ReviewsHorizontal shaft Motor

COLIBROX AS-4FS 1/2 Motor Arbor to 1/2 Threaded Shaft Adapter

  • Converts electric motor to Grinder or Buffing machine.
  • Fits 1/2" Motor Shafts,Converts 1/2" motor shaft to 1/2" Threaded shaft,Wheel Widths Up To 1 1/16 in.
  • Lock on to motor shaft with 2 hex set screws,1/2"-20 Right Hand thread.
  • Holds Grinding wheels, Wire wheels or Buffing wheels with 1/2" hole.
Check Stock

PIKASOLA 1000W 24V Permanent Magnet Wind Turbine Generator 3 Blades Economy Homes Windmill for Wind Solar Hybrid System 2.5m/s Start Wind Speed with Controller for Wind Solar System (24V)

  • 1. Principle: horizontal shaft wind turbine generator, refers to the horizontal installation of shaft, parallel to the ground. The wind drives the blades to generate kinetic energy, which in turn drives the engine to generate electricity. Core components: blade + generator (engine) + rotating body + wind tail.
  • 2. Wind blade: 37.4 inch in length, made of nylon carbon fiber. The longer the blades are, the more kinetic energy they generate and the more power they produce. Nylon material waterproof, corrosion resistant, lightweight, high efficiency..
  • 3. Generator: three-phase permanent magnet synchronous motor. Efficient and compact ac generator with high performance NdFeB permanent magnet. A fully integrated voltage regulator that automatically shuts down when the battery is fully charged. The fan is controlled by MPPT intelligent microprocessor, which can effectively adjust current and voltage.
  • 4. Rotating body: with yaw adjustment system, the wind direction position is automatically read and the rotor position is adjusted to capture the maximum wind energy. The tail fin is designed according to the aerodynamic principle, with low starting speed and low vibration..
  • 5.Remarks: our products are designed after repeated experimental testing, and the parameters....
Check Stock

U-Joint Shaft 15mm ID Universal Joint Coupling Rotatable Double Section Coupling Joint 15 * 32 * 85mm DIY Steering Joint

  • FIRMLY CROSS SHAFT: The double section Cross shaft coupling is applied to rigid rods whose connecting axes are inclined to each other, usually when the rigid rod with complicated path is not easy to work.
  • THICK UNIVERSAL JOINT: This motor connector consists of a pair of hinges that are close together, these hinges are connected by a horizontal axis, and the other end will also move with the free rotation.
  • SPECIFICATIONS: Material: Metal--Inner Diameter: 15mm / 0.6in--Outer Diameter: 32mm / 1.3in--Length: 85mm / 3.3in--Weight: 344g / 12.1oz (approx.).
  • HIGH HARDNESS COUPLING: Our universal joints are made of high-quality metal, which has high hardness, will not be deformed when transmitting torque, is durable and has a long service life.
  • COMPLETE ACCESSORIES:1 x Universal Joint2 x Screws,Widely used for connecting model cars, model ships, robots, etc.
Check Stock

Honhill Mini Buggy Board with Seat Standing Board for Baby Jogger Travel Pram Pushchair Removable Connector Seat and Assembling (Pink)

  • FOR 2-6 YEARS OLD CHILD USE: Buggy board seat fits for 2-6 years old children, having a maximum loading capacity 25kg / 55.12LBS. Saving much attention in taking care two children when going outside..
  • REMOVABLE SEAT: If your child is tired of seating on the board, he can comfortably stand on the longer non-slip pedal. No more dissatisfaction from the child when getting out with them..
  • SPECIFIC DESIGN: Buggy board wit seat is recommended for the strollers that have a horizontal shaft at the rear wheel. The length of the horizontal shaft is greater than 23cm, and the height of the horizontal shaft from the ground is recommended to be 12-17cm. The diameter of the horizontal axis cannot exceed 2.5cm..
  • STRONG LOCKING: The connection between the buggy board and the stroller is firmly connected, locking the wheel frame to avoid loosening, offering an extreme protection to the baby..
  • DECENT SERVICE: Easy to mount and operate. Your purchase is fully protected when ordering it today. If you have any concern, please feel free to contact us..
Check Stock

Honhill Mini Buggy Board with Seat Standing Board for Baby Jogger Travel Pram Pushchair Removable Connector Seat and Assembling (Black)

  • FOR 2-6 YEARS OLD CHILD USE: Buggy board seat fits for 2-6 years old children, having a maximum loading capacity 25kg / 55.12LBS. Saving much attention in taking care two children when going outside..
  • REMOVABLE SEAT: If your child is tired of seating on the board, he can comfortably stand on the longer non-slip pedal. No more dissatisfaction from the child when getting out with them..
  • SPECIFIC DESIGN: Buggy board wit seat is recommended for the strollers that have a horizontal shaft at the rear wheel. The length of the horizontal shaft is greater than 23cm, and the height of the horizontal shaft from the ground is recommended to be 12-17cm. The diameter of the horizontal axis cannot exceed 2.5cm..
  • STRONG LOCKING: The connection between the buggy board and the stroller is firmly connected, locking the wheel frame to avoid loosening, offering an extreme protection to the baby..
  • DECENT SERVICE: Easy to mount and operate. Your purchase is fully protected when ordering it today. If you have any concern, please feel free to contact us..
Check Stock

HVAC Motor 1/100 HP 3000 RPM 120V 3.3

  • Price For: Each Body Dia.: 3.3" Motor Shaft Design: Flat Motor Service Factor: 1.00 Frame: 3.3 Motor Bearings: Sleeve Phase: 1 Max. Ambient Temp.: 40....
  • Duty: Continuous Mounting Pattern: 2-7/8 x 2-7/8 RPM Range: 1801-3000 Voltage: 120 Voltage Compatibility: 115, 120 Shaft Length: 3-1/2" Mounting Stud....
  • Length Less Shaft: 2-7/16" Shaft Dia.: 1/4" Country of Origin (subject to change): Mexico.
Check Stock

Flex Shaft 6mm Shank,Metal Flexible Shaft for Wood Carving Knife Chise Grinder Tool with Hex Wrench,100mm/3.93 Inch(Length)

  • FOREDOM FLEXSHAFT SET MOTOR MAINTENANCE KIT S-93 INNER SHAFT & S-77 OUTER SHEATH.
  • FOREDOM FLEX SHAFT MOTOR PARTS INNER SHAFT & OUTER SHEATH FOREDOM "Original" PARTS - SET OF REPLACEMENT PARTS These are original Foredom Flex Shaft replacement parts, used for the maintenance of your Flex Shaft Motor. Sale is for the set inner and outer replacement parts. The Outer Sheath measures 36-1/4" long, standard material outer sheath comes equipped on most of the standard models. FOREDOM Item Number: S-77 NOVELTOOLS # 0616-77 The Inner Shaft Cable the standard KEY TIP SHAFT, a 39" long inner shaft is used to replace broken or worn shafts. FOREDOM Part Number S-93 NOVELTOOLS # 0616-93 NOTE: Shaft should be greased when replacing part. Please see our store for 1oz Tube of Grease..
Check Stock

New Salt Spreader Motor Replacement For Buyer 1400601SS 1400701SS 2.5-4.5 Cubic YD Conveyor

  • Large Volume Commercial Tailgate Salt Spreader: This spreader features an horizontal auger, stainless steel trough, and a concealed vibrator that allows it to spread bulk salt or a 50/50 sand/salt mix from 3/4 ton and 1 ton trucks.
  • Stand Up To Winter: The hopper's frameless, double-wall corrosion resistant poly construction is durable, has a low-profile and an 11 cubic foot capacity.
  • Dual action lid allows loading from the ground or the truck bed.
  • Property Maintenance: Its 12-inch poly spinner can cast material up to 30 feet and the 1/2 HP, 12V dual shaft gear motor speed is controlled in-cab.
  • Mounts to a 2-inch Class 4 hitch with horizontal and vertical adjustment.
  • We Do Things The Right Way: We design products like we we’re building them for ourselves, because we are.
  • Our teams are staffed with engineers and experts who know how to make a product exceptional.
  • Durable and Dependable: Founded in 1946, Buyers Products has become a leader in the truck equipment industry though our commitment to customer care, innovation, and value across our range of products.
Check Stock

AMRA-37180 AFI 1000 Waterproof Wiper Motor w/ 2.5\ Shaft - 80 Degree

  • The AFI 1000 Waterproof Wiper Motor is a heavy-duty wiper motor capable of powering 18" deluxe arm and 18" deluxe combination at sweep sets of 80 degrees or less..
  • This motor features a fully sealed waterproof housing made of UV stabilized, high-temperature, high-impact thermoplastic..
  • Specifications: 12V. .625" diameter shaft. 2.5" Shaft length. Stall torque: 55 in-lbs. Stall current: 9.8-10.0 amps. No load current: 0.8-1.2 amps. 6.625" L x 3.375" W x 2" D.
  • Heavy-duty motor with anti-rotation drive shaft. Knurled drive shaft and solid brass arm drive nut.
  • Coast to park with adjustable right or left self parking. RF shielded circuitry.
Check Stock

AMRA-36180 * AFI 1000 Waterproof Wiper Motor w/ 1.5\ Shaft - 80 Degree

  • The AFI 1000 Waterproof Wiper Motor is a heavy-duty wiper motor capable of powering 18" deluxe arm and 18" deluxe combination at sweep sets of 80 degrees or less..
  • This motor features a fully sealed waterproof housing made of UV stabilized, high-temperature, high-impact thermoplastic..
  • Specifications: 12V. .625" diameter shaft. 1.5" Shaft length. Stall torque: 55 in-lbs. Stall current: 9.8-10.0 amps. No load current: 0.8-1.2 amps. 6.625" L x 3.375" W x 2" D.
  • Heavy-duty motor with anti-rotation drive shaft. Knurled drive shaft and solid brass arm drive nut.
  • Coast to park with adjustable right or left self parking. RF shielded circuitry.
Check Stock

RC Drive Shaft, 4Pcs CVD Front Rear Drive Shaft Metal Transmission Axle Compatible with Traxxas Slash 4X4 1/10 RC Car(Titanium)

  • 【Parameters】- Connect to motor shaft: 3.18mm/0.12".
  • 【High Quality Material】- Stainless steel, rc boat motor coupler is the high quality replacement part..
  • 【Feature】- This stainless steel flex coupler(with grub screw) is for round end cable,fit for 3.18mm/0.12" motor shaft and 4mm/0.16" flex shaft..
  • 【Application】- The flex shaft collet is compatible with DIY RC model, such as RC boat toy, RC submarine and so on..
Check Stock