ReviewsHoning Machining

Osborn 77378SP NovoFlex Honing Tool Silicon Carbide 1200 Max RPM 2.5 Hole Diameter 2.75 Item Diameter 0.25 Shank Diameter

  • Honing Tool: NovoFlex Flexible Honing tools have round, abrasive beads fastened to the ends of flexible filaments.
  • Self-Centering Tool: This self-centering tool will conform to the bore surface providing a consistent, even surface finish over the life of the tool.
  • Flexible Honing Tool: The actual NovoFlex tool will be approximately 10% larger than the hole size but will easily fit in as it is extremely flexible.
  • Cylinder Hone Brush: The brush is perfect for honing brake cylinders.
  • the ATB NovoFlex Flexible Honing Tool will even provide an "edge break" which is....
  • Size: 1200 Max RPM, 2.5" Hole Diameter, 2.75" Item Diameter, 0.25" Shank Diameter.
Check Stock

6 3/4 Width Leather Honing/Stropping Wheel - Fits 1/2 Arbor - Buffing Compound Included

  • 6” (3/4" Width) All Leather Wheel for Stropping/Honing.
  • 1/2” Arbor Hole allows the wheel to fit all bench grinders with a 1/2” arbor.
  • Each of our leather honing wheels has a hand-polished honing surface.
  • Every Leatherbeltman Leather Honing Wheel is tested on a bench grinder at 3400 RPMs before leaving our shop.
  • Proudly Hand Crafted in the USA **We Stand Behind Every Product We Sell With a 100% Satisfaction Guarantee**.
Check Stock

TechDiamondTools 11” Long Leather Paddle Strop for Knife Sharpening, Double Sided Leather Strop, Leather Honing Strop for Sharpening Knives, Leather Strop Sharpener, Leather Stropping Block, 1 Piece H

  • Animal friendly double-sided vegan leather paddle strop for sharpening and honing. 2 sides to use with different polishing compounds and/or different blades. Use a knife strop as a final step in the sharpening process, if you want your tools to remain sharp, and cut smoothly.
  • Leather knife strop is suitable for: knife sharpening and honing, wood carving tools sharpening and honing, razor sharpening and honing, pocket knives and chef’s knives sharpening and honing, chisel sharpening, ax sharpening, etc..
  • One side of the leather strop is rougher than the other one. The dual surfaces in combination with diamond polishing compounds provide just the right amount of abrasion to allow you to sharpen your tools and blades to a micro bevel..
  • Use a rough side of knife honing strop with a polishing paste of lower Grit, and, then, a smooth side with a strop compound of higher grit..
  • Use TechDiamondTools double-sided knife sharpener to sharpen and hone your tools. It’s suitable for all kinds of knives and tools. It will suit a beginner as well as a professional..
Check Stock

3/4X12 Inch 2 Pack Leather Honing Polishing Belt Super Strop With White and Green Compound Fits Ken Onion Work Sharp

  • 3/4 X 12 in. Super Strop Leather Honing Stropping Belts now available in a 2 pack with 2 different buffing and polishing compounds included. This leather belt 2 pack includes both our traditional White Cutting Compound and our BRAND NEW Green Polishing Compound. Specially formulated and Made in the USA. 2 Pack includes 2 Super Strop Leather Honing Belts, the same high quality Leather Stropping Belts are included along with 2 types of sharpening compound.
  • 3/4X12 Super Strop Leather Honing Polishing Belts are designed and guaranteed to run on the Ken Onion Edition Work Sharp Knife and Tool Sharpener..
  • Premium Made in USA White & Green Buffing compound and brief instructions included. The White Buffing compound is an ultra fine abrasive that is specifically designed to be applied to the Leather Stropping Belt. The buffing compound will help to refine the edge of your knife, removing very small fragments of the Burr or Wire Edge. Removing these fragments can extend the life of the edge. The addition of the Green Polishing Compound will allow you to get the finest looking edge..
  • 2 Leather belts are included, One for each of the compounds. The 3/4×12 Leather Belt 2 Pack is our best value with the same great quality 3/4X12 Ken onion Leather belts and the same....
Check Stock

CRAFTSMAN Hand Planer, 6-Amp, 5/64-Inch (CMEW300)

  • Cutting thickness: 0.2"-6.3" (6-160 mm). All-stainless steel & metal material workbench can ensure a smooth wood processing procedure. The HSS blade is not easy to break, extending the service life. A crank handle for easy adjustment of the cutter head height.
  • An Automatic feeding design is available to auto-feed the material.
  • 2 metal return rollers are provided to pass workpieces back effortlessly..
  • Heavy-Duty Stand: There is a heavy-duty stand for a more strong fixation of the wood planer. This portable table planer is compact and space-saving with a detachable stand and foldable extension plates. ABS grooves on both sides are designed for easy mobility..
  • Dust Exhaust Interface: Dust collection pot, inner diameter 1.8 inch/ 45 mm, outer diameter 2 inch/ 50 mm. The dust exhaust interface can connect to dust collectors for easy cleanup of the flying wood chips. Meanwhile, an iron dust cover is available to replace the collector. Both ways can keep your working place tidy and cultivate a pleasant working environment..
  • Safety Precautions: Equipped with power-off protection electromagnetic switch, the over-current protector can be tripped when the motor is overloaded. This design dramatical....
Check Stock

Milling Face, High Temperature Resistance High Speed Good Impact Resistance Facing Cutter, New Coating Technology for Precision Machining Rough Machining

  • Machining Range: precision machining, rough machining, plane processing and step processing..
  • High speed: rotary and milling feed speeds are 3 times faster than normal milling cutters..
  • Made of cemented carbide, which has high hardness with good impact resistance..
  • New coating technology is adopted on the surface, which has good oxidation resistance and high temperature resistance, it can be used for a long time..
Check Stock

DEEFIINE Carbide Tip Wood Lathe Turning Tool Kit, Lathe Roughing and Finishing Hollow Tool Interchangeable Aluminum Alloy Handle with Diamond Round Square Carbide Blade (Metal handle)

  • ...et can provide a smooth and clean cutting effect by four types of cutters designed for different grinding effects. This saves a lot of time when grinding and honing, because you can easily replace the blade when it becomes dull..
  • wood turning Tool kit: The high-quality CNC machining made of square stainless steel makes it stronger, harder and rolls less than round shaft tools. It has a square shaft so that the knife can be used with a flat back. Keep the shelf flat and flush with the floor。.
  • Rotary cutter design: the indexable carbide tool blade can be rotated or replaced to provide new cutting edge when needed..
  • Ergonomic design: the turning tool is equipped with 1pcs frosted handle that fits comfortably in the hand. In addition, it is equipped with an extension handle that can be used in deeper scenes, aluminium oxide alloy handles for grip, comfort and durability. making it a safe choice..
  • woodturningTools and Accessories - 1pcs handle and 1pcs extension bar ,3PCS tool bars with carbide cutters(Round,Square,Diamond),1PCS swan neck carbide cutter hollowing tools, 1pcs T15 wrenc....
Check Stock

Shun TDM0790 Premier Combination Honing Steel, 9-Inch

  • 9-Inch premier combination honing steel by shun to maintain blade between professional sharpening.
  • Combination honing steel features smooth surface for everyday honing, micro-ribbed surface for weekly maintenance.
  • Walnut laminated PakkaWood d-shaped handle provides maximum comfort.
  • Place steel tip down on a sturdy surface, gently pull blade down from heel to tip 3-4 times and repeat on the other side.
Check Stock

SpeTool Tapered Ball Nose End Mill 1/4\ X 3\ with 0.5mm Tip Diameter(0.25mm Radius) Ball Nose 5.26Deg Router Bit for CNC Machine Engraving Carving Bits H-Si Coated

  • 【1】Brand: XJL 【2】Name: Nano Ball Nose End Mill 65° 【3】Material: tungsten steel.
  • Bar: 0.4um granular tungsten steel 【4】Coating layer: NANO.
  • For high-hard materials and high-speed machining fields, the optimized NANO silicon nitride coating makes the tool have high-temperature stability.
  • 【5】Number Of Flutes：2F,Spiral Angle: 35°Double edge belt + Negative rake Angle design 【6】Applicable cutting materials: Alloy steel, carbon steel, quench and tempering steel die steel HRC 55-65° of high hardness materials. 【7】Suitable for machine: CNC machining center, engraving machine, high-speed machine,dry cutting,etc.
  • 【8】Processing methods: finish machining, semi-finish machining, curved surface machining, arc machining, irregular machining.
  • 【9】Main features:milling cutter for high-hardness and high-speed cutting applications. The edge is coated with NANO-BLUE coating, which can directly perform high-speed rough machining and fine machining on heat-treated materials below 65°, reduce the number of tool changes, advance the productivity of machine tools, save the groove design and grinding method of manufacturing time, and have the advantages of high chip conduction, AG, long service life and high surface finish after machining..
Check Stock

POWERTEC 110830 3 x 18 Inch Sanding Belts | 120 Grit Aluminum Oxide Sanding Belt | Premium Sandpaper for Portable Belt Sander – 10 Pack

  • 1X30 Leather Honing Stropping Plus 4 Pack Assorted Sharpening belt Kit. This package is a great introduction to get you sharpening on your 1x30 Belt Sander. Like the popular Harbor Freight 1 X 30 Belt Sander and combination sander. Turn your belt sander into a knife sharpener today. MADE IN USA!!.
  • 120 Grit & 220 Grit Ceramic Sharpening Belts | Ceramic Grain Sharpening and Sanding Belts offer superior longevity and performance. The Ceramic Grain of the 1x30 sharpening belts constantly fractures to expose a sharp cutting surface. The extra flexible backing makes this sharpener's belt kit an ideal option for sharpening and contour sanding on your 1x30 belt sander. Ceramic 1x30 Belts are known to last longer and produce less heat than other materials..
  • 600 Grit & 1000 Grit Silicon Carbide Sharpening Belts | High Grit Silicon carbide abrasive belts are an industry standard for sharpening because of the grain's consistent and fast cutting properties. The silicon carbide grain of the 600 & 1000 grit sharpening belts offers consistent sharpening results..
  • Leather belt sharpening kit includes our Super Strop White Sharpening Compound, also known as buffing compound or rouge, it is specifically designed for powered leather strops. The compound should be applied a....
Check Stock

KUMA Chef Knife Pro Bolster Edition & Kitchen Knife Sharpener Set - 8 Inch Chef's Knife for Carving, Slicing & Steel Honing Rod for Sharpening your Carving Knife, Chopping Knives & More

  • ★ BUNDLE 1 - Set of two: This kitchen set contains a KUMA Chef's Knife Pro Bolster Edition and a KUMA Honing Rod. The kitchen knife will let you slice your meat and vegetables as thin as you like with ease and the honing steel will help you maintain your knife's sharp blade. Furthermore, use your KUMA Honing Rod to recover your older knives’ sharpness that you thought was long gone. Works like MAGIC..
  • ★ Comfort grip handles - With a smooth ergonomic handle you will always have the perfect grip on your honing rod and your kitchen knife. You can sharpen your knife in just a few strokes and slice through veggies or meat like it was butter. Use these kitchen tools for a long time without feeling any fatigue..
  • ★ Easy to use honing steel - We have created the best carbon steel kitchen knife sharpener for YOU. Much simpler than using a sharpening stone.
  • simply strike your blade against the steel rod a few times at a 20-25 degree angle and your knife will get the sharp edge it deserves..
  • ★ Ultra sharp stainless steel blade - Our 3Cr13 stainless steel blade of the KUMA Chef's Knife Pro Bolster Edition is soft yet durable, making it some of the easiest steel to sharpen. It handles corrosion well and resists various acids in daily use. During production ....
Check Stock