ReviewsHoning Machine V belt

Work Sharp Knife & Tool Sharpener Ken Onion Edition

  • ADJUSTABLE SHARPENING GUIDE- produce precise edge bevels from 15 to 30 degrees. motor- 120 Vac 1.5 amp. Duty cycle-1 hr. Continuous.
  • VARIABLE SPEED MOTOR- handle every sharpening task, from grinding to honing. More power with improved cooling and the option of slow speed honing or high-speed grinding..
  • PREMIUM FLEXIBLE ABRASIVE BELTS- deliver a strong, long lasting razor-sharp convex edge..
  • FAST, PRECISE, and REPEATABLE- sharpening results with no set up or calibration time. The 6000 grit belt measures .5 x inches for better contact with serrations and other hard to reach edges..
  • PROUD TO BE AN AMERICAN COMPANY- Work Sharp is part of Darex, a 4th-generation family-owned company in Ashland, Oregon. For over 40 years we have been engineering industry-leading sharpening tools..
Check Stock

Tormek T-8 Chef’s Kit (Tormek T-8 Original Sharpener + KJ-45 Centering Knife Jig + KJ-140 Wide Centering Knife Jig + SVM-00 Small Knife Holder Jig + SVX-150 Scissor Jig + MH-380) (US Version)

  • ... This Tormek T-8 Chef's Kit includes all the jigs to keep your kitchen knives and tools sharp. Use the KJ-45 for your knives, the KJ-140 for the longer knives, and the SVM-00 for small knives. Also included is the SVX-150 for your scissors. When you are all finished, cover your machine with the MH-380 machine cover to keep it nice and tidy..
  • The Tormek T-8 is Tormek’s most powerful sharpener. It is a low RPM, water cooled sharpening system that is built for precision sharpening and long tool life. It will keep your tools and accessories razor sharp and always ready to work. Includes both a grinding and honing wheel.
  • Includes: Tormek T-8 Original, SE-77 Square Edge Jig, PA-70 Honing Compound, SP-650 Stone Grader, WM-200 Angle Master, TT-50 Truing Tool, KJ-45 Centering Knife Jig, KJ-140 Wide Centering Knife Jig, SVM-00 Small Knife Holder Jig, SVX-150 Scissor Jig, and MH-380 Machine Cover.
  • Note: This low RPM machine operates at 115 volts and is designed to work exclusively in North America. If you plan on using this product in a country that operates at 220-240V, you will cause damage to....
Check Stock

Imperia La Roccia 3x8 Standard Ultra Fine Hone

  • New Cylinder Engine Hone Kit 2" to 3" Honing Machine + 32 Set Of Stones.
  • Machine Type:Honing Machine Function:HoningModel Year:2021.
Check Stock

Work Sharp Kit Replacement Sharpening Belts, Red

  • Replacement Belt Kit Includes Three Red P120 Medium Belts and Fits the E5 and E3 Sharpeners..
  • Professional Grade Abrasive Belts for Sharpening and Honing. the Abrasives Are Engineered to Constantly Expose a New Surface As They Wear, Creating Consistent Results Throughout the Life-Cycle of the Belt..
  • Manufactured by Norton Abrasives, the Norax Brand Sharpening Belts Are the Same Belts Professional Knife Makers and Sharpening Services Use to Create Factory-Fresh Cutting Edges..
Check Stock

Work Sharp Knife & Tool Sharpener Ken Onion Edition & Official Replacement Belt Kit for the Work Sharp Knife and Tool Sharpener Ken Onion Edition

  • Product 1: ADJUSTABLE SHARPENING GUIDE – produce precise edge bevels from 15° to 30°. motor- 120Vac/1. 5 amp. Duty cycle-1 hr. Continuous.
  • Product 1: VARIABLE SPEED MOTOR – handle every sharpening task, from grinding to honing. More power with improved cooling & the option of slow speed honing or high speed grinding. The variable speed control (1, 200 SFM to 2, 800 SFM) provides you with the optimal belt speed for the task at hand.
  • Product 1: PREMIUM FLEXIBLE ABRASIVE BELTS – deliver a strong, long lasting razor-sharp convex edge.
  • Product 1: FAST, PRECISE, & REPEATABLE – sharpening results with no set up or calibration time. The 6000 grit belt measures ½ x inches) for better contact with Serrations, gut hooks and other hard to reach edges.
  • Product 2: Replacement abrasive belt assortment for the Ken Onion Edition Work Sharp Knife & Tool Sharpener (WSKTS-KO) only.
  • Product 2: Belts are 3/4″ x 12″ (except 6000 Micro-Mesh, which is 1/2″ x 12″) and do not fit any other Work Sharp tools or accessories.
  • Product 2: Replacement abrasive belt assortment for the Ken Onion Edition Work Sharp Knife & Tool Sharpener (WSKTS-KO) only. Not compatible with other Work Sharp tools..
Check Stock

JUKI MO-6714S Industrial 4-Thread Overlock Sewing Machine

  • ✅Thank you! see below full info. on this machine,--- Get your sewing job done real fast with the Juki DDL-8700H sewing machine that can do up to 5500 stitches per minute. This Juki sewing machine has a large 11-inch arm space that lets you work with even large quilts. The stitch length of this 5500 SPM sewing machine goes up to 5mm which gives you a lot of freedom in doing your job..
  • ✅The sewing machine complies with the "Juki Group Green Procurement Guidelines" on the use of hazardous substances, will be delivered in 3 boxes. 1) machine head, & some accessories* 2) servo motor & v belt 3) table top/legs/drawer/*2 spool-Thread Stand Bobbin Winder Oil Pan/Knee Lifter 1 Bobbins 1 Needles Instruction Manual Screw Driver Machine Oil 2-Euro Hinges & 2 Euro Rubber Mounts Table Rest Pin Safety Belt Guard.
  • ✅1) machine head, & some accessories* 2) servo motor & v belt 3) table top/legs/drawer/*2 spool-Thread Stand Bobbin Winder Oil Pan/Knee Lifter 1 Bobbins 1 Needles Instruction Manual Screw Driver Machine Oil 2-Euro Hinges & 2 Euro Rubber Mounts Table Rest Pin Safety Belt Guard.
Check Stock

Tormek T-4 Hand Tool Kit (Tormek T-4 Original + Tormek HTK-806 Hand Tool Kit) - sharpener that includes all the necessary jigs for knives, axes, scissors, and carving tools (US Version)

  • A complete sharpening system for hand tools – this bundle combines the Tormek T-4 water-cooled sharpening system with the HTK-806 hand tool sharpening jig and accessory kit.
  • The HTK-806 hand tool kit includes 6 jigs for sharpening hand tools like knives, scissors, axes, carving tools, and comes with its own storage case.
  • The Tormek T-4 Original is Tormek’s 8 inch sharpener. It is a low RPM, water-cooled sharpening system that is built for precision sharpening and long tool life. It will keep your tools and accessories razor sharp and always ready to work. Includes both a grinding and honing wheel.
  • Includes: WM-200 Angle Master, PA-70 honing compound, SP-650 stone grader, SVM-45 knife jig, SVM-00 small knife jig, SVM-140 long knife jig, SVA-170 axe jig, SVX-150 scissor jig, SVS-38 short tool jig, TC-800 storage case. It’s a sharpening shop in a box!.
  • Note: This low RPM machine operates at 115 volts and is designed to work exclusively in North America. If you plan on using this product in a country that operates at 220-240V, you will cause damage to the motor and machine..
Check Stock

Tormek T-8 Drill Bit Sharpener Kit (Tormek T-8 Original + DBS-22 Drill Bit Sharpening Attachment) also Includes: SP-650, TT-50, SE-77, PA-70, WM-200, and Tormek Handbook. (US Version)

  • Includes: Tormek T-8 Original, SE-77 Square Edge Jig, PA-70 Honing Compound, TT-50 Truing Tool, WM-200 Angle Master, SP-650 Stone Grader, DBS-22 Drill Bit Sharpening Attachment.
  • Note: This low RPM machine operates at 115 volts and is designed to work exclusively in North America. If you plan on using this product in a country that operates at 220-240V, you will cause damage to the motor and machine..
Check Stock

Work Sharp WSGPS-W Pocket Knife Sharpener

  • Replacement Abrasive Belts for Work Sharp Professional Electric Knife Sharpener. Also Fits E5, E4, and E5-NH Sharpeners..
  • 6000 fine grit replacement belts for WSKTS, WSKTS2. For knife honing and maintenance..
  • For use with Work Sharp Knife and Tool Sharpener only.
  • Abrasives: Silicon Carbide (6000) with flexible cotton backing with polymer emulsion cushioning layer..
  • Includes six (6) purple micromesh 6000 grit belts..
Check Stock

1 x 42 Leather Honing & Polishing Belt - Buffing Compound Included

  • The 1” x 42” Leatherbeltman Leather Honing Stropping Belt is a great addition to sharpening with any 1” x 42” Belt Sander.
  • Premium White Diamond Buffing compound and instructions included.
  • Made from Superior Quality leather hides which are consistent in thickness and free from defects.
  • Every 1” x 42” Leather Belt we produce is tested to ensure proper fit before leaving our shop.
  • We Stand Behind Every Product We Sell With a 100% Satisfaction Guarantee**.
Check Stock

Megadyne – Jason Industrial Accu-Link V-Belt - B-Link-6 – 0.66 Inch (21/32) Top Width x 6 Feet Length – Type B / 5L – Adjustable Link V-Belt – Detachable Tab Link V-Belt – (Pack of 1)

  • Jason Industrial Accu-Link Adjustable Link V-Belts Type B(5L) – 0.66 Inch Top Width x 6 Feet Length - are rugged design, field tested and made with the high-quality materials to sustain and survive in harsh conditions. The Jason Accu-Link V-Belts performance is guaranteed, Low Vibration on machines, achieve maximum Horsepower and manufactured to last longer. Can be used either as a single or on multiple V-Belt drives.
  • The Jason Industrial Accu-Link V-Belts are made with rugged Polyester Fabric impregnated with premium Urethane. The adjustable V-Belts are made to fit ARPM pulleys and working temperatures are -13 deg F ( - 25 deg C) to +176 deg F ( + 80 deg C)..
  • The Jason Industrial Accu-Link adjustable V-belts are easy to assemble by hand (no tools required), reduces inventory on Mobile Service trucks, rolls onto drive pulleys like chain – no cords to break, reduced vibration over conventional V-Belts and avoid labor intensive machine dis-assemblies in hard-to-reach areas of the machines..
  • Applications: There are thousands of applications for the Jason Industrial Accu-Link V-Belts. Some of them are Extraction Fans, Exhau....
Check Stock