ReviewsHose Barb Coupler

1/4'' Swivel Flare Nut x 3/8'' Barb

Brass for corrosion resistance,ductility at high temperatures,and low magnetic permeability..
Connections:Hose Barb x Hose Barb x Hose Barb,3/16"x3/8"x3/16".
T reducing barbed fitting has three openings for connecting your hoses..

Check Stock

JoyTube Brass Hose Barb Fitting Metals Splicer Mender 1/4 Barb Hose Union Fuel Gas Water Air Pack of 12

Connections: 1/4” to 1/4”. Our hose barb fitting is long enough,which make sure it can insert hose but not easy to be apart. Our barb union will provide good seal when you use it to connect hose..
Application of our barb splicer is very wide, such as Temperature control circuits, pneumatic circuits, vacuum and fluid systems test apparatus, lubricant, coolant lines.(Air/Water/Fuel/Boat/Gas) ..
Connects to a hose on both ends. Union coupling for connecting two hoses with the same diameter in a straight run..
Brass barb union for corrosion resistance, ductility at high temperatures, and low magnetic permeability..
The barbed stems create better tight seal on flexible and semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule (not include)..

Check Stock

EVIL ENERGY 6AN Female to 3/8 Push on Hose Barb Fitting Adapter Straight Swivel Aluminum Alloy Black

Female 6AN to 3/8 inch push on hose barb connector is made of aluminum alloy 6061-T6 for the transition from pipe threaded connector to hose ,which is....
-6AN thread size is 9/16 UNF, used for 6AN male thread fitting.
The barb can use in 3/8" inner diameter fuel hose..
Simple installation - Female thread adapter: only need to tighten the thread.barb adapter: put the hose over the barb and use a hose clamp to tighten....
Note：Barbed style fittings are limited to relatively low pressures(usually below 4000 psi)due to the limitations of the soft and flexible....
EVIL ENERGY provide this product have 3-month warranty.Please contact us first if you have any doubts after receiving the product..

Check Stock

Da by 2 pcs 3/8 10mm Brass Tee Barb Fittings for 3/8 ID Hose,6 pcs Stainless Steel Pipe Clamps,3 Way Union Intersection for Water/Fuel/Air T

Packaging Includes：2 Brass hose barb tee fittings, they have three barb 3/8" x 3/8" x 3/8", 6 Stainless steel pipe clamps fit hose outer diameter of 13mm-19mm..
Material: Hose barb made of brass. Pipe clamps all components are all made of 304 stainless steel and will not rust..
Solid Connections:The T shaped hose barb can be solid connected to the hose（Fit hose witch inner diameter of 10mm）,The pipe clamps can create a tight seal on flexible or semi-rigid hose..
Characteristic: Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Stainless steel for corrosion resistance and will not rust, super sturdy..
Heavy T Shaped Brass Barbs and thickened wall, higher strength and very rugged..

Check Stock

Joywayus 3/8 Hose Barb Fitting,Tee 3 way Brass Fitting Intersection/Split Brass Water/Fuel/Air

Connections: Hose Barb x Hose Barb x Hose Barb..
3/8" Barbed fitting has three openings for connecting your 3/8" ID hoses..
Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability..

Check Stock

SUNGATOR 3 Pack Barbed Brass Hose Fittings 1/2 Barb to 1/2 NPT Male Threaded End Fittings Hose Connector Adapter with Sealing Tape and Hose Clamps

【SIZE AND PACKAGING】: 1/2"barb X 1/2"NPT male pipe, package includes 3 hose barb fittings, 1 sealing tape, 3 hose clamps.
【DURABLE】: Made of High quality solid brass, not a cast product and has a thick wall, this hose barb fitting is firm and durable, and provides high resistance to abrasion and corrosion, longer service life than iron and iron galvanized pipe fittings.
【SUPERIOR THREADS】: Deeper and smoother threads with barbed edges provide effective and tight connection, not easy to slip.
【OPERATING TEMPERATURES】: Solid brass can withstand up to 100 °C (212 °F).
【FUNCTION】: Barb head for connecting hoses, NPT male end used to connect NPT pipes, the hose barb fittings can apply to gas, oil and fuel as well as air tools.

Check Stock

uxcell Refrigerant Charging Hose, 1/4 SAE Thread 2.95Ft Length 500PSI Tube, for Home Air Conditioner Refrigeration Maintenance, Yellow

[Material] – Rubber hose and iron connector with copper plating offer flexibility and abrasion resistance ensuring long life and dependability..
[Reliable Connection] – Strong six-sided crimp provides a secure, reliable connection between the hose and barb – even at maximum pressure(Notice:Please also note that our 1/4SAE Thread only fits for the 7/16-20UNF thread.).
[Easy to Install] – 45 degrees bend on the end for convenient access to the adapter on the system. Deep knurling on the Coupler nuts provides a positive grip and enables quick finger-tightening.
[Application] – Great for testing or repairing, such as home or HVAC air conditioner, ductless mini-split AC systems, refrigerator, refrigeration charging, vacuum pump, Pressure gauge, and so on..

Check Stock

SUNGATOR Brass Barbed Hose Fittings 1 Barb to 1 NPT Male Threaded End Hose Barb Pipe Fittings Hose Adapter Connector with Sealing Tape and Hose Clamps 2 Pack

【SIZE AND PACKAGING】: 1"barb X 1"NPT male pipe, package includes 2 hose barb fittings, 1 sealing tape, 2 hose clamps.
【DURABLE】: Made of High quality solid brass, not a cast product and has a thick wall, this hose barb fitting is firm and durable, and provides high resistance to abrasion and corrosion, longer service life than iron and iron galvanized pipe fittings.
【SUPERIOR THREADS】: Deeper and smoother threads with barbed edges provide effective and tight connection, not easy to slip.
【OPERATING TEMPERATURES】: Solid brass can withstand up to 100 °C (212 °F).
【FUNCTION】: Barb head for connecting hoses, NPT male end used to connect NPT pipes, the hose barb fittings can apply to gas, oil and fuel.

Check Stock

Joywayus 3/8\ ID Hose Barb Y Shaped 3 Way Union Fitting Intersection/Split Brass Water/Fuel/Air

Connections: Hose Barb x Hose Barb x Hose Barb..
3/8" Barbed fitting has three openings for connecting your 3/8" ID hoses..
Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability..

Check Stock

Kegco EBSHCK-5T Kegerator Kit, 1 Faucet with Tank, Standard

...or packed with premium features! The top gauge indicates output pressure, while the side gauge tells you what's left in the Co2 tank, so you don't run out of gas during a party. The chrome plated brass body has a large pressure adjustment knob for easy use and includes a manual pressure release valve..
BALL LOCK KEG COUPLERS: This complete ball lock home brew keg tap set includes both a gas in and beer out coupler for easy tapping of ball lock Cornelius Pepsi kegs. The gas in comes with a 1/4" nut and 5/16" hose barb already attached, allowing you to quickly connect it to the same size air line that standard draft beer regulators use. The beer out connector has a 3/16" hose barb that connects to standard 3/16" beer line..
CHROME BEER FAUCET WITH BRASS LEVER: Featuring a forged brass body and highly polished chrome finish, this NSF-approved beer faucet puts a stylish finishing touch on your kegerator at a price you'll love. The brass shaft assembly and lever includes a non-stick ball washer for smooth operation, and the lever has standard threading that is compatible with most branded tap handles..
STANDARD METAL BEER FAUCET WRENCH: This beer faucet spanner wrench is an essential tool that allows you to quickly and confidently loosen or tighten shank col....

Check Stock

LitKiwi 2PCS Stainless Steel 304 Beer Keg Coupler Fitting,Beer Line Connector Kit,Hex Nut 5/8'G Thread x 5/16' Barb Fittings,Suit for 5/16' ID Beer Line Hose with Clamps

★【Great Marterial】Both the fitting and clamp were made of 304 High quality stainless steel which has high temperature ductility, low magnetic permeability,and low carbon content for greater resistance to corrosion..
★【General Size】The Thread—5/8"G(BSP),suit for most American beer keg coupler,the 5/16" Barb suit for beer tube which the ID little less than 5/16",it is bigger than the general-purpose models on the market and can support larger traffic..
★【Professional Design】The swivel nut make the installation easier and faster,the elongated Barb part allows the pipe to be installed deeper, and provides clamps to make the pipe fully stable and not easy to fall off..
★【Wide Application】Use for most American beer keg coupler,connect line to shanks and couplers.Also can use for other scenes which need the 5/8"G thread to 5/16"barb fitting..
★【Package Include】2PCS 5/8"G x 5/16" Barb fittings with 2PCS clamps.If you are not fully satisfied with our product, we will serve you whole heartedly..

Check Stock