL KNIFE SHARPENING: All knives naturally develop tiny bends through normal use. This honing tool corrects those bends – ensuring the sharpest part of your knife makes contact with the food..
Product 2: COMBINATION HONING ROD: This stainless steel knife sharpener features a smooth side for weekly honing and a micro-ribbed side for monthly honing..
Product 2: BEAUTIFUL, COMFORTABLE HANDLE: The durable, ebony-finished Pakkawood handle is comfortable for both left- and right-handed users. Features a built-in angle guide to help you keep the perfect honing angle..

Check Stock

Osborn 77283SP NovoFlex Honing Tool, Silicon Carbide, 1200 Max RPM, 3.5\ Hole Diameter, 3.75\ Item Diameter, 0.25\ Shank Diameter

Honing Tool: NovoFlex Flexible Honing tools have round, abrasive beads fastened to the ends of flexible filaments.
Self-Centering Tool: This self-centering tool will conform to the bore surface providing a consistent, even surface finish over the life of the tool.
Flexible Honing Tool: The actual NovoFlex tool will be approximately 10% larger than the hole size but will easily fit in as it is extremely flexible.
Cylinder Hone Brush: The hone brush is perfect for honing brake cylinders.
the ATB NovoFlex Flexible Honing Tool will even provide an "edge break" which is not possible with conventional honing stones.
Size: 1200 Max RPM, 3.5" Hole Diameter, 3.75" Item Diameter, 0.25" Shank Diameter.

Check Stock